The Problem of Adhesion Methods and Locomotion Mechanism Development for Wall-Climbing Robots

This review considers a problem in the development of mobile robot adhesion methods with vertical surfaces and the appropriate locomotion mechanism design. The evolution of adhesion methods for wall-climbing robots (based on friction, magnetic forces, air pressure, electrostatic adhesion, molecular forces, rheological properties of fluids and their combinations) and their locomotion principles (wheeled, tracked, walking, sliding framed and hybrid) is studied. Wall-climbing robots are classified according to the applications, adhesion methods and locomotion mechanisms. The advantages and disadvantages of various adhesion methods and locomotion mechanisms are analyzed in terms of mobility, noiselessness, autonomy and energy efficiency. Focus is placed on the physical and technical aspects of the adhesion methods and the possibility of combining adhesion and locomotion methods

Effects of residual charge on the performance of electro-adhesive grippers

Electro-adhesion is the new technology for constructing gripping solutions that can be used for automation of pick and place of a variety of materials. Since the technology works on the principle of parallel plate capacitors, there is an inherent ability to store charge when high voltage is applied. This causes an increased release time of the substrate when the voltage is switched off. This paper addresses the issue of residual charge and suggests ways to overcome the same, so that the performance of the gripper can be improved in a cycle of pick and release. Also a new universal equation has been devised, that can be used to calculate the performance of any gripping solution. This equation has been used to define a desired outcome (K) that has been evaluated for different configurations of the suggested electro-adhesive gripper

Advanced Bionic Attachment Equipment Inspired by the Attachment Performance of Aquatic Organisms: A Review

In nature, aquatic organisms have evolved various attachment systems, and their attachment ability has become a specific and mysterious survival skill for them. Therefore, it is significant to study and use their unique attachment surfaces and outstanding attachment characteristics for reference and develop new attachment equipment with excellent performance. Based on this, in this review, the unique non-smooth surface morphologies of their suction cups are classified and the key roles of these special surface morphologies in the attachment process are introduced in detail. The recent research on the attachment capacity of aquatic suction cups and other related attachment studies are described. Emphatically, the research progress of advanced bionic attachment equipment and technology in recent years, including attachment robots, flexible grasping manipulators, suction cup accessories, micro-suction cup patches, etc., is summarized. Finally, the existing problems and challenges in the field of biomimetic attachment are analyzed, and the focus and direction of biomimetic attachment research in the future are pointed out

Tunable Reversible Dry Adhesion of Elastomeric Post Enabled by Stiffness Tuning of Microfluidic LMPA Thin Film

The goal of this study is to investigate the effects and underlying mechanisms of stiffness tuning on tunable reversible dry adhesion of an elastomeric post. This research introduces a novel device constructed out of a soft elastomer, polydemethylsiloxane (PDMS), with micro channels injected with low melting point alloy (LMPA) that can soften by applying a voltage. In contrast to traditional handling devices, such as metallic robot handlers, this soft gripper enables compliant manipulation of delicate fragile objects such as a thin glass slide. In this thesis, the design and fabrication of the elastomeric posts and the effects of three adhesion testing conditions will be presented. The first testing condition provided the baseline adhesion values that would be later referenced to certify adhesion reversibility. The second condition demonstrates the device’s ability to change adhesion forces on the spot, or dynamically. The third condition displays the ability of the device to maintain this adhesion change when activated and deactivated repeatedly. Theoretical Finite Element modeling provides insights indicating a maximum adhesion when varying one critical geometrical parameter, which was later confirmed with experiments. Experimental results prove the device’s capability of dynamically tunable reversible dry adhesion. This novel approach to tunable dry adhesion exhibits the feasibility of soft grippers that would not require complicated systems for activation but instead only need low power and simple circuitry, and thus have potential to function as effective soft gripping devices

Developing a 3-DOF Compliant Perching Arm for a Free-Flying Robot on the International Space Station

This paper presents the design and control of the 3-DOF compliant perching arm for the free-flying Astrobee robots that will operate inside the International Space Station (ISS). The robots are intended to serve as a flexible platform for future guest scientists to use for zero-gravity robotics research - thus, the arm is designed to support manipulation research. It provides a 1-DOF underactuated tendon-driven gripper capable of enveloping a range of objects of different shapes and sizes. Co-located RGB camera and LIDAR sensors provide perception. The Astrobee robots will be capable of grasping each other in flight, to simulate orbital capture scenarios. The arm's end-effector module is swappable on-orbit, allowing guest scientists to add upgraded grippers, or even additional arm degrees of freedom. The design of the arm balances research capabilities with Astrobee's operational need to perch on ISS handrails to reduce power consumption. Basic arm functioning and grip strength were evaluated using an integrated Astrobee prototype riding on a low-friction air bearing

Overcoming barriers and increasing independence: service robots for elderly and disabled people

This paper discusses the potential for service robots to overcome barriers and increase independence of elderly and disabled people. It includes a brief overview of the existing uses of service robots by disabled and elderly people and advances in technology which will make new uses possible and provides suggestions for some of these new applications. The paper also considers the design and other conditions to be met for user acceptance. It also discusses the complementarity of assistive service robots and personal assistance and considers the types of applications and users for which service robots are and are not suitable

Humanoid Robot With Turnover Prevention and Self-Weight Compensation

Q-bot is the human-sized carriage robot for lifting heavy weight objects of in-house logistics, such as storehouse and convenience store. The main feature of Q-bot is the adhesion mechanism beneath the foot, called the turnover prevention Universal Vacuum Gripper (in short TP UVG) that holds its body for turnover prevention and self-weight compensation. Turnover prevention is one of the key technologies of in-house logistic robot for effective use of it. Self-weight compensation is another clue for the robot to achieve the labor work in narrow space. TP UVG is achieved both functions by adhering to uneven ground. The other function of Q-bot is multiple objects graspability based on two-sized Universal Vacuum Gripper by dual-armed manipulation. Q-bot also has omnidirectional movability based on mecanum wheels. In this research, we will report on the development of Q-bot and experiments to prevent the robot from falling when it grabs a heavy object while attached to the ground. We also report Q-bot demonstrations of Future Convenience-Store Challenge in the World Robot Summit 2018

非線形弾性要素による内部力補償に基づく無段階変位–力変換機構の創生 ― 微小操作力で強大な磁気力・把持力・制動力・張力を制御可能とするロボット要素 ―

Tohoku University博士（情報科学）thesi