Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions

Traditional power grids are being transformed into Smart Grids (SGs) to address the issues in existing power system due to uni-directional information flow, energy wastage, growing energy demand, reliability and security. SGs offer bi-directional energy flow between service providers and consumers, involving power generation, transmission, distribution and utilization systems. SGs employ various devices for the monitoring, analysis and control of the grid, deployed at power plants, distribution centers and in consumers' premises in a very large number. Hence, an SG requires connectivity, automation and the tracking of such devices. This is achieved with the help of Internet of Things (IoT). IoT helps SG systems to support various network functions throughout the generation, transmission, distribution and consumption of energy by incorporating IoT devices (such as sensors, actuators and smart meters), as well as by providing the connectivity, automation and tracking for such devices. In this paper, we provide a comprehensive survey on IoT-aided SG systems, which includes the existing architectures, applications and prototypes of IoT-aided SG systems. This survey also highlights the open issues, challenges and future research directions for IoT-aided SG systems

Development of Economic Water Usage Sensor and Cyber-Physical Systems Co-Simulation Platform for Home Energy Saving

In this thesis, two Cyber-Physical Systems (CPS) approaches were considered to reduce residential building energy consumption. First, a flow sensor was developed for residential gas and electric storage water heaters. The sensor utilizes unique temperature changes of tank inlet and outlet pipes upon water draw to provide occupant hot water usage. Post processing of measured pipe temperature data was able to detect water draw events. Conservation of energy was applied to heater pipes to determine relative internal water flow rate based on transient temperature measurements. Correlations between calculated flow and actual flow were significant at a 95% confidence level. Using this methodology, a CPS water heater controller can activate existing residential storage water heaters according to occupant hot water demand. The second CPS approach integrated an open-source building simulation tool, EnergyPlus, into a CPS simulation platform developed by the National Institute of Standards and Technology (NIST). The NIST platform utilizes the High Level Architecture (HLA) co-simulation protocol for logical timing control and data communication. By modifying existing EnergyPlus co-simulation capabilities, NIST’s open-source platform was able to execute an uninterrupted simulation between a residential house in EnergyPlus and an externally connected thermostat controller. The developed EnergyPlus wrapper for HLA co-simulation can allow active replacement of traditional real-time data collection for building CPS development. As such, occupant sensors and simple home CPS product can allow greater residential participation in energy saving practices, saving up to 33% on home energy consumption nationally

Smart Grid Communications: Overview of Research Challenges, Solutions, and Standardization Activities

Optimization of energy consumption in future intelligent energy networks (or Smart Grids) will be based on grid-integrated near-real-time communications between various grid elements in generation, transmission, distribution and loads. This paper discusses some of the challenges and opportunities of communications research in the areas of smart grid and smart metering. In particular, we focus on some of the key communications challenges for realizing interoperable and future-proof smart grid/metering networks, smart grid security and privacy, and how some of the existing networking technologies can be applied to energy management. Finally, we also discuss the coordinated standardization efforts in Europe to harmonize communications standards and protocols.Comment: To be published in IEEE Communications Surveys and Tutorial

Generic framework for the personal omni-remote controller using M2MI

A Generic Framework for the Personal Omni-Remote Controller Using M2MI is a master’s thesis outlining a generic framework for the wireless omni-remote controller that controls neighboring appliances by using Many-to-Many Invocation (M2MI). M2MI is an object-oriented abstraction of broadcast communication. First, this paper introduces the history of remote controllers and analyzes omni-remote controller projects made by other researchers in this area, such as the Pebbles PDA project at Carnegie Mellon University and HP’s COOLTOWN project. Second, this paper depicts a generic framework of the personal omni-remote controller system including architecture, type hierarchy, and service discovery. In this framework, a module approach and a decentralized dual-mode service discovery scheme are introduced. When users request a certain type of service, their omni-remote controller application will first discover the available appliances in the vicinity and then bring up the corresponding control module for the target appliance. Thus, users can control the appliance through the User Interface of the control module. To join the omni-remote controller system, servers and clients need to follow the type hierarchy convention of the system. Finally, several implementations are given to show the control of different appliances with different capabilities. These appliances include thermostats, TVs with parental control, and washing machines

Enhancing the efficiency of electricity utilization through home energy management systems within the smart grid framework

The concept behind smart grids is the aggregation of “intelligence” into the grid, whether through communication systems technologies that allow broadcast/data reception in real-time, or through monitoring and systems control in an autonomous way. With respect to the technological advancements, in recent years there has been a significant increment in devices and new strategies for the implementation of smart buildings/homes, due to the growing awareness of society in relation to environmental concerns and higher energy costs, so that energy efficiency improvements can provide real gains within modern society. In this perspective, the end-users are seen as active players with the ability to manage their energy resources, for example, microproduction units, domestic loads, electric vehicles and their participation in demand response events. This thesis is focused on identifying application areas where such technologies could bring benefits for their applicability, such as the case of wireless networks, considering the positive and negative points of each protocol available in the market. Moreover, this thesis provides an evaluation of dynamic prices of electricity and peak power, using as an example a system with electric vehicles and energy storage, supported by mixed-integer linear programming, within residential energy management. This thesis will also develop a power measuring prototype designed to process and determine the main electrical measurements and quantify the electrical load connected to a low voltage alternating current system. Finally, two cases studies are proposed regarding the application of model predictive control and thermal regulation for domestic applications with cooling requirements, allowing to minimize energy consumption, considering the restrictions of demand, load and acclimatization in the system

Design and Implementation of Wireless Smart Home Energy Management System Using Rule-Based Controller

Most residential units still rely on conventional energy supplied by utilities despite the continuous growth of renewable energy resources, such as solar and wind energy systems in power distribution networks. Utilities often use time-of-use energy pricing, which increases the interest of energy consumers, such as those in commercial and residential buildings, in reducing their energy usage. Thus, this work demonstrates the design and implementation of a home energy management (HEM) system that can automatically control home appliances to reduce daily energy and electricity bill. The system consists of multiple smart sockets that can read the power consumption of an attached appliance and actuate its on/off commands. It also consists of several other supporting instruments that provide information to the main controller. The smart sockets and supporting instruments in the system wirelessly provide the necessary data to a central controller. Then, the system analyzes the data gathered from these devices to generate control commands that operate the devices attached to the smart sockets. Control actions rely on a developed online rule-based HEM scheme. The rules of the algorithm are designed such that the lifestyle of the user is preserved while the energy consumption and daily energy cost of the controlled appliances are reduced. Experimental results show that the central controller can effectively receive data and control multiple devices from up to 18 m away without loss of data on the basis of a scheduled user program code. Moreover, online adaptation of the HEM scheme confirms significant reductions in the total daily energy consumption and daily electricity bill of 23.5 kWh and $2.898, respectively. Therefore, the proposed HEM system can be remarkably useful for home owners with high daily energy consumption

A Solution Based on Bluetooth Low Energy for Smart Home Energy Management

The research and the implementation of home automation are getting more popular because the Internet of Things holds promise for making homes smarter through wireless technologies. The installation of systems based on wireless networks can play a key role also in the extension of the smart grid towards smart homes, that can be deemed as one of the most important components of smart grids. This paper proposes a fuzzy-based solution for smart energy management in a home automation wireless network. The approach, by using Bluetooth Low Energy (BLE), introduces a Fuzzy Logic Controller (FLC) in order to improve a Home Energy Management (HEM) scheme, addressing the power load of standby appliances and their loads in different hours of the day. Since the consumer is involved in the choice of switching on/off of home appliances, the approach introduced in this work proposes a fuzzy-based solution in order to manage the consumer feedbacks. Simulation results show that the proposed solution is efficient in terms of reducing peak load demand, electricity consumption charges with an increase comfort level of consumers. The performance of the proposed BLE-based wireless network scenario are validated in terms of packet delivery ratio, delay, and jitter and are compared to IEEE 802.15.4 technology

An investigation into the depiction of smart grid technology

Increasing climate change concerns and depletion of fossil fuels demand greater efficiency in electricity production and consumption. Smart Grid is a vision of an enhanced electricity grid that integrates the electric grid with communication and sensing technologies to improve energy delivery. A number of initiatives have been embarked upon to reach this vision. Databases of Smart Grid projects are being kept to hallmark the state of development and advise future project design. However, to date, there is no method of comparing projects‟ results. This means that it is difficult to identify the most successful projects. In addition, details of projects tend to be descriptive and there is no standard method of representing Smart Grid systems. The first Smart Grid technologies are about to be deployed in homes, and yet, there are little research examining how domestic consumers would react to a full set of Smart Grid technology. This is important because the opinions and participation of domestic consumers could lead to the success or failure of the Smart Grid system. This research aims to device a representation system that enables the comparison of smart grid technology available for the residential consumers in the UK. The objectives are to: (i) review and identify existing representations of home Smart Grid technology; (ii) review and identify the general system representation methods; (iii) develop a representation method that maps and enables the comparison of Smart Grid technology in homes; (iv) validate the design of the representation method with relevant stakeholders. Through a four step methodology these objectives were achieved. Thirty Smart Grid diagrams taken from journals and conference papers were analysed and categorised into five groups based of the type of communication features they contained. The results from this analysis guided the development of a Smart Grid representation method. Two Smart Grid systems that are available on the market were depicted using the representation method and were used to validate the design through interviewing 10 residential electricity consumers. As an outcome, this research had delivered a validated representation method that could be used to depict electricity management systems. It could be adopted by energy companies to convey the functions and benefits of Smart Grid technologies to potential customers