Mission Control Concepts for Robotic Operations: Existing approaches and new Solutions

This paper gives a preliminary overview on activities within the currently ongoing Mission Control Concepts for Robotic Operations (MICCRO) study. The aim of the MICCRO study is to reveal commonalities in the operations of past, current and future robotic space missions in order to find an abstract, representative mission control concept applicable to multiple future missions with robotic systems involved. The existing operational concepts, responsibilities and information flows during the different mission phases are taken into account. A particular emphasis is put on the possible interaction between different autonomous components (on-board and on-ground), their synchronisation and the possible shift of autonomy borders during different mission phases

Advancing automation and robotics technology for the space station and for the US economy: Submitted to the United States Congress October 1, 1987

In April 1985, as required by Public Law 98-371, the NASA Advanced Technology Advisory Committee (ATAC) reported to Congress the results of its studies on advanced automation and robotics technology for use on the space station. This material was documented in the initial report (NASA Technical Memorandum 87566). A further requirement of the Law was that ATAC follow NASA's progress in this area and report to Congress semiannually. This report is the fifth in a series of progress updates and covers the period between 16 May 1987 and 30 September 1987. NASA has accepted the basic recommendations of ATAC for its space station efforts. ATAC and NASA agree that the mandate of Congress is that an advanced automation and robotics technology be built to support an evolutionary space station program and serve as a highly visible stimulator affecting the long-term U.S. economy

Technology for the Future: In-Space Technology Experiments Program, part 2

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiments Program In-STEP 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/ university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part two of two parts and contains the critical technology presentations for the eight theme elements and a summary listing of critical space technology needs for each theme

Automation and robotics for COLUMBUS: An implementation concept for the free flying laboratory (MTFF)

With nearly forty percent of the funding, Germany is the main contributor to the European COLUMBUS Programme, followed by Italy, France and further ESA member states. The COLUMBUS elements are the Attached Laboratory (APM) to be permanently attached to the Space Station FREEDOM, the polar platform (PPF) and the Man Tended Free Flyer (MTFF). The latter element is regarded to be of special interest for the German micro-g community. Until now the implementation of A&R Technologies has not been included as part of the system concept for the COLUMBUS laboratory modules. Yet especially for the Free Flyer, a high degree of A&R will be indispensible. An A&R system concept and implementation options for A&R are given to make the COLUMBUS labs 'intelligent' laboratories in orbit

The Phoenix Drone: An Open-Source Dual-Rotor Tail-Sitter Platform for Research and Education

In this paper, we introduce the Phoenix drone: the first completely open-source tail-sitter micro aerial vehicle (MAV) platform. The vehicle has a highly versatile, dual-rotor design and is engineered to be low-cost and easily extensible/modifiable. Our open-source release includes all of the design documents, software resources, and simulation tools needed to build and fly a high-performance tail-sitter for research and educational purposes. The drone has been developed for precision flight with a high degree of control authority. Our design methodology included extensive testing and characterization of the aerodynamic properties of the vehicle. The platform incorporates many off-the-shelf components and 3D-printed parts, in order to keep the cost down. Nonetheless, the paper includes results from flight trials which demonstrate that the vehicle is capable of very stable hovering and accurate trajectory tracking. Our hope is that the open-source Phoenix reference design will be useful to both researchers and educators. In particular, the details in this paper and the available open-source materials should enable learners to gain an understanding of aerodynamics, flight control, state estimation, software design, and simulation, while experimenting with a unique aerial robot.Comment: In Proceedings of the IEEE International Conference on Robotics and Automation (ICRA'19), Montreal, Canada, May 20-24, 201

Robotics and AI-Enabled On-Orbit Operations With Future Generation of Small Satellites

The low-cost and short-lead time of small satellites has led to their use in science-based missions, earth observation, and interplanetary missions. Today, they are also key instruments in orchestrating technological demonstrations for On-Orbit Operations (O 3 ) such as inspection and spacecraft servicing with planned roles in active debris removal and on-orbit assembly. This paper provides an overview of the robotics and autonomous systems (RASs) technologies that enable robotic O 3 on smallsat platforms. Major RAS topics such as sensing & perception, guidance, navigation & control (GN&C) microgravity mobility and mobile manipulation, and autonomy are discussed from the perspective of relevant past and planned missions

UAV as a Reliable Wingman: A Flight Demonstration

In this brief, we present the results from a flight experiment demonstrating two significant advances in software enabled control: optimization-based control using real-time trajectory generation and logical programming environments for formal analysis of control software. Our demonstration platform consisted of a human-piloted F-15 jet flying together with an autonomous T-33 jet. We describe the behavior of the system in two scenarios. In the first, nominal state communications were present and the autonomous aircraft maintained formation as the human pilot flew maneuvers. In the second, we imposed the loss of high-rate communications and demonstrated an autonomous safe “lost wingman” procedure to increase separation and reacquire contact. The flight demonstration included both a nominal formation flight component and an execution of the lost wingman scenario

Fault-tolerant formation driving mechanism designed for heterogeneous MAVs-UGVs groups

A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper

Modeling, Stability Analysis, and Testing of a Hybrid Docking Simulator

A hybrid docking simulator is a hardware-in-the-loop (HIL) simulator that includes a hardware element within a numerical simulation loop. One of the goals of performing a HIL simulation at the European Proximity Operation Simulator (EPOS) is the verification and validation of the docking phase in an on-orbit servicing mission.....Comment: 30 papge

Real-time control architecture for a multi UAV test bed

The purpose of this thesis is to develop a control architecture running at real-time for a multi unmanned aerial vehicle test bed formed by three AscTec Hummingbird mini quadrotors. The reliable and reconfigurable architecture presented here has a FPGA-based embedded system as main controller. Under the implemented control system, different practical applications have been performed in the MARHES Lab at the University of New Mexico as part of its research in cooperative control of mobile aerial agents. This thesis also covers the quadrotor modeling, the design of a position controller, the real-time architecture implementation and the experimental flight tests. A hybrid approach combining first-principles with system identification techniques is used for modeling the quadrotor due to the lack of information around the structure of the onboard controller designed by AscTec. The complete quadrotor model structure is formed by a black-box subsystem and a point-mass submodel. Experimental data have been gathered for system identification and black-box submodel validation purposes; while the point-mass submodel is found applying rigid-body dynamics. Using the dynamical model, a position control block based in lead-lag and PI compensators is developed and simulated. Improvements in trajectory tracking performance are achieved estimating the linear velocity of the aerial robot and incorporating velocity lead-lag compensators to the control approach. The velocity of the aerial robot is computed by numerical differentiation of position data. Simulation results to a variety of input signals of the control block in cascade with the complete dynamic model of the quadrotor are included. The control block together with the velocity estimation is fully programmed in the embedded controller. A graphical user interface, GUI, as part of the architecture is designed to display real-time data of position and orientation streamed from the motion tracking system as well as to contain useful user controllers. This GUI facilitates that a single operator conducts and oversees all aspects of the different applications where one or multiple quadrotors are used. Experimental tests have helped to tune the control parameters determined by simulation. The performance of the whole architecture has been validated through a variety of practical applications. Autonomous take off, hovering and landing, target surveillance, trajectory tracking and suspended payload transportation are just some of the applications carried out employing the real-time control architecture proposed in this thesis