8 research outputs found
Off-chip Communications Architectures For High Throughput Network Processors
In this work, we present off-chip communications architectures for line cards to increase the throughput of the currently used memory system. In recent years there is a significant increase in memory bandwidth demand on line cards as a result of higher line rates, an increase in deep packet inspection operations and an unstoppable expansion in lookup tables. As line-rate data and NPU processing power increase, memory access time becomes the main system bottleneck during data store/retrieve operations. The growing demand for memory bandwidth contrasts the notion of indirect interconnect methodologies. Moreover, solutions to the memory bandwidth bottleneck are limited by physical constraints such as area and NPU I/O pins. Therefore, indirect interconnects are replaced with direct, packet-based networks such as mesh, torus or k-ary n-cubes. We investigate multiple k-ary n-cube based interconnects and propose two variations of 2-ary 3-cube interconnect called the 3D-bus and 3D-mesh. All of the k-ary n-cube interconnects include multiple, highly efficient techniques to route, switch, and control packet flows in order to minimize congestion spots and packet loss. We explore the tradeoffs between implementation constraints and performance. We also developed an event-driven, interconnect simulation framework to evaluate the performance of packet-based off-chip k-ary n-cube interconnect architectures for line cards. The simulator uses the state-of-the-art software design techniques to provide the user with a flexible yet robust tool, that can emulate multiple interconnect architectures under non-uniform traffic patterns. Moreover, the simulator offers the user with full control over network parameters, performance enhancing features and simulation time frames that make the platform as identical as possible to the real line card physical and functional properties. By using our network simulator, we reveal the best processor-memory configuration, out of multiple configurations, that achieves optimal performance. Moreover, we explore how network enhancement techniques such as virtual channels and sub-channeling improve network latency and throughput. Our performance results show that k-ary n-cube topologies, and especially our modified version of 2-ary 3-cube interconnect - the 3D-mesh, significantly outperform existing line card interconnects and are able to sustain higher traffic loads. The flow control mechanism proved to extensively reduce hot-spots, load-balance areas of high traffic rate and achieve low transmission failure rate. Moreover, it can scale to adopt more memories and/or processors and as a result to increase the line card\u27s processing power
FlexWAFE - eine Architektur für rekonfigurierbare-Bildverarbeitungssysteme
Recently there has been an increase in demand for high-resolution digital media content in both cinema and television industries. Currently existing equipment does not meet the requirements, or is too costly. New hardware systems and new programming techniques are needed in order to meet the high-resolution, high-quality, image requirements and reduce costs. The industry seeks a flexible architecture capable of running multiple applications on top of standard off-the-shelf components, with reduced development time.
Until now, standard practice has been to develop specialized architectures and systems that target a single application. This has little flexibility and leads to high developments costs, every new application is designed almost from scratch.
Our focus was to develop an architecture that is suited to image stream processing and has the flexibility to run multiple applications using the same FPGA-based hardware platform. The novelty in our approach is that we reconfigure parts of the architecture at run-time, but without incurring in the time and added constraints penalty of FPGA-partial-reconfiguration techniques. The architecture uses a hierarchical control structure that is well suited to parallel processing, and allows single cycle latency reconfiguration of parts of the processing pipeline. This is achieved using relatively little resources for the distributed control structures.
To test the developed architecture a complex film-grain noise reduction algorithm was implemented on an off-the-shelf hardware platform developed by Thomson-Grass Valley. The system meet all the requirements and had very little load on the hierarchical control structures, there is growth headroom for much complexer control demands.
The architecture has been ported to other hardware platforms, and other applications have been implemented as well. The run-time reconfigurability has proven to be a key factor in the success of the FlexWAFE.Kürzlich gab es eine Zunahme der Nachfrage nach hochauflösenden digitalen Medieninhalten in den Kino- und Fernsehenindustrien. Derzeit vorhandene Systeme entsprechen nicht den Anforderungen, oder sind zu teuer. Neue Hardware-Systeme und neuer Programmiertechniken sind erforderlich, um den hochauflösenden, hochwertigen, Bildanforderungen zu genügen und Kosten zu verringern. Die Industrie sucht eine flexible Architektur zur Ausführung mehrerer Anwendungen auf Standard-Komponenten, mit reduzierten Entwicklungszeiten.
Bis jetzt ist gängige Praxis, spezialisierten Architektur und Systeme zu entwickeln, die eine einzelne Anwendung zielen. Dieses hat wenig Flexibilität und führt zu hohe Entwicklungskosten, jede neue Anwendung ist fast von Grund auf neu konzipiert.
Unser Fokus war es, eine für Bild Verarbeitung geeignet Architektur zu entwickeln dass die Flexibilität hat mehrere Anwendungen an dieselbe FPGA-basierte Hardware-Plattform zu laufen. Die Neuheit in unserem Ansatz ist, dass wir Teile der Architektur zur Laufzeit rekonfigurieren, aber, ohne das Zeit und constraints strafe von FPGA Partielle-Rekonfiguration-Techniken. Die Architektur verwendet eine hierarchische Kontrollstruktur, die zur parallel Verarbeitung gut geeignet ist, und Single-Cycle-Latenz Rekonfiguration von Teilen der Verarbeitungs-Pipeline ermöglicht. Dieses wird unter Verwendung relativ weniger Ressourcen für die verteiltes Steuerung Strukturen erzielt.
Um das entwickelte Architektur zu testen ein komplexer Film-Korn-Rauschunterdrückung Algorithmus wurde auf einer von Thomson-Grass Valley entwickelt standard Hardware-Plattform umgesetzt. Das System erfüllt alle Anforderungen und hatte sehr wenig Last auf den hierarchischen Kontrollstrukturen, es gibt viel Wachstum Spielraum für viel kompliziertere Steuerunganforderungen.
Die Architektur ist zu anderen Hardwareplattformen portiert worden, und andere Anwendungen wurden ebenfalls implementiert. Der Laufzeitreconfigurability ist ein Schlüsselfaktor im Erfolg des FlexWAFE gewesen
Developing a Flexible Interface for RapidIO, Hypertransport, and PCI-Express
In communication centric application domains flexible interfaces are required to support the variety of recently emerged and still evolving high-speed serial interconnect standards. To develop such interfaces, typical application scenarios have to be identified, and common functionality and specific characteristics of the selected standards need to be analyzed. The results of this analysis can then guide the exploration of the design space. In this paper, we present a methodology which is tailored to the characteristics of serial interconnects. We use Click models for analysis and abstraction of the communication protocols and explore flexible interfaces within a cycle-accurate architecture development framework. Our results show the feasibility of implementing a flexible interface on a packet engine similar to those used in network processors. Based on our findings, we believe that flexible interfaces will form a new family of building blocks for future Systems-on-Chip.