Performance Analysis Of Hybrid Ai-Based Technique For Maximum Power Point Tracking In Solar Energy System Applications

Demand is increasing for a system based on renewable energy sources that can be employed to both fulfill rising electricity needs and mitigate climate change. Solar energy is the most prominent renewable energy option. However, only 30%-40% of the solar irradiance or sunlight intensity is converted into electrical energy by the solar panel system, which is low compared to other sources. This is because the solar power system\u27s output curve for power versus voltage has just one Global Maximum Power Point (GMPP) and several local Maximum Power Points (MPPs). For a long time, substantial research in Artificial Intelligence (AI) has been undertaken to build algorithms that can track the MPP more efficiently to acquire the most output from a Photovoltaic (PV) panel system because traditional Maximum Power Point Tracking (MPPT) techniques such as Incremental Conductance (INC) and Perturb and Observe (P&Q) are unable to track the GMPP under varying weather conditions. Literature (K. Y. Yap et al., 2020) has shown that most AIbased MPPT algorithms have a faster convergence time, reduced steady-state oscillation, and higher efficiency but need a lot of processing and are expensive to implement. However, hybrid MPPT has been shown to have a good performance-to-complexity ratio. It incorporates the benefits of traditional and AI-based MPPT methodologies but choosing the appropriate hybrid MPPT techniques is still a challenge since each has advantages and disadvantages. In this research work, we proposed a suitable hybrid AI-based MPPT technique that exhibited the right balance between performance and complexity when utilizing AI in MPPT for solar power system optimization. To achieve this, we looked at the basic concept of maximum power point tracking and compared some AI-based MPPT algorithms for GMPP estimation. After evaluating and comparing these approaches, the most practical and effective ones were chosen, modeled, and simulated in MATLAB Simulink to demonstrate the method\u27s correctness and dependability in estimating GMPP under various solar irradiation and PV cell temperature values. The AI-based MPPT techniques evaluated include Particle Swarm Optimization (PSO) trained Adaptive Neural Fuzzy Inference System (ANFIS) and PSO trained Neural Network (NN) MPPT. We compared these methods with Genetic Algorithm (GA)-trained ANFIS method. Simulation results demonstrated that the investigated technique could track the GMPP of the PV system and has a faster convergence time and more excellent stability. Lastly, we investigated the suitability of Buck, Boost, and Buck-Boost converter topologies for hybrid AI-based MPPT in solar energy systems under varying solar irradiance and temperature conditions. The simulation results provided valuable insights into the efficiency and performance of the different converter topologies in solar energy systems employing hybrid AI-based MPPT techniques. The Boost converter was identified as the optimal topology based on the results, surpassing the Buck and Buck-Boost converters in terms of efficiency and performance. Keywords—Maximum Power Point Tracking (MPPT), Genetic Algorithm, Adaptive Neural-Fuzzy Interference System (ANFIS), Particle Swarm Optimization (PSO

Comparative Study of P&O and Fuzzy MPPT Controllers and Their Optimization Using PSO and GA to Improve Wind Energy System

Many academics have recently focused on wind energy installations. WECS (wind energy conversion system) is a renewable energy source that has seen significant development in recent years. Furthermore, compared to the use of power grid supply, the use of the WECS in the water pumping field is a cost-free option (economically). The purpose of this study is to demonstrate a wind-powered pumping mechanism. To obtain the best option, it considers and contrasts four distinct approaches. This research aims to improve the system\u27s performance and the quality of the generated power. The objective of the control of WECS with a permanent magnet synchronous generator (PMSG) is to carefully maximize power generation. Finally, this research employed the fuzzy logic control (FLC) and particle swarm optimization (PSO) algorithms improved using a genetic algorithm (GA). The proposed system\u27s performance was tested using the generated output voltage, current, and power waveforms, as well as the intermediate circuit voltage waveform and generator speed. The provided data show that the control technique used in this study was effective

Intelligent Control Schemes for Maximum Power Extraction from Photovoltaic Arrays under Faults

Investigation of power output from PV arrays under different fault conditions is an essential task to enhance performance of a photovoltaic system under all operating conditions. Significant reduction in power output can occur during various PV faults such as module disconnection, bypass diode failure, bridge fault, and short circuit fault under non-uniform shading conditions. These PV faults may cause several peaks in the characteristics curve of PV arrays, which can lead to failure of the MPPT control strategy. In fact, impact of a fault can differ depending on the type of PV array, and it can make the control of the system more complex. Therefore, consideration of suitable PV arrays with an effective control design is necessary for maximum power output from a PV system. For this purpose, the proposed study presents a comparative study of two intelligent control schemes, i.e., fuzzy logic (FL) and particle swarm optimization (PSO), with a conventional control scheme known as perturb and observe (P&O) for power extraction from a PV system. The comparative analysis is based on the performance of the control strategies under several faults and the types of PV modules, i.e., monocrystalline and thin-film PV arrays. In this study, numerical analysis for complex fault scenarios like multiple faults under partial shading have also been performed. Different from the previous literature, this study will reveal the performance of FL-, PSO-, and P&O-based MPPT strategies to track maximum peak power during multiple severe fault conditions while considering the accuracy and fast-tracking efficiencies of the control techniques. A thorough analysis along with in-depth quantitative data are presented, confirming the superiority of intelligent control techniques under multiple faults and different PV types

Battery Charge Control in Solar Photovoltaic Systems Based on Fuzzy Logic and Jellyfish Optimization Algorithm

The study focuses on the integration of a fuzzy logic-based Maximum Power Point Tracking (MPPT) system, an optimized proportional Integral-based voltage controller, and the Jellyfish Optimization Algorithm into a solar PV battery setup. This integrated approach aims to enhance energy harvesting efficiency under varying environmental conditions. The study’s innovation lies in effectively addressing challenges posed by diverse environmental factors and loads. The utilization of MATLAB 2022a Simulink for modeling and the Jellyfish Optimization Algorithm for PI-controller tuning further strengthens our findings. Testing scenarios, including constant and variable irradiation, underscore the significant enhancements achieved through the integration of fuzzy MPPT and the Jellyfish Optimization Algorithm with the PI-based voltage controller. These enhancements encompass improved power extraction, optimized voltage regulation, swift settling times, and overall efficiency gains.The authors were supported by the Vitoria-Gasteiz Mobility Lab Foundation, an organization of the government of the Provincial Council of Araba and the City Council of Vitoria-Gasteiz through the following project grant (“Generación de mapas mediante drones e Inteligencia Computacional”)

Investigation of performance of fuzzy logic controllers optimized with the hybrid genetic-gravitational search algorithm for PMSM speed control

Fuzzy logic controllers (FLCs) are widely used to control complex systems with model uncertainty, such as alternating current motors. The design process of the FLC is generally based on the designer’s adjustments on the controller until the desired performance is achieved. However, doing the controller design in this way makes the design process quite difficult and time-consuming, so it is often impossible to make a suitable and successful design. In this study, the output membership functions of the FLC are optimized with heuristic algorithms to reach the best speed control performance of the permanent magnet synchronous motor (PMSM). This paper proposes a new hybrid algorithm called H-GA-GSA, created by combining the advantages of the Genetic Algorithm (GA) and Gravitational Search Algorithm (GSA) to optimize FLC. The paper presents a convenient adjustment and design method for optimizing FLC with heuristic algorithms considered. To evaluate the effectiveness of H-GA-GSA, the proposed hybrid algorithm has been compared with GA and GSA in terms of convergence rate, PMSM speed control performance and electromagnetic torque variations. Optimization performance and results obtained from simulation studies verify that the proposed hybrid H-GA-GSA outperforms GA and GSA

Photovoltaic Emulation System and Maximum Power Point Tracking Algorithm Under Partial Shading Conditions

In this thesis, a novel photovoltaic (PV) emulator and the state-of-art learning–based real-time hybrid maximum power point tracking (MPPT) algorithms have been presented. Real-time research on PV systems is a challenging task because it requires a precise PV emulator that can faithfully reproduce the nonlinear properties of a PV array. The prime objective of the constructed emulator based on integration of unilluminated solar panels with external current sources is to overcome the constraints such as the need for wide surrounding space, high installation cost, and lack of control over the environmental conditions. In addition, the proposed PV emulator is able to simulate the electrical characteristics of the PV system under uniform irradiation as well as partially shading conditions (PSC). Moreover, the application of MPPT technology in PV systems under PSC conditions is challenging. Under complex environmental conditions, the power-voltage (P-V) characteristic curve of a PV system is likely to contain both local global maximum power points (LMPPs) and global maximum power points (GMPP). The MPPT algorithm applied to a PV system should have minimal steady-state oscillations to reduce power losses while accurately searching for the GMPP. The proposed MPPT algorithms resolved the drawbacks of the conventional MPPT method that have poor transient response, high continuous steady-state oscillation, and inefficient tracking performance of maximum power point voltage in the presence of partial shading. The intended algorithms have been verified using MATLAB/Simulink and the proposed PV emulator by applying comparative analysis with the traditional MPPT algorithms. In addition, the performance of the proposed MPPT algorithms and control scheme is validated experimentally with the implementation of MATLAB/Simulink/Stateflow on dSPACE Real-Time-Interface (RTI) 1007 processor board and DS2004 A/D and CP4002 Digital I/O boards. The results indicate that the algorithm is effective in reducing power losses and faster in tracking the speed of the maximum power point with less oscillation under partial shading conditions. In addition, excellent dynamic characteristics of the proposed emulator have been proven to be an ideal tool for testing PV inverters and various maximum power point tracking (MPPT) algorithms for commercial applications and university studies

GA-based multi-objective optimization of active nonlinear quarter car suspension system—PID and fuzzy logic control

Background The primary function of a suspension system is to isolate the vehicle body from road irregularities thus providing the ride comfort and to support the vehicle and provide stability. The suspension system has to perform conflicting requirements; hence, a passive suspension system is replaced by the active suspension system which can supply force to the system. Active suspension supplies energy to respond dynamically and achieve relative motion between body and wheel and thus improves the performance of suspension system. Methods This study presents modelling and control optimization of a nonlinear quarter car suspension system. A mathematical model of nonlinear quarter car is developed and simulated for control and optimization in Matlab/Simulink® environment. Class C road is selected as input road condition with the vehicle traveling at 80 kmph. Active control of the suspension system is achieved using FLC and PID control actions. Instead of guessing and or trial and error method, genetic algorithm (GA)-based optimization algorithm is implemented to tune PID parameters and FLC membership functions’ range and scaling factors. The optimization function is modeled as a multi-objective problem comprising of frequency weighted RMS seat acceleration, Vibration dose value (VDV), RMS suspension space, and RMS tyre deflection. ISO 2631-1 standard is adopted to assess the ride and health criterion. Results The nonlinear quarter model along with the controller is modeled and simulated and optimized in a Matlab/Simulink environment. It is observed that GA-optimized FLC gives better control as compared to PID and passive suspension system. Further simulations are validated on suspension system with seat and human model. Parameters under observation are frequency-weighted RMS head acceleration, VDV at the head, crest factor, and amplitude ratios at the head and upper torso (AR_h and AR_ut). Simulation results are presented in time and frequency domain. Conclusion Simulation results show that GA-based FLC and PID controller gives better ride comfort and health criterion by reducing RMS head acceleration, VDV at the head, CF, and AR_h and AR_ut over passive suspension system

Artificial Intelligence and Bio-Inspired Soft Computing-Based Maximum Power Plant Tracking for a Solar Photovoltaic System under Non-Uniform Solar Irradiance Shading Conditions - A Review

Substantial progress in solar photovoltaic (SPV) dissemination in grid-connected and standalone power generation systems has been witnessed during the last two decades. However, weather intermittency has a non-linear characteristic impact on solar photovoltaic output, which can cause considerable loss in the system's overall output. To overcome these inevitable losses and optimize the SPV output, maximum power point tracking (MPPT) is mounted in the middle of the power electronics converters and SPV to achieve the maximum output with better precision from the SPV system under intermittent weather conditions. As MPPT is considered an essential part of the SPV system, up to now, many researchers have developed numerous MPPT techniques, each with unique features. A Google Scholar survey from 2015 - 2021 was performed to scrutinize the number of published review papers in this area. An online search established that on different MPPT techniques, overall, 100 review articles were published; out of these 100, seven reviews on conventional MPPT techniques under shading or partial shading and only four under non-uniform solar irradiance are published. Unfortunately, no dedicated review article has explicitly focused on soft computing MPPT (SC-MPPT) techniques. Therefore, a comprehensive review of articles on SC-MPPT techniques is desirable, in which almost all the familiar SC-MPPT techniques have to be summarized in one piece. This review article concentrates explicitly on soft computing-based MPPT techniques under non-uniform irradiance conditions along with their operating principles, block/flow diagram. It will not only be helpful for academics and researchers to provide a future direction in SC-MPPT optimization research, but also help the field engineers to select the appropriate SC-MPPT for SPV according to system design and environmental conditions

A Review of Control Techniques for Wind Energy Conversion System

Wind energy is the most efficient and advanced form of renewable energy (RE) in recent decades, and an effective controller is required to regulate the power generated by wind energy. This study provides an overview of state-of-the-art control strategies for wind energy conversion systems (WECS). Studies on the pitch angle controller, the maximum power point tracking (MPPT) controller, the machine side controller (MSC), and the grid side controller (GSC) are reviewed and discussed. Related works are analyzed, including evolution, software used, input and output parameters, specifications, merits, and limitations of different control techniques. The analysis shows that better performance can be obtained by the adaptive and soft-computing based pitch angle controller and MPPT controller, the field-oriented control for MSC, and the voltage-oriented control for GSC. This study provides an appropriate benchmark for further wind energy research