Tactile on-chip pre-processing with techniques from artificial retinas

The interest in tactile sensors is increasing as their use in complex unstructured environments is demanded, like in tele-presence, minimal invasive surgery, robotics etc. The matrix of pressure data these devices provide can be managed with many image processing algorithms to extract the required information. However, as in the case of vision chips or artificial retinas, problems arise when the array size and the computation complexity increase. Having a look to the skin, the information collected by every mechanoreceptor is not carried to the brain for its processing, but some complex pre-processing is performed to fit the limited throughput of the nervous system. This is specially important for high bandwidth demanding tasks. Experimental works report that neural response of skin mechanoreceptors encodes the change in local shape from an offset level rather than the absolute force or pressure distributions. This is also the behavior of the retina, which implements a spatio-temporal averaging. We propose the same strategy in tactile preprocessing, and we show preliminary results when it faces the detection of the slip, which involves fast real-time processing.Ministerio de Ciencia y Tecnología TIC2003 - 09817-C0

Integrated Circuitry to Detect Slippage Inspired by Human Skin and Artificial Retinas

This paper presents a bioinspired integrated tactile coprocessor that is able to generate a warning in the case of slippage via the data provided by a tactile sensor. Some implementations use different layers of piezoresistive and piezoelectric materials to build upon the raw sensor and obtain the static (pressure) as well as the dynamic (slippage) information. In this paper, a simple raw sensor is used, and a circuitry is implemented, which is able to extract the dynamic information from a single piezoresistive layer. The circuitry was inspired by structures found in human skin and retina, as they are biological systems made up of a dense network of receptors. It is largely based on an artificial retina , which is able to detect motion by using relatively simple spatial temporal dynamics. The circuitry was adapted to respond in the bandwidth of microvibrations produced by early slippage, resembling human skin. Experimental measurements from a chip implemented in a 0.35-mum four-metal two-poly standard CMOS process are presented to show both the performance of the building blocks included in each processing node and the operation of the whole system as a detector of early slippage.Ministerio de Economía y Competitividad TEC2006-12376-C02-01Gobierno de España TEC2006- 1572

Tactile retina for slip detection

The interest in tactile sensors is increasing as their use in complex unstructured environments is demanded, like in telepresence, minimal invasive surgery, robotics etc. The array of pressure data provided by these devices can be treated with different image processing algorithms to extract the required information. However, as in the case of vision chips or artificial retinas, problems arise when the array size and the computation complexity increase. Having a look at the skin, the information collected by every mechanoreceptor is not sent to the brain for its processing, but some complex pre-processing is performed to fit the limited throughput of the nervous system. This is specially important for high bandwidth demanding tasks. Experimental works report that neural response of skin mechanoreceptors encodes the change in local shape from an offset level rather than the absolute force or pressure distributions. Something similar happens in the retina, which implements a spatio-temporal averaging. We propose the same strategy in tactile preprocessing, and we show preliminary results illustrated for the case of slip detection, which is certainly demanding in computing requirements.Ministerio de Ciencia y Tecnología TIC2003- 09817-C0

Incipient Slip-Based Rotation Measurement via Visuotactile Sensing During In-Hand Object Pivoting

In typical in-hand manipulation tasks represented by object pivoting, the real-time perception of rotational slippage has been proven beneficial for improving the dexterity and stability of robotic hands. An effective strategy is to obtain the contact properties for measuring rotation angle through visuotactile sensing. However, existing methods for rotation estimation did not consider the impact of the incipient slip during the pivoting process, which introduces measurement errors and makes it hard to determine the boundary between stable contact and macro slip. This paper describes a generalized 2-d contact model under pivoting, and proposes a rotation measurement method based on the line-features in the stick region. The proposed method was applied to the Tac3D vision-based tactile sensors using continuous marker patterns. Experiments show that the rotation measurement system could achieve an average static measurement error of 0.17 degree and an average dynamic measurement error of 1.34 degree. Besides, the proposed method requires no training data and can achieve real-time sensing during the in-hand object pivoting.Comment: 7 pages, 9 figures, submitted to ICRA 202

Neuromorphic event-based slip detection and suppression in robotic grasping and manipulation

Slip detection is essential for robots to make robust grasping and fine manipulation. In this paper, a novel dynamic vision-based finger system for slip detection and suppression is proposed. We also present a baseline and feature based approach to detect object slips under illumination and vibration uncertainty. A threshold method is devised to autonomously sample noise in real-time to improve slip detection. Moreover, a fuzzy based suppression strategy using incipient slip feedback is proposed for regulating the grip force. A comprehensive experimental study of our proposed approaches under uncertainty and system for high-performance precision manipulation are presented. We also propose a slip metric to evaluate such performance quantitatively. Results indicate that the system can effectively detect incipient slip events at a sampling rate of 2kHz ($\Delta t = 500\mu s$) and suppress them before a gross slip occurs. The event-based approach holds promises to high precision manipulation task requirement in industrial manufacturing and household services.Comment: 18 pages, 14 figure

Dynamic-vision-based force measurements using convolutional recurrent neural networks

In this paper, a novel dynamic Vision-Based Measurement method is proposed to measure contact force independent of the object sizes. A neuromorphic camera (Dynamic Vision Sensor) is utilizused to observe intensity changes within the silicone membrane where the object is in contact. Three deep Long Short-Term Memory neural networks combined with convolutional layers are developed and implemented to estimate the contact force from intensity changes over time. Thirty-five experiments are conducted using three objects with different sizes to validate the proposed approach. We demonstrate that the networks with memory gates are robust against variable contact sizes as the networks learn object sizes in the early stage of a grasp. Moreover, spatial and temporal features enable the sensor to estimate the contact force every 10 ms accurately. The results are promising with Mean Squared Error of less than 0.1 N for grasping and holding contact force using leave-one-out cross-validation method

Methods and Sensors for Slip Detection in Robotics: A Survey

The perception of slip is one of the distinctive abilities of human tactile sensing. The sense of touch allows recognizing a wide set of properties of a grasped object, such as shape, weight and dimension. Based on such properties, the applied force can be accordingly regulated avoiding slip of the grasped object. Despite the great importance of tactile sensing for humans, mechatronic hands (robotic manipulators, prosthetic hands etc.) are rarely endowed with tactile feedback. The necessity to grasp objects relying on robust slip prevention algorithms is not yet corresponded in existing artificial manipulators, which are relegated to structured environments then. Numerous approaches regarding the problem of slip detection and correction have been developed especially in the last decade, resorting to a number of sensor typologies. However, no impact on the industrial market has been achieved. This paper reviews the sensors and methods so far proposed for slip prevention in artificial tactile perception, starting from more classical techniques until the latest solutions tested on robotic systems. The strengths and weaknesses of each described technique are discussed, also in relation to the sensing technologies employed. The result is a summary exploring the whole state of art and providing a perspective towards the future research directions in the sector