19 research outputs found
Advanced Signal Processing and Control in Anaesthesia
This thesis comprises three major stages: classification of depth of anaesthesia (DOA); modelling a typical patient’s behaviour during a surgical procedure; and control of DOAwith simultaneous administration of propofol and remifentanil. Clinical data gathered in theoperating theatre was used in this project.
Multiresolution wavelet analysis was used to extract meaningful features from the auditory evoked potentials (AEP). These features were classified into different DOA levels using a fuzzy relational classifier (FRC). The FRC uses fuzzy clustering and fuzzy relational composition. The FRC had a good performance and was able to distinguish between the DOA levels.
A hybrid patient model was developed for the induction and maintenance phase of anaesthesia. An adaptive network-based fuzzy inference system was used to adapt Takagi-Sugeno-Kang (TSK) fuzzy models relating systolic arterial pressure (SAP), heart rate (HR), and the wavelet extracted AEP features with the effect concentrations of propofol and remifentanil. The effect of surgical stimuli on SAP and HR, and the analgesic properties of remifentanil were described by Mamdani fuzzy models, constructed with anaesthetist cooperation. The model proved to be adequate, reflecting the effect of drugs and surgical stimuli.
A multivariable fuzzy controller was developed for the simultaneous administration of propofol and remifentanil. The controller is based on linguistic rules that interact with three decision tables, one of which represents a fuzzy PI controller. The infusion rates of the two drugs are determined according to the DOA level and surgical stimulus. Remifentanil is titrated according to the required analgesia level and its synergistic interaction with propofol. The controller was able to adequately achieve and maintain the target DOA level, under different conditions.
Overall, it was possible to model the interaction between propofol and remifentanil, and to successfully use this model to develop a closed-loop system in anaesthesia
Computational Intelligence in Electromyography Analysis
Electromyography (EMG) is a technique for evaluating and recording the electrical activity produced by skeletal muscles. EMG may be used clinically for the diagnosis of neuromuscular problems and for assessing biomechanical and motor control deficits and other functional disorders. Furthermore, it can be used as a control signal for interfacing with orthotic and/or prosthetic devices or other rehabilitation assists. This book presents an updated overview of signal processing applications and recent developments in EMG from a number of diverse aspects and various applications in clinical and experimental research. It will provide readers with a detailed introduction to EMG signal processing techniques and applications, while presenting several new results and explanation of existing algorithms. This book is organized into 18 chapters, covering the current theoretical and practical approaches of EMG research
On the Recognition of Emotion from Physiological Data
This work encompasses several objectives, but is primarily concerned with an experiment where 33 participants were shown 32 slides in order to create ‗weakly induced emotions‘. Recordings of the participants‘ physiological state were taken as well as a self report of their emotional state. We then used an assortment of classifiers to predict emotional state from the recorded physiological signals, a process known as Physiological Pattern Recognition (PPR). We investigated techniques for recording, processing and extracting features from six different physiological signals: Electrocardiogram (ECG), Blood Volume Pulse (BVP), Galvanic Skin Response (GSR), Electromyography (EMG), for the corrugator muscle, skin temperature for the finger and respiratory rate. Improvements to the state of PPR emotion detection were made by allowing for 9 different weakly induced emotional states to be detected at nearly 65% accuracy. This is an improvement in the number of states readily detectable. The work presents many investigations into numerical feature extraction from physiological signals and has a chapter dedicated to collating and trialing facial electromyography techniques. There is also a hardware device we created to collect participant self reported emotional states which showed several improvements to experimental procedure
Humanoid Robots
For many years, the human being has been trying, in all ways, to recreate the complex mechanisms that form the human body. Such task is extremely complicated and the results are not totally satisfactory. However, with increasing technological advances based on theoretical and experimental researches, man gets, in a way, to copy or to imitate some systems of the human body. These researches not only intended to create humanoid robots, great part of them constituting autonomous systems, but also, in some way, to offer a higher knowledge of the systems that form the human body, objectifying possible applications in the technology of rehabilitation of human beings, gathering in a whole studies related not only to Robotics, but also to Biomechanics, Biomimmetics, Cybernetics, among other areas. This book presents a series of researches inspired by this ideal, carried through by various researchers worldwide, looking for to analyze and to discuss diverse subjects related to humanoid robots. The presented contributions explore aspects about robotic hands, learning, language, vision and locomotion
Design of an intelligent embedded system for condition monitoring of an industrial robot
PhD ThesisIndustrial robots have long been used in production systems in order to improve
productivity, quality and safety in automated manufacturing processes. There are
significant implications for operator safety in the event of a robot malfunction or failure,
and an unforeseen robot stoppage, due to different reasons, has the potential to cause an
interruption in the entire production line, resulting in economic and production losses.
Condition monitoring (CM) is a type of maintenance inspection technique by which an
operational asset is monitored and the data obtained is analysed to detect signs of
degradation, diagnose the causes of faults and thus reduce maintenance costs. So, the main
focus of this research is to design and develop an online, intelligent CM system based on
wireless embedded technology to detect and diagnose the most common faults in the
transmission systems (gears and bearings) of the industrial robot joints using vibration
signal analysis.
To this end an old, but operational, PUMA 560 robot was utilized to synthesize a number
of different transmission faults in one of the joints (3 - elbow), such as backlash between
the gear pair, gear tooth and bearing faults. A two-stage condition monitoring algorithm is
proposed for robot health assessment, incorporating fault detection and fault diagnosis.
Signal processing techniques play a significant role in building any condition monitoring
system, in order to determine fault-symptom relationships, and detect abnormalities in
robot health. Fault detection stage is based on time-domain signal analysis and a statistical
control chart (SCC) technique. For accurate fault diagnosis in the second stage, a novel
implementation of a time-frequency signal analysis technique based on the discrete wavelet
transform (DWT) is adopted. In this technique, vibration signals are decomposed into eight
levels of wavelet coefficients and statistical features, such as standard deviation, kurtosis
and skewness, are obtained at each level and analysed to extract the most salient feature
related to faults; the artificial neural network (ANN) is then used for fault classification. A
data acquisition system based on National Instruments (NI) software and hardware was
initially developed for preliminary robot vibration analysis and feature extraction. The
transmission faults induced in the robot can change the captured vibration spectra, and the
robot’s natural frequencies were established using experimental modal analysis, and also
the fundamental fault frequencies for the gear transmission and bearings were obtained and
utilized for preliminary robot condition monitoring.
In addition to simulation of different levels of backlash fault, gear tooth and bearing faults
which have not been previously investigated in industrial robots, with several levels of
ii
severity, were successfully simulated and detected in the robot’s joint transmission. The
vibration features extracted, which are related to the robot healthy state and different fault
types, using the data acquisition system were subsequently used in building the SCC and
ANN, which were trained using part of the measured data set that represents the robot
operating range. Another set of data, not used within the training stage, was then utilized
for validation. The results indicate the successful detection and diagnosis of faults using the
key extracted parameters. A wireless embedded system based on the ZigBee
communication protocol was designed for the application of the proposed CM algorithm in
real-time, using an Arduino DUE as the core of the wireless sensor unit attached on the
robot arm. A Texas Instruments digital signal processor (TMS320C6713 DSK board) was
used as the base station of the wireless system on which the robot’s fault diagnosis
algorithm is run. To implement the two stages of the proposed CM algorithm on the
designed embedded system, software based on the C programming language has been
developed. To demonstrate the reliability of the designed wireless CM system,
experimental validations were performed, and high reliability was shown in the detection
and diagnosis of several seeded faults in the robot.
Optimistically, the established wireless embedded system could be envisaged for fault
detection and diagnostics on any type of rotating machine, with the monitoring system
realized using vibration signal analysis. Furthermore, with some modifications to the
system’s hardware and software, different CM techniques such as acoustic emission (AE)
analysis or motor current signature analysis (MCSA), can be applied.Iraqi government, represented by the Ministry of Higher Education and
Scientific Research, the Iraqi Cultural Attaché in London, and the University of
Technology in Baghda
Wearable Movement Sensors for Rehabilitation: From Technology to Clinical Practice
This Special Issue shows a range of potential opportunities for the application of wearable movement sensors in motor rehabilitation. However, the papers surely do not cover the whole field of physical behavior monitoring in motor rehabilitation. Most studies in this Special Issue focused on the technical validation of wearable sensors and the development of algorithms. Clinical validation studies, studies applying wearable sensors for the monitoring of physical behavior in daily life conditions, and papers about the implementation of wearable sensors in motor rehabilitation are under-represented in this Special Issue. Studies investigating the usability and feasibility of wearable movement sensors in clinical populations were lacking. We encourage researchers to investigate the usability, acceptance, feasibility, reliability, and clinical validity of wearable sensors in clinical populations to facilitate the application of wearable movement sensors in motor rehabilitation