On the use of autonomous unmanned vehicles in response to hazardous atmospheric release incidents

Recent events have induced a surge of interest in the methods of response to releases of hazardous materials or gases into the atmosphere. In the last decade there has been particular interest in mapping and quantifying emissions for regulatory purposes, emergency response, and environmental monitoring. Examples include: responding to events such as gas leaks, nuclear accidents or chemical, biological or radiological (CBR) accidents or attacks, and even exploring sources of methane emissions on the planet Mars. This thesis presents a review of the potential responses to hazardous releases, which includes source localisation, boundary tracking, mapping and source term estimation. [Continues.]</div

A cell outage management framework for dense heterogeneous networks

In this paper, we present a novel cell outage management (COM) framework for heterogeneous networks with split control and data planes-a candidate architecture for meeting future capacity, quality-of-service, and energy efficiency demands. In such an architecture, the control and data functionalities are not necessarily handled by the same node. The control base stations (BSs) manage the transmission of control information and user equipment (UE) mobility, whereas the data BSs handle UE data. An implication of this split architecture is that an outage to a BS in one plane has to be compensated by other BSs in the same plane. Our COM framework addresses this challenge by incorporating two distinct cell outage detection (COD) algorithms to cope with the idiosyncrasies of both data and control planes. The COD algorithm for control cells leverages the relatively larger number of UEs in the control cell to gather large-scale minimization-of-drive-test report data and detects an outage by applying machine learning and anomaly detection techniques. To improve outage detection accuracy, we also investigate and compare the performance of two anomaly-detecting algorithms, i.e., k-nearest-neighbor- and local-outlier-factor-based anomaly detectors, within the control COD. On the other hand, for data cell COD, we propose a heuristic Grey-prediction-based approach, which can work with the small number of UE in the data cell, by exploiting the fact that the control BS manages UE-data BS connectivity and by receiving a periodic update of the received signal reference power statistic between the UEs and data BSs in its coverage. The detection accuracy of the heuristic data COD algorithm is further improved by exploiting the Fourier series of the residual error that is inherent to a Grey prediction model. Our COM framework integrates these two COD algorithms with a cell outage compensation (COC) algorithm that can be applied to both planes. Our COC solution utilizes an actor-critic-based reinforcement learning algorithm, which optimizes the capacity and coverage of the identified outage zone in a plane, by adjusting the antenna gain and transmission power of the surrounding BSs in that plane. The simulation results show that the proposed framework can detect both data and control cell outage and compensate for the detected outage in a reliable manner

Identifying Infection Sources and Regions in Large Networks

Identifying the infection sources in a network, including the index cases that introduce a contagious disease into a population network, the servers that inject a computer virus into a computer network, or the individuals who started a rumor in a social network, plays a critical role in limiting the damage caused by the infection through timely quarantine of the sources. We consider the problem of estimating the infection sources and the infection regions (subsets of nodes infected by each source) in a network, based only on knowledge of which nodes are infected and their connections, and when the number of sources is unknown a priori. We derive estimators for the infection sources and their infection regions based on approximations of the infection sequences count. We prove that if there are at most two infection sources in a geometric tree, our estimator identifies the true source or sources with probability going to one as the number of infected nodes increases. When there are more than two infection sources, and when the maximum possible number of infection sources is known, we propose an algorithm with quadratic complexity to estimate the actual number and identities of the infection sources. Simulations on various kinds of networks, including tree networks, small-world networks and real world power grid networks, and tests on two real data sets are provided to verify the performance of our estimators

Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays

Massive MIMO (multiple-input multiple-output) is no longer a "wild" or "promising" concept for future cellular networks - in 2018 it became a reality. Base stations (BSs) with 64 fully digital transceiver chains were commercially deployed in several countries, the key ingredients of Massive MIMO have made it into the 5G standard, the signal processing methods required to achieve unprecedented spectral efficiency have been developed, and the limitation due to pilot contamination has been resolved. Even the development of fully digital Massive MIMO arrays for mmWave frequencies - once viewed prohibitively complicated and costly - is well underway. In a few years, Massive MIMO with fully digital transceivers will be a mainstream feature at both sub-6 GHz and mmWave frequencies. In this paper, we explain how the first chapter of the Massive MIMO research saga has come to an end, while the story has just begun. The coming wide-scale deployment of BSs with massive antenna arrays opens the door to a brand new world where spatial processing capabilities are omnipresent. In addition to mobile broadband services, the antennas can be used for other communication applications, such as low-power machine-type or ultra-reliable communications, as well as non-communication applications such as radar, sensing and positioning. We outline five new Massive MIMO related research directions: Extremely large aperture arrays, Holographic Massive MIMO, Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin

Robust navigation for industrial service robots

Pla de Doctorats Industrials de la Generalitat de CatalunyaRobust, reliable and safe navigation is one of the fundamental problems of robotics. Throughout the present thesis, we tackle the problem of navigation for robotic industrial mobile-bases. We identify its components and analyze their respective challenges in order to address them. The research work presented here ultimately aims at improving the overall quality of the navigation stack of a commercially available industrial mobile-base. To introduce and survey the overall problem we first break down the navigation framework into clearly identified smaller problems. We examine the Simultaneous Localization and Mapping (SLAM) problem, recalling its mathematical grounding and exploring the state of the art. We then review the problem of planning the trajectory of a mobile-base toward a desired goal in the generated environment representation. Finally we investigate and clarify the use of the subset of the Lie theory that is useful in robotics. The first problem tackled is the recognition of place for closing loops in SLAM. Loop closure refers to the ability of a robot to recognize a previously visited location and infer geometrical information between its current and past locations. Using only a 2D laser range finder sensor, we address the problem using a technique borrowed from the field of Natural Language Processing (NLP) which has been successfully applied to image-based place recognition, namely the Bag-of-Words. We further improve the method with two proposals inspired from NLP. Firstly, the comparison of places is strengthened by considering the natural relative order of features in each individual sensor reading. Secondly, topological correspondences between places in a corpus of visited places are established in order to promote together instances that are ‘close’ to one another. We then tackle the problem of motion model calibration for odometry estimation. Given a mobile-base embedding an exteroceptive sensor able to observe ego-motion, we propose a novel formulation for estimating the intrinsic parameters of an odometry motion model. Resorting to an adaptation of the pre-integration theory initially developed for inertial motion sensors, we employ iterative nonlinear on-manifold optimization to estimate the wheel radii and wheel separation. The method is further extended to jointly estimate both the intrinsic parameters of the odometry model together with the extrinsic parameters of the embedded sensor. The method is shown to accommodate to variation in model parameters quickly when the vehicle is subject to physical changes during operation. Following the generation of a map in which the robot is localized, we address the problem of estimating trajectories for motion planning. We devise a new method for estimating a sequence of robot poses forming a smooth trajectory. Regardless of the Lie group considered, the trajectory is seen as a collection of states lying on a spline with non-vanishing n-th derivatives at each point. Formulated as a multi-objective nonlinear optimization problem, it allows for the addition of cost functions such as velocity and acceleration limits, collision avoidance and more. The proposed method is evaluated for two different motion planning tasks, the planning of trajectories for a mobile-base evolving in the SE(2) manifold, and the planning of the motion of a multi-link robotic arm whose end-effector evolves in the SE(3) manifold. From our study of Lie theory, we developed a new, ready to use, programming library called `manif’. The library is open source, publicly available and is developed following good software programming practices. It is designed so that it is easy to integrate and manipulate, and allows for flexible use while facilitating the possibility to extend it beyond the already implemented Lie groups.La navegación autónoma es uno de los problemas fundamentales de la robótica, y sus diferentes desafíos se han estudiado durante décadas. El desarrollo de métodos de navegación robusta, confiable y segura es un factor clave para la creación de funcionalidades de nivel superior en robots diseñados para operar en entornos con humanos. A lo largo de la presente tesis, abordamos el problema de navegación para bases robóticas móviles industriales; identificamos los elementos de un sistema de navegación; y analizamos y tratamos sus desafíos. El trabajo de investigación presentado aquí tiene como último objetivo mejorar la calidad general del sistema completo de navegación de una base móvil industrial disponible comercialmente. Para estudiar el problema de navegación, primero lo desglosamos en problemas menores claramente identificados. Examinamos el subproblema de mapeo del entorno y localización del robot simultáneamente (SLAM por sus siglas en ingles) y estudiamos el estado del arte del mismo. Al hacerlo, recordamos y detallamos la base matemática del problema de SLAM. Luego revisamos el subproblema de planificación de trayectorias hacia una meta deseada en la representación del entorno generada. Además, como una herramienta para las soluciones que se presentarán más adelante en el desarrollo de la tesis, investigamos y aclaramos el uso de teoría de Lie, centrándonos en el subconjunto de la teoría que es útil para la estimación de estados en robótica. Como primer elemento identificado para mejoras, abordamos el problema de reconocimiento de lugares para cerrar lazos en SLAM. El cierre de lazos se refiere a la capacidad de un robot para reconocer una ubicación visitada previamente e inferí información geométrica entre la ubicación actual del robot y aquellas reconocidas. Usando solo un sensor láser 2D, la tarea es desafiante ya que la percepción del entorno que proporciona el sensor es escasa y limitada. Abordamos el problema utilizando 'bolsas de palabras', una técnica prestada del campo de procesamiento del lenguaje natural (NLP) que se ha aplicado con éxito anteriormente al reconocimiento de lugares basado en imágenes. Nuestro método incluye dos nuevas propuestas inspiradas también en NLP. Primero, la comparación entre lugares candidatos se fortalece teniendo en cuenta el orden relativo natural de las características en cada lectura individual del sensor; y segundo, se establece un corpus de lugares visitados para promover juntos instancias que están "cerca" la una de la otra desde un punto de vista topológico. Evaluamos nuestras propuestas por separado y conjuntamente en varios conjuntos de datos, con y sin ruido, demostrando mejora en la detección de cierres de lazo para sensores láser 2D, con respecto al estado del arte. Luego abordamos el problema de la calibración del modelo de movimiento para la estimación de la edometría. Dado que nuestra base móvil incluye un sensor exteroceptivo capaz de observar el movimiento de la plataforma, proponemos una nueva formulación que permite estimar los parámetros intrínsecos del modelo cinemático de la plataforma durante el cómputo de la edometría del vehículo. Hemos recurrido a una adaptación de la teoría de reintegración inicialmente desarrollado para unidades inerciales de medida, y aplicado la técnica a nuestro modelo cinemático. El método nos permite, mediante optimización iterativa no lineal, la estimación del valor del radio de las ruedas de forma independiente y de la separación entre las mismas. El método se amplía posteriormente par idéntica de forma simultánea, estos parámetros intrínsecos junto con los parámetros extrínsecos que ubican el sensor láser con respecto al sistema de referencia de la base móvil. El método se valida en simulación y en un entorno real y se muestra que converge hacia los verdaderos valores de los parámetros. El método permite la adaptación de los parámetros intrínsecos del modelo cinemático de la plataforma derivados de cambios físicos durante la operación, tales como el impacto que el cambio de carga sobre la plataforma tiene sobre el diámetro de las ruedas. Como tercer subproblema de navegación, abordamos el reto de planificar trayectorias de movimiento de forma suave. Desarrollamos un método para planificar la trayectoria como una secuencia de configuraciones sobre una spline con n-ésimas derivadas en todos los puntos, independientemente del grupo de Lie considerado. Al ser formulado como un problema de optimización no lineal con múltiples objetivos, es posible agregar funciones de coste al problema de optimización que permitan añadir límites de velocidad o aceleración, evasión de colisiones, etc. El método propuesto es evaluado en dos tareas de planificación de movimiento diferentes, la planificación de trayectorias para una base móvil que evoluciona en la variedad SE(2), y la planificación del movimiento de un brazo robótico cuyo efector final evoluciona en la variedad SE(3). Además, cada tarea se evalúa en escenarios con complejidad de forma incremental, y se muestra un rendimiento comparable o mejor que el estado del arte mientras produce resultados más consistentes. Desde nuestro estudio de la teoría de Lie, desarrollamos una nueva biblioteca de programación llamada “manif”. La biblioteca es de código abierto, está disponible públicamente y se desarrolla siguiendo las buenas prácticas de programación de software. Esta diseñado para que sea fácil de integrar y manipular, y permite flexibilidad de uso mientras se facilita la posibilidad de extenderla más allá de los grupos de Lie inicialmente implementados. Además, la biblioteca se muestra eficiente en comparación con otras soluciones existentes. Por fin, llegamos a la conclusión del estudio de doctorado. Examinamos el trabajo de investigación y trazamos líneas para futuras investigaciones. También echamos un vistazo en los últimos años y compartimos una visión personal y experiencia del desarrollo de un doctorado industrial.Postprint (published version