Intelligent Side Information Generation in Distributed Video Coding

Distributed video coding (DVC) reverses the traditional coding paradigm of complex encoders allied with basic decoding to one where the computational cost is largely incurred by the decoder. This is attractive as the proven theoretical work of Wyner-Ziv (WZ) and Slepian-Wolf (SW) shows that the performance by such a system should be exactly the same as a conventional coder. Despite the solid theoretical foundations, current DVC qualitative and quantitative performance falls short of existing conventional coders and there remain crucial limitations. A key constraint governing DVC performance is the quality of side information (SI), a coarse representation of original video frames which are not available at the decoder. Techniques to generate SI have usually been based on linear motion compensated temporal interpolation (LMCTI), though these do not always produce satisfactory SI quality, especially in sequences exhibiting non-linear motion. This thesis presents an intelligent higher order piecewise trajectory temporal interpolation (HOPTTI) framework for SI generation with original contributions that afford better SI quality in comparison to existing LMCTI-based approaches. The major elements in this framework are: (i) a cubic trajectory interpolation algorithm model that significantly improves the accuracy of motion vector estimations; (ii) an adaptive overlapped block motion compensation (AOBMC) model which reduces both blocking and overlapping artefacts in the SI emanating from the block matching algorithm; (iii) the development of an empirical mode switching algorithm; and (iv) an intelligent switching mechanism to construct SI by automatically selecting the best macroblock from the intermediate SI generated by HOPTTI and AOBMC algorithms. Rigorous analysis and evaluation confirms that significant quantitative and perceptual improvements in SI quality are achieved with the new framework

Constructing a reference standard for sports science and clinical movement sets using IMU-based motion capture technology

Motion analysis has improved greatly over the years through the development of low-cost inertia sensors. Such sensors have shown promising accuracy for both sport and medical applications, facilitating the possibility of a new reference standard to be constructed. Current gold standards within motion capture, such as high-speed camera-based systems and image processing, are not suitable for many movement-sets within both sports science and clinical movement analysis due to restrictions introduced by the movement sets. These restrictions include cost, portability, local environment constraints (such as light level) and poor line of sight accessibility. This thesis focusses on developing a magnetometer-less IMU-based motion capturing system to detect and classify two challenging movement sets: Basic stances during a Shaolin Kung Fu dynamic form, and severity levels from the modified UPDRS (Unified Parkinson’s Disease Rating Scale) analysis tapping exercise. This project has contributed three datasets. The Shaolin Kung Fu dataset is comprised of 5 dynamic movements repeated over 350 times by 8 experienced practitioners. The dataset was labelled by a professional Shaolin Kung Fu master. Two modified UPDRS datasets were constructed, one for each of the two locations measured. The modified UPDRS datasets comprised of 5 severity levels each with 100 self-emulated movement samples. The modified UPDRS dataset was labelled by a researcher in neuropsychological assessment. The errors associated with IMU systems has been reduced significantly through a combination of a Complementary filter and applying the constraints imposed by the range of movements available in human joints. Novel features have been extracted from each dataset. A piecewise feature set based on a moving window approach has been applied to the Shaolin Kung Fu dataset. While a combination of standard statistical features and a Durbin Watson analysis has been extracted from the modified UPDRS measurements. The project has also contributed a comparison of 24 models has been done on all 3 datasets and the optimal model for each dataset has been determined. The resulting models were commensurate with current gold standards. The Shaolin Kung Fu dataset was classified with the computational costly fine decision tree algorithm using 400 splits, resulting in: an accuracy of 98.9%, a precision of 96.9%, a recall value of 99.1%, and a F1-score of 98.0%. A novel approach of using sequential forward feature analysis was used to determine the minimum number of IMU devices required as well as the optimal number of IMU devices. The modified UPDRS datasets were then classified using a support vector machine algorithm requiring various kernels to achieve their highest accuracies. The measurements were repeated with a sensor located on the wrist and finger, with the wrist requiring a linear kernel and the finger a quadratic kernel. Both locations achieved an accuracy, precision, recall, and F1-score of 99.2%. Additionally, the project contributed an evaluation to the effect sensor location has on the proposed models. It was concluded that the IMU-based system has the potential to construct a reference standard both in sports science and clinical movement analysis. Data protection security and communication speeds were limitations in the system constructed due to the measured data being transferred from the devices via Bluetooth Low Energy communication. These limitations were considered and evaluated in the future works of this project

Automatic video segmentation employing object/camera modeling techniques

Practically established video compression and storage techniques still process video sequences as rectangular images without further semantic structure. However, humans watching a video sequence immediately recognize acting objects as semantic units. This semantic object separation is currently not reflected in the technical system, making it difficult to manipulate the video at the object level. The realization of object-based manipulation will introduce many new possibilities for working with videos like composing new scenes from pre-existing video objects or enabling user-interaction with the scene. Moreover, object-based video compression, as defined in the MPEG-4 standard, can provide high compression ratios because the foreground objects can be sent independently from the background. In the case that the scene background is static, the background views can even be combined into a large panoramic sprite image, from which the current camera view is extracted. This results in a higher compression ratio since the sprite image for each scene only has to be sent once. A prerequisite for employing object-based video processing is automatic (or at least user-assisted semi-automatic) segmentation of the input video into semantic units, the video objects. This segmentation is a difficult problem because the computer does not have the vast amount of pre-knowledge that humans subconsciously use for object detection. Thus, even the simple definition of the desired output of a segmentation system is difficult. The subject of this thesis is to provide algorithms for segmentation that are applicable to common video material and that are computationally efficient. The thesis is conceptually separated into three parts. In Part I, an automatic segmentation system for general video content is described in detail. Part II introduces object models as a tool to incorporate userdefined knowledge about the objects to be extracted into the segmentation process. Part III concentrates on the modeling of camera motion in order to relate the observed camera motion to real-world camera parameters. The segmentation system that is described in Part I is based on a background-subtraction technique. The pure background image that is required for this technique is synthesized from the input video itself. Sequences that contain rotational camera motion can also be processed since the camera motion is estimated and the input images are aligned into a panoramic scene-background. This approach is fully compatible to the MPEG-4 video-encoding framework, such that the segmentation system can be easily combined with an object-based MPEG-4 video codec. After an introduction to the theory of projective geometry in Chapter 2, which is required for the derivation of camera-motion models, the estimation of camera motion is discussed in Chapters 3 and 4. It is important that the camera-motion estimation is not influenced by foreground object motion. At the same time, the estimation should provide accurate motion parameters such that all input frames can be combined seamlessly into a background image. The core motion estimation is based on a feature-based approach where the motion parameters are determined with a robust-estimation algorithm (RANSAC) in order to distinguish the camera motion from simultaneously visible object motion. Our experiments showed that the robustness of the original RANSAC algorithm in practice does not reach the theoretically predicted performance. An analysis of the problem has revealed that this is caused by numerical instabilities that can be significantly reduced by a modification that we describe in Chapter 4. The synthetization of static-background images is discussed in Chapter 5. In particular, we present a new algorithm for the removal of the foreground objects from the background image such that a pure scene background remains. The proposed algorithm is optimized to synthesize the background even for difficult scenes in which the background is only visible for short periods of time. The problem is solved by clustering the image content for each region over time, such that each cluster comprises static content. Furthermore, it is exploited that the times, in which foreground objects appear in an image region, are similar to the corresponding times of neighboring image areas. The reconstructed background could be used directly as the sprite image in an MPEG-4 video coder. However, we have discovered that the counterintuitive approach of splitting the background into several independent parts can reduce the overall amount of data. In the case of general camera motion, the construction of a single sprite image is even impossible. In Chapter 6, a multi-sprite partitioning algorithm is presented, which separates the video sequence into a number of segments, for which independent sprites are synthesized. The partitioning is computed in such a way that the total area of the resulting sprites is minimized, while simultaneously satisfying additional constraints. These include a limited sprite-buffer size at the decoder, and the restriction that the image resolution in the sprite should never fall below the input-image resolution. The described multisprite approach is fully compatible to the MPEG-4 standard, but provides three advantages. First, any arbitrary rotational camera motion can be processed. Second, the coding-cost for transmitting the sprite images is lower, and finally, the quality of the decoded sprite images is better than in previously proposed sprite-generation algorithms. Segmentation masks for the foreground objects are computed with a change-detection algorithm that compares the pure background image with the input images. A special effect that occurs in the change detection is the problem of image misregistration. Since the change detection compares co-located image pixels in the camera-motion compensated images, a small error in the motion estimation can introduce segmentation errors because non-corresponding pixels are compared. We approach this problem in Chapter 7 by integrating risk-maps into the segmentation algorithm that identify pixels for which misregistration would probably result in errors. For these image areas, the change-detection algorithm is modified to disregard the difference values for the pixels marked in the risk-map. This modification significantly reduces the number of false object detections in fine-textured image areas. The algorithmic building-blocks described above can be combined into a segmentation system in various ways, depending on whether camera motion has to be considered or whether real-time execution is required. These different systems and example applications are discussed in Chapter 8. Part II of the thesis extends the described segmentation system to consider object models in the analysis. Object models allow the user to specify which objects should be extracted from the video. In Chapters 9 and 10, a graph-based object model is presented in which the features of the main object regions are summarized in the graph nodes, and the spatial relations between these regions are expressed with the graph edges. The segmentation algorithm is extended by an object-detection algorithm that searches the input image for the user-defined object model. We provide two objectdetection algorithms. The first one is specific for cartoon sequences and uses an efficient sub-graph matching algorithm, whereas the second processes natural video sequences. With the object-model extension, the segmentation system can be controlled to extract individual objects, even if the input sequence comprises many objects. Chapter 11 proposes an alternative approach to incorporate object models into a segmentation algorithm. The chapter describes a semi-automatic segmentation algorithm, in which the user coarsely marks the object and the computer refines this to the exact object boundary. Afterwards, the object is tracked automatically through the sequence. In this algorithm, the object model is defined as the texture along the object contour. This texture is extracted in the first frame and then used during the object tracking to localize the original object. The core of the algorithm uses a graph representation of the image and a newly developed algorithm for computing shortest circular-paths in planar graphs. The proposed algorithm is faster than the currently known algorithms for this problem, and it can also be applied to many alternative problems like shape matching. Part III of the thesis elaborates on different techniques to derive information about the physical 3-D world from the camera motion. In the segmentation system, we employ camera-motion estimation, but the obtained parameters have no direct physical meaning. Chapter 12 discusses an extension to the camera-motion estimation to factorize the motion parameters into physically meaningful parameters (rotation angles, focal-length) using camera autocalibration techniques. The speciality of the algorithm is that it can process camera motion that spans several sprites by employing the above multi-sprite technique. Consequently, the algorithm can be applied to arbitrary rotational camera motion. For the analysis of video sequences, it is often required to determine and follow the position of the objects. Clearly, the object position in image coordinates provides little information if the viewing direction of the camera is not known. Chapter 13 provides a new algorithm to deduce the transformation between the image coordinates and the real-world coordinates for the special application of sport-video analysis. In sport videos, the camera view can be derived from markings on the playing field. For this reason, we employ a model of the playing field that describes the arrangement of lines. After detecting significant lines in the input image, a combinatorial search is carried out to establish correspondences between lines in the input image and lines in the model. The algorithm requires no information about the specific color of the playing field and it is very robust to occlusions or poor lighting conditions. Moreover, the algorithm is generic in the sense that it can be applied to any type of sport by simply exchanging the model of the playing field. In Chapter 14, we again consider panoramic background images and particularly focus ib their visualization. Apart from the planar backgroundsprites discussed previously, a frequently-used visualization technique for panoramic images are projections onto a cylinder surface which is unwrapped into a rectangular image. However, the disadvantage of this approach is that the viewer has no good orientation in the panoramic image because he looks into all directions at the same time. In order to provide a more intuitive presentation of wide-angle views, we have developed a visualization technique specialized for the case of indoor environments. We present an algorithm to determine the 3-D shape of the room in which the image was captured, or, more generally, to compute a complete floor plan if several panoramic images captured in each of the rooms are provided. Based on the obtained 3-D geometry, a graphical model of the rooms is constructed, where the walls are displayed with textures that are extracted from the panoramic images. This representation enables to conduct virtual walk-throughs in the reconstructed room and therefore, provides a better orientation for the user. Summarizing, we can conclude that all segmentation techniques employ some definition of foreground objects. These definitions are either explicit, using object models like in Part II of this thesis, or they are implicitly defined like in the background synthetization in Part I. The results of this thesis show that implicit descriptions, which extract their definition from video content, work well when the sequence is long enough to extract this information reliably. However, high-level semantics are difficult to integrate into the segmentation approaches that are based on implicit models. Intead, those semantics should be added as postprocessing steps. On the other hand, explicit object models apply semantic pre-knowledge at early stages of the segmentation. Moreover, they can be applied to short video sequences or even still pictures since no background model has to be extracted from the video. The definition of a general object-modeling technique that is widely applicable and that also enables an accurate segmentation remains an important yet challenging problem for further research

Designing rough sets attributes reduction based video deinterlacing system

The use of rough set\u2019s theoretic concepts has permitted in this work to make the mathematical model on mode decision in deinterlacing system. In this paper, a rough set approach based decision making problem is proposed. In the literature, some conventional deinterlacing methods provide high performance with higher computational burden. On the other hand, some other methods give low performance with lower computational burden. Those all methods have been reported that interpolate missing pixels indiscriminately in the same way. Our algorithm chooses the most suitable method adaptively based on rough set theory using four parameters. This deinterlacing approach employs a size reduction of the database system, keeping only the essential information for the process, especially in the representation of and reasoning with vague and/or imprecise knowledge. Decision making and interpolation results are presented. The results of computer simulations show that the proposed method outperforms a number of methods presented in the literature

Media gateway utilizando um GPU

Mestrado em Engenharia de Computadores e Telemátic

Recent Advances in Signal Processing

The signal processing task is a very critical issue in the majority of new technological inventions and challenges in a variety of applications in both science and engineering fields. Classical signal processing techniques have largely worked with mathematical models that are linear, local, stationary, and Gaussian. They have always favored closed-form tractability over real-world accuracy. These constraints were imposed by the lack of powerful computing tools. During the last few decades, signal processing theories, developments, and applications have matured rapidly and now include tools from many areas of mathematics, computer science, physics, and engineering. This book is targeted primarily toward both students and researchers who want to be exposed to a wide variety of signal processing techniques and algorithms. It includes 27 chapters that can be categorized into five different areas depending on the application at hand. These five categories are ordered to address image processing, speech processing, communication systems, time-series analysis, and educational packages respectively. The book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Discrete Wavelet Transforms

The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications