On-Line Dependability Enhancement of Multiprocessor SoCs by Resource Management

This paper describes a new approach towards dependable design of homogeneous multi-processor SoCs in an example satellite-navigation application. First, the NoC dependability is functionally verified via embedded software. Then the Xentium processor tiles are periodically verified via on-line self-testing techniques, by using a new IIP Dependability Manager. Based on the Dependability Manager results, faulty tiles are electronically excluded and replaced by fault-free spare tiles via on-line resource management. This integrated approach enables fast electronic fault detection/diagnosis and repair, and hence a high system availability. The dependability application runs in parallel with the actual application, resulting in a very dependable system. All parts have been verified by simulation

Design for Test and Hardware Security Utilizing Tester Authentication Techniques

Design-for-Test (DFT) techniques have been developed to improve testability of integrated circuits. Among the known DFT techniques, scan-based testing is considered an efficient solution for digital circuits. However, scan architecture can be exploited to launch a side channel attack. Scan chains can be used to access a cryptographic core inside a system-on-chip to extract critical information such as a private encryption key. For a scan enabled chip, if an attacker is given unlimited access to apply all sorts of inputs to the Circuit-Under-Test (CUT) and observe the outputs, the probability of gaining access to critical information increases. In this thesis, solutions are presented to improve hardware security and protect them against attacks using scan architecture. A solution based on tester authentication is presented in which, the CUT requests the tester to provide a secret code for authentication. The tester authentication circuit limits the access to the scan architecture to known testers. Moreover, in the proposed solution the number of attempts to apply test vectors and observe the results through the scan architecture is limited to make brute-force attacks practically impossible. A tester authentication utilizing a Phase Locked Loop (PLL) to encrypt the operating frequency of both DUT/Tester has also been presented. In this method, the access to the critical security circuits such as crypto-cores are not granted in the test mode. Instead, a built-in self-test method is used in the test mode to protect the circuit against scan-based attacks. Security for new generation of three-dimensional (3D) integrated circuits has been investigated through 3D simulations COMSOL Multiphysics environment. It is shown that the process of wafer thinning for 3D stacked IC integration reduces the leakage current which increases the chip security against side-channel attacks

Optimal Test Access Mechanism (TAM) for Reducing Test Application Time of Core-Based SOCs

[[abstract]]In this paper, we propose an algorithm based on a framework of reconfigurable multiple scan chains for system-on-chip to minimize test application time. The control signal combination causes the computing time increasing exponentially, and the algorithm we proposed introduces a heuristic control signal selecting method to solve this serious problem. We also minimize the test application time by using the balancing method to assign registers into multiple scan chains. The results show that it could significantly reduces both the test application time and the computation time.[[notice]]補正完畢[[incitationindex]]EI[[booktype]]紙

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Programmable flexible cores for SoC applications

Tese de mestrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 200

Doctor of Philosophy

dissertationIn-memory big data applications are growing in popularity, including in-memory versions of the MapReduce framework. The move away from disk-based datasets shifts the performance bottleneck from slow disk accesses to memory bandwidth. MapReduce is a data-parallel application, and is therefore amenable to being executed on as many parallel processors as possible, with each processor requiring high amounts of memory bandwidth. We propose using Near Data Computing (NDC) as a means to develop systems that are optimized for in-memory MapReduce workloads, offering high compute parallelism and even higher memory bandwidth. This dissertation explores three different implementations and styles of NDC to improve MapReduce execution. First, we use 3D-stacked memory+logic devices to process the Map phase on compute elements in close proximity to database splits. Second, we attempt to replicate the performance characteristics of the 3D-stacked NDC using only commodity memory and inexpensive processors to improve performance of both Map and Reduce phases. Finally, we incorporate fixed-function hardware accelerators to improve sorting performance within the Map phase. This dissertation shows that it is possible to improve in-memory MapReduce performance by potentially two orders of magnitude by designing system and memory architectures that are specifically tailored to that end

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

Secure Split Test for Preventing IC Piracy by Un-Trusted Foundry and Assembly

In the era of globalization, integrated circuit design and manufacturing is spread across different continents. This has posed several hardware intrinsic security issues. The issues are related to overproduction of chips without knowledge of designer or OEM, insertion of hardware Trojans at design and fabrication phase, faulty chips getting into markets from test centers, etc. In this thesis work, we have addressed the problem of counterfeit IC‟s getting into the market through test centers. The problem of counterfeit IC has different dimensions. Each problem related to counterfeiting has different solutions. Overbuilding of chips at overseas foundry can be addressed using passive or active metering. The solution to avoid faulty chips getting into open markets from overseas test centers is secure split test (SST). The further improvement to SST is also proposed by other researchers and is known as Connecticut Secure Split Test (CSST). In this work, we focus on improvements to CSST techniques in terms of security, test time and area. In this direction, we have designed all the required sub-blocks required for CSST architecture, namely, RSA, TRNG, Scrambler block, study of benchmark circuits like S38417, adding scan chains to benchmarks is done. Further, as a security measure, we add, XOR gate at the output of the scan chains to obfuscate the signal coming out of the scan chains. Further, we have improved the security of the design by using the PUF circuit instead of TRNG and avoid the use of the memory circuits. This use of PUF not only eliminates the use of memory circuits, but also it provides the way for functional testing also. We have carried out the hamming distance analysis for introduced security measure and results show that security design is reasonably good.Further, as a future work we can focus on: • Developing the circuit which is secuered for the whole semiconductor supply chain with reasonable hamming distance and less area overhead

New techniques for functional testing of microprocessor based systems

Electronic devices may be affected by failures, for example due to physical defects. These defects may be introduced during the manufacturing process, as well as during the normal operating life of the device due to aging. How to detect all these defects is not a trivial task, especially in complex systems such as processor cores. Nevertheless, safety-critical applications do not tolerate failures, this is the reason why testing such devices is needed so to guarantee a correct behavior at any time. Moreover, testing is a key parameter for assessing the quality of a manufactured product. Consolidated testing techniques are based on special Design for Testability (DfT) features added in the original design to facilitate test effectiveness. Design, integration, and usage of the available DfT for testing purposes are fully supported by commercial EDA tools, hence approaches based on DfT are the standard solutions adopted by silicon vendors for testing their devices. Tests exploiting the available DfT such as scan-chains manipulate the internal state of the system, differently to the normal functional mode, passing through unreachable configurations. Alternative solutions that do not violate such functional mode are defined as functional tests. In microprocessor based systems, functional testing techniques include software-based self-test (SBST), i.e., a piece of software (referred to as test program) which is uploaded in the system available memory and executed, with the purpose of exciting a specific part of the system and observing the effects of possible defects affecting it. SBST has been widely-studies by the research community for years, but its adoption by the industry is quite recent. My research activities have been mainly focused on the industrial perspective of SBST. The problem of providing an effective development flow and guidelines for integrating SBST in the available operating systems have been tackled and results have been provided on microprocessor based systems for the automotive domain. Remarkably, new algorithms have been also introduced with respect to state-of-the-art approaches, which can be systematically implemented to enrich SBST suites of test programs for modern microprocessor based systems. The proposed development flow and algorithms are being currently employed in real electronic control units for automotive products. Moreover, a special hardware infrastructure purposely embedded in modern devices for interconnecting the numerous on-board instruments has been interest of my research as well. This solution is known as reconfigurable scan networks (RSNs) and its practical adoption is growing fast as new standards have been created. Test and diagnosis methodologies have been proposed targeting specific RSN features, aimed at checking whether the reconfigurability of such networks has not been corrupted by defects and, in this case, at identifying the defective elements of the network. The contribution of my work in this field has also been included in the first suite of public-domain benchmark networks