A QoE based performance study of mobile peer-to-peer live video streaming

Peer-to-peer (P2P) Mobile Ad Hoc Networks (MANETs) are widely envisioned to be a practical platform to mobile live video streaming applications (e.g., mobile IPTV). However, the performance of such a streaming solution is still largely unknown. As such, in this paper, we aim to quantify the streaming performance using a Quality of Experience (QoE) based approach. Our simulation results indicate that video streaming performance is highly sensitive to the video chunk size. Specifically, if the chunk size is small, performance, in terms of both QoE and QoS, is guaranteed but at the expense of a higher overhead. On the other hand, if chunk size is increased, performance can degrade quite rapidly. Thus, it needs some careful fine tuning of chunk size to obtain satisfactory QoE performance. © 2012 IEEE.published_or_final_versio

Fair Quality of Experience (QoE) Measurements Related with Networking Technologies

[Invited Talk] Eighth International Conference on Wired/Wireless Internet Communications (June 1-3, Luleå, Sweden)Proceeding of: 8th International Conference, WWIC 2010, Lulea, Sweden, June 1-3, 2010This paper addresses the topic of Fair QoE measurements in networking. The research of new solutions in networking is oriented to improve the user experience. Any application or service can be im- proved and the deployment of new solutions is mandatory to get the user satisfaction. However, different solutions exist; thus, it is necessary to select the most suitable ones. Nevertheless, this selection is difficult to make since the QoE is subjective and the comparison among different technologies is not trivial. The aim of this paper is to give an overview on how to perform fair QoE measurements to facilitate the study and re- search of new networking solutions and paradigms. However, previously to address this problem, an overview about how networking affects to the QoE is provided.This work has been funded by the CONTENT NoE from the European Commission (FP6- 2005-IST-41) and by the Ministry of Science and Innovation under the CON- PARTE project (MEC, TEC2007-67966-C03-03/TCM) and T2C2 project grant (TIN2008-06739-C04-01).Publicad

The CASPER user-centric approach for advanced service provisioning in mobile networks

Abstract This paper presents an overview of the project CASPER, 1 a 4-year Marie Curie Research and Innovation Staff Exchange (RISE) project running between 2016 and 2020, describing its objectives, approach, architecture, tools and key achievements. CASPER combines academic and industrial forces towards leveraging the expected benefits of Quality of Experience (QoE) exploitation in future networks. In order to achieve that, a QoE orchestrator has been proposed which implements the basic functionalities of QoE monitoring, estimation and management. With means of simulation and testbed emulation, CASPER has managed to develop a proprietary SDN Controller, which implements QoE-based traffic rerouting for the challenging scenario of HTTP adaptive video streaming, leading to more stable and higher QoE scores compared to a state-of-the-art SDN Controller implementation

Don't Repeat Yourself: Seamless Execution and Analysis of Extensive Network Experiments

This paper presents MACI, the first bespoke framework for the management, the scalable execution, and the interactive analysis of a large number of network experiments. Driven by the desire to avoid repetitive implementation of just a few scripts for the execution and analysis of experiments, MACI emerged as a generic framework for network experiments that significantly increases efficiency and ensures reproducibility. To this end, MACI incorporates and integrates established simulators and analysis tools to foster rapid but systematic network experiments. We found MACI indispensable in all phases of the research and development process of various communication systems, such as i) an extensive DASH video streaming study, ii) the systematic development and improvement of Multipath TCP schedulers, and iii) research on a distributed topology graph pattern matching algorithm. With this work, we make MACI publicly available to the research community to advance efficient and reproducible network experiments

Measurement-Driven Algorithm and System Design for Wireless and Datacenter Networks

The growing number of mobile devices and data-intensive applications pose unique challenges for wireless access networks as well as datacenter networks that enable modern cloud-based services. With the enormous increase in volume and complexity of traffic from applications such as video streaming and cloud computing, the interconnection networks have become a major performance bottleneck. In this thesis, we study algorithms and architectures spanning several layers of the networking protocol stack that enable and accelerate novel applications and that are easily deployable and scalable. The design of these algorithms and architectures is motivated by measurements and observations in real world or experimental testbeds. In the first part of this thesis, we address the challenge of wireless content delivery in crowded areas. We present the AMuSe system, whose objective is to enable scalable and adaptive WiFi multicast. AMuSe is based on accurate receiver feedback and incurs a small control overhead. This feedback information can be used by the multicast sender to optimize multicast service quality, e.g., by dynamically adjusting transmission bitrate. Specifically, we develop an algorithm for dynamic selection of a subset of the multicast receivers as feedback nodes which periodically send information about the channel quality to the multicast sender. Further, we describe the Multicast Dynamic Rate Adaptation (MuDRA) algorithm that utilizes AMuSe's feedback to optimally tune the physical layer multicast rate. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. We implemented the AMuSe system on the ORBIT testbed and evaluated its performance in large groups with approximately 200 WiFi nodes. Our extensive experiments demonstrate that AMuSe can provide accurate feedback in a dense multicast environment. It outperforms several alternatives even in the case of external interference and changing network conditions. Further, our experimental evaluation of MuDRA on the ORBIT testbed shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of nodes while meeting quality requirements. As an example application, MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality. Next, we specifically focus on ensuring high Quality of Experience (QoE) for video streaming over WiFi multicast. We formulate the problem of joint adaptation of multicast transmission rate and video rate for ensuring high video QoE as a utility maximization problem and propose an online control algorithm called DYVR which is based on Lyapunov optimization techniques. We evaluated the performance of DYVR through analysis, simulations, and experiments using a testbed composed of Android devices and o the shelf APs. Our evaluation shows that DYVR can ensure high video rates while guaranteeing a low but acceptable number of segment losses, buffer underflows, and video rate switches. We leverage the lessons learnt from AMuSe for WiFi to address the performance issues with LTE evolved Multimedia Broadcast/Multicast Service (eMBMS). We present the Dynamic Monitoring (DyMo) system which provides low-overhead and real-time feedback about eMBMS performance. DyMo employs eMBMS for broadcasting instructions which indicate the reporting rates as a function of the observed Quality of Service (QoS) for each UE. This simple feedback mechanism collects very limited QoS reports which can be used for network optimization. We evaluated the performance of DyMo analytically and via simulations. DyMo infers the optimal eMBMS settings with extremely low overhead, while meeting strict QoS requirements under different UE mobility patterns and presence of network component failures. In the second part of the thesis, we study datacenter networks which are key enablers of the end-user applications such as video streaming and storage. Datacenter applications such as distributed file systems, one-to-many virtual machine migrations, and large-scale data processing involve bulk multicast flows. We propose a hardware and software system for enabling physical layer optical multicast in datacenter networks using passive optical splitters. We built a prototype and developed a simulation environment to evaluate the performance of the system for bulk multicasting. Our evaluation shows that the optical multicast architecture can achieve higher throughput and lower latency than IP multicast and peer-to-peer multicast schemes with lower switching energy consumption. Finally, we study the problem of congestion control in datacenter networks. Quantized Congestion Control (QCN), a switch-supported standard, utilizes direct multi-bit feedback from the network for hardware rate limiting. Although QCN has been shown to be fast-reacting and effective, being a Layer-2 technology limits its adoption in IP-routed Layer 3 datacenters. We address several design challenges to overcome QCN feedback's Layer- 2 limitation and use it to design window-based congestion control (QCN-CC) and load balancing (QCN-LB) schemes. Our extensive simulations, based on real world workloads, demonstrate the advantages of explicit, multi-bit congestion feedback, especially in a typical environment where intra-datacenter traffic with short Round Trip Times (RTT: tens of s) run in conjunction with web-facing traffic with long RTTs (tens of milliseconds)

Machine learning for Quality of Experience in real-time applications

L'abstract è presente nell'allegato / the abstract is in the attachmen