Designing a fuzzy scheduler for hard real-time systems

In hard real-time systems, tasks have to be performed not only correctly, but also in a timely fashion. If timing constraints are not met, there might be severe consequences. Task scheduling is the most important problem in designing a hard real-time system, because the scheduling algorithm ensures that tasks meet their deadlines. However, the inherent nature of uncertainty in dynamic hard real-time systems increases the problems inherent in scheduling. In an effort to alleviate these problems, we have developed a fuzzy scheduler to facilitate searching for a feasible schedule. A set of fuzzy rules are proposed to guide the search. The situation we are trying to address is the performance of the system when no feasible solution can be found, and therefore, certain tasks will not be executed. We wish to limit the number of important tasks that are not scheduled

Towards an HLA Run-time Infrastructure with Hard Real-time Capabilities

Our work takes place in the context of the HLA standard and its application in real-time systems context. The HLA standard is inadequate for taking into consideration the different constraints involved in real-time computer systems. Many works have been invested in order to providing real-time capabilities to Run Time Infrastructures (RTI) to run real time simulation. Most of these initiatives focus on major issues including QoS guarantee, Worst Case Transit Time (WCTT) knowledge and scheduling services provided by the underlying operating systems. Even if our ultimate objective is to achieve real-time capabilities for distributed HLA federations executions, this paper describes a preliminary work focusing on achieving hard real-time properties for HLA federations running on a single computer under Linux operating systems. Our paper proposes a novel global bottom up approach for designing real-time Run time Infrastructures and a formal model for validation of uni processor to (then) distributed real-time simulation with CERTI

Design of Energy-efficient Hierarchical Scheduling for Integrated Modular Avionics Systems

AbstractRecently the integrated modular avionics (IMA) architecture which introduces the concept of resource partitions becomes popular as an alternative to the traditional federated architecture. This study investigates the problem of designing hierarchical scheduling for IMA systems. The proposed scheduler model enables strong temporal partitioning, so that multiple hard real-time applications can be easily integrated into an uniprocessor platform. This paper derives the mathematic relationships among partition cycle, partition capacity and schedulability under the real-time condition, and then proposes an algorithm for optimizing partition parameters. Real-time tasks with arbitrary deadlines are considered for generality. To further improve the basic algorithm and reduce the energy consumption for embedded systems in aircraft, a power optimization approach is also proposed by exploiting the slack time. Experimental results show that the designed system can guarantee the hard real-time requirement and reduce the power consumption by at least 14%

ADL: a graphical design language for real time parallel applications

Designing parallel applications is generally experienced as a tedious and difficult task, especially when hard real-time performance requirements have to be met. This paper discusses on-going work concerning the construction of a Design Entry System which supports the design phase of parallel real-time industrial application development. In particular, in this paper we pay attention to the development and implementation of a graphical Application Design Language. The work is part of the ESPRIT project Hamlet which focuses on industrial application of transputer-based systems for commercially strategic real-time applications

Adaptive Task Automata with Earliest-Deadline-First Scheduling

Adjusting to resource changes, dynamic environmental conditions, or new usage modes are some of the reasons why real-time embedded systems need to be adaptive. This requires a rigorous framework for designing such systems, to ensure that the adaptivity does not result in invalidating the system’s real-time constraints. To address this need, we have recently introduced adaptive task automata, a framework for modeling, verification, and schedulability analysis in adaptive, hard real-time embedded systems, assuming a fixed-priority scheduler. In this work, we extend the adaptive task automata framework to incorporate the earliest-deadline-first scheduling policy, as well as enable implementation of any other dynamic scheduling policy. To prove the decidability of our model, and at the same time maintain a manageable degree of conciseness, we show an encoding of our model as a network of timed automata with clock updates. To support this, we also show that reachability in our class of timed automata with updates is decidable. Our contribution helps to streamline the process of designing safety critical adaptive embedded systems

Robust Software Architecture for Robots

Robust Real-Time Reconfigurable Robotics Software Architecture (R4SA) is the name of both a software architecture and software that embodies the architecture. The architecture was conceived in the spirit of current practice in designing modular, hard, realtime aerospace systems. The architecture facilitates the integration of new sensory, motor, and control software modules into the software of a given robotic system. R4SA was developed for initial application aboard exploratory mobile robots on Mars, but is adaptable to terrestrial robotic systems, real-time embedded computing systems in general, and robotic toys

Software tools for real-time simulation and control

The objective of this thesis is to design and simulate a multi-agent based energy management system for a shipboard power system in hard real-time environment. The automatic reconfiguration of shipboard power systems is essential to improve survivability. Multi-agent technology is used in designing the reconfigurable energy management system using a self-stabilizing maximum flow algorithm. The agent based energy management system is designed in a Matlab/Simulink environment. Reconfiguration is performed for several situations including start-up, loss of an agent, limited available power, and distribution to priority ranked loads. The number of steps taken to reach the global solution and the time taken are very promising. With the growing importance of timing accuracy in simulating control systems during design and development, there is an increased need for these simulations to run in a real-time environment. This research further focuses on software tools that support hard real-time environment to run real-time simulations. A detailed survey has been conducted on freely available real-time operating systems and other software tools to setup a desktop PC supporting real-time environment. Matlab/Simulink/RTW-RTAI was selected as real-time computer aided control design software for demonstrating real-time simulation of agent based energy management system. The timing accuracy of these simulations has been verified successfully

A Control-Theoretic Design And Analysis Framework For Resilient Hard Real-Time Systems

We introduce a new design metric called system-resiliency which characterizes the maximum unpredictable external stresses that any hard-real-time performance mode can withstand. Our proposed systemresiliency framework addresses resiliency determination for real-time systems with physical and hardware limitations. Furthermore, our framework advises the system designer about the feasible trade-offs between external system resources for the system operating modes on a real-time system that operates in a multi-parametric resiliency environment. Modern multi-modal real-time systems degrade the system’s operational modes as a response to unpredictable external stimuli. During these mode transitions, real-time systems should demonstrate a reliable and graceful degradation of service. Many control-theoretic-based system design approaches exist. Although they permit real-time systems to operate under various physical constraints, none of them allows the system designer to predict the system-resiliency over multi-constrained operating environment. Our framework fills this gap; the proposed framework consists of two components: the design-phase and runtime control. With the design-phase analysis, the designer predicts the behavior of the real-time system for variable external conditions. Also, the runtime controller navigates the system to the best desired target using advanced control-theoretic techniques. Further, our framework addresses the system resiliency of both uniprocessor and multicore processor systems. As a proof of concept, we first introduce a design metric called thermal-resiliency, which characterizes the maximum external thermal stress that any hard-real-time performance mode can withstand. We verify the thermal-resiliency for the external thermal stresses on a uniprocessor system through a physical testbed. We show how to solve some of the issues and challenges of designing predictable real-time systems that guarantee hard deadlines even under transitions between modes in an unpredictable thermal environment where environmental temperature may dynamically change using our new metric. We extend the derivation of thermal-resiliency to multicore systems and determine the limitations of external thermal stress that any hard-real-time performance mode can withstand. Our control-theoretic framework allows the system designer to allocate asymmetric processing resources upon a multicore proiii cessor and still maintain thermal constraints. In addition, we develop real-time-scheduling sub-components that are necessary to fully implement our framework; toward this goal, we investigate the potential utility of parallelization for meeting real-time constraints and minimizing energy. Under malleable gang scheduling of implicit-deadline sporadic tasks upon multiprocessors, we show the non-necessity of dynamic voltage/frequency regarding optimality of our scheduling problem. We adapt the canonical schedule for DVFS multiprocessor platforms and propose a polynomial-time optimal processor/frequency-selection algorithm. Finally, we verify the correctness of our framework through multiple measurable physical and hardware constraints and complete our work on developing a generalized framework

The development of hard real-time systems using a formal approach

Hard real-time systems are a class of computer control systems that must react to demands of their environment by providing `correct' and timely responses. Since these systems are increasingly being used in systems with safety implications, it is crucial that they are designed and developed to operate in a correct manner. This thesis is concerned with developing formal techniques that allow the specification, verification and design of hard real-time systems. Formal techniques for hard real-time systems must be capable of capturing the system's functional and performance requirements, and previous work has proposed a number of techniques which range from the mathematically intensive to those with some mathematical content. This thesis develops formal techniques that contain both an informal and a formal component because it is considered that the informality provides ease of understanding and the formality allows precise specification and verification. Specifically, the combination of Petri nets and temporal logic is considered for the specification and verification of hard real-time systems. Approaches that combine Petri nets and temporal logic by allowing a consistent translation between each formalism are examined. Previously, such techniques have been applied to the formal analysis of concurrent systems. This thesis adapts these techniques for use in the modelling, design and formal analysis of hard real-time systems. The techniques are applied to the problem of specifying a controller for a high-speed manufacturing system. It is shown that they can be used to prove liveness and safety properties, including qualitative aspects of system performance. The problem of verifying quantitative real-time properties is addressed by developing a further technique which combines the formalisms of timed Petri nets and real-time temporal logic. A unifying feature of these techniques is the common temporal description of the Petri net. A common problem with Petri net based techniques is the complexity problems associated with generating the reachability graph. This thesis addresses this problem by using concurrency sets to generate a partial reachability graph pertaining to a particular state. These sets also allows each state to be checked for the presence of inconsistencies and hazards. The problem of designing a controller for the high-speed manufacturing system is also considered. The approach adopted mvolves the use of a model-based controller: This type of controller uses the Petri net models developed, thus preservIng the properties already proven of the controller. It. also contains a model of the physical system which is synchronised to the real application to provide timely responses. The various way of forming the synchronization between these processes is considered and the resulting nets are analysed using concurrency sets

Side-Channel Protected MPSoC through Secure Real-Time Networks-on-Chip

The integration of Multi-Processors System-on-Chip (MPSoCs) into the Internet -of -Things (IoT) context brings new opportunities, but also represent risks. Tight real-time constraints and security requirements should be considered simultaneously when designing MPSoCs. Network-on-Chip (NoCs) are specially critical when meeting these two conflicting characteristics. For instance the NoC design has a huge influence in the security of the system. A vital threat to system security are so-called side-channel attacks based on the NoC communication observations. To this end, we propose a NoC security mechanism suitable for hard real-time systems, in which schedulability is a vital design requirement. We present three contributions. First, we show the impact of the NoC routing in the security of the system. Second, we propose a packet route randomisation mechanism to increase NoC resilience against side-channel attacks. Third, using an evolutionary optimisation approach, we effectively apply route randomisation while controlling its impact on hard real-time performance guarantees. Extensive experimental evidence based on analytical and simulation models supports our findings