29 research outputs found
Recommended from our members
On Co-Optimization Of Constrained Satisfiability Problems For Hardware Software Applications
Manufacturing technology has permitted an exponential growth in transistor count and density. However, making efficient use of the available transistors in the design has become exceedingly difficult. Standard design flow involves synthesis, verification, placement and routing followed by final tape out of the design. Due to the presence of various undesirable effects like capacitive crosstalk, supply noise, high temperatures, etc., verification/validation of the design has become a challenging problem. Therefore, having a good design convergence may not be possible within the target time, due to a need for a large number of design iterations.
Capacitive crosstalk is one of the major causes of design convergence problems in deep sub-micron era. With scaling, the number of crosstalk violations has been increasing because of reduced inter-wire distances. Consequently only the most severe crosstalk faults are fixed pre-silicon while the rest are tested post-silicon. Testing for capacitive crosstalk involves generation of input patterns which can be applied post-silicon to the integrated circuit and comparison of the output response. These patterns are generated at the gate/ Register Transfer Level (RTL) of abstraction using Automatic Test Pattern Generation (ATPG) tools. In this dissertation, anInteger Linear Programming (ILP) based ATPG technique for maximizing crosstalk induced delay increase at the victim net, for multiple aggressor crosstalk faults, is presented. Moreover, various solutions for pattern generation considering both zero as well as unit delay models is also proposed.
With voltage scaling, power supply switching noise has become one of the leading causes of signal integrity related failures in deep sub-micron designs. Hence, during power supply network design and analysis of power supply switching noise, computation of peak supply current is an essential step. Traditional peak current estimation approaches involve addition of peak current associated with all the CMOS gates which are switching in a combinational circuit. Consequently, this approach does not take the Boolean and temporal relationships of the circuit into account. This work presents an ILP based technique for generation of an input pattern pair which maximizes switching supply currents for a combinational circuit in the presence of integer gate delays. The input pattern pair generated using the above approach can be applied post-silicon for power droop testing.
With high level of integration, Multi-Processor Systems on Chip (MPSoC) feature multiple processor cores and accelerators on the same die, so as to exploit the instruction level parallelism in the application. For hardware-software co-design, application programming model is based on a Task Graph, which represents task dependencies and execution/transfer times for various threads and processes within an application. Mapping an application to an MPSoC traditionally involves representing it in the form of a task graph and employing static scheduling in order to minimize the schedule length. Dynamic system behavior is not taken into consideration during static scheduling, while dynamic scheduling requires the knowledge of task graph at runtime. A run-time task graph extraction heuristic to facilitate dynamic scheduling is also presented here. A novel game theory based approach uses this extracted task graph to perform run-time scheduling in order to minimize total schedule length.
With increase in transistor density, power density has gone up substantially. This has lead to generation of regions with very high temperature called Hotspots. Hotspots lead to reliability and performance issues and affect design convergence. In current generation Integrated Circuits (ICs) temperature is controlled by reducing power dissipation using Dynamic Thermal Management (DTM) techniques like frequency and/or voltage scaling. These techniques are reactive in nature and have detrimental effects on performance. Here, a look-ahead based task migration technique is proposed, in order to utilize the multitude of cores available in an MPSoC to eliminate thermal emergencies. Our technique is based on temperature prediction, leveraging upon a novel wavelet based thermal modeling approach.
Hence, this work addresses several optimization problems that can be reduced to constrained max-satisfiability, involving integer as well as Boolean constraints in hardware and software domains. Moreover, it provides domain specific heuristic solutions for each of them
Hardware and Software Optimizations for Accelerating Deep Neural Networks: Survey of Current Trends, Challenges, and the Road Ahead
Currently, Machine Learning (ML) is becoming ubiquitous in everyday life. Deep Learning (DL) is already present in many applications ranging from computer vision for medicine to autonomous driving of modern cars as well as other sectors in security, healthcare, and finance. However, to achieve impressive performance, these algorithms employ very deep networks, requiring a significant computational power, both during the training and inference time. A single inference of a DL model may require billions of multiply-and-accumulated operations, making the DL extremely compute-and energy-hungry. In a scenario where several sophisticated algorithms need to be executed with limited energy and low latency, the need for cost-effective hardware platforms capable of implementing energy-efficient DL execution arises. This paper first introduces the key properties of two brain-inspired models like Deep Neural Network (DNN), and Spiking Neural Network (SNN), and then analyzes techniques to produce efficient and high-performance designs. This work summarizes and compares the works for four leading platforms for the execution of algorithms such as CPU, GPU, FPGA and ASIC describing the main solutions of the state-of-the-art, giving much prominence to the last two solutions since they offer greater design flexibility and bear the potential of high energy-efficiency, especially for the inference process. In addition to hardware solutions, this paper discusses some of the important security issues that these DNN and SNN models may have during their execution, and offers a comprehensive section on benchmarking, explaining how to assess the quality of different networks and hardware systems designed for them
Dependable Embedded Systems
This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems
Resource Allocation for Software Pipelines in Many-core Systems
Many-core systems integrate a growing number of cores on a single chip and are expected to integrate hundreds and even thousands of cores soon. Despite their massive processing power, it is crucial to employ their resources efficiently to benefit from parallel processing. This dissertation tackles a major challenge, resource allocation, for complex, memory-intensive applications. The proposed methods allow to significantly improve the performance over the state of the art in many scenarios
Architectures for Adaptive Low-Power Embedded Multimedia Systems
This Ph.D. thesis describes novel hardware/software architectures for adaptive low-power embedded multimedia systems. Novel techniques for run-time adaptive energy management are proposed, such that both HW & SW adapt together to react to the unpredictable scenarios. A complete power-aware H.264 video encoder was developed. Comparison with state-of-the-art demonstrates significant energy savings while meeting the performance constraint and keeping the video quality degradation unnoticeable
Optimization Tools for ConvNets on the Edge
L'abstract è presente nell'allegato / the abstract is in the attachmen
Efficient implementation of resource-constrained cyber-physical systems using multi-core parallelism
The quest for more performance of applications and systems became more challenging in the recent years. Especially in the cyber-physical and mobile domain, the performance requirements increased significantly. Applications, previously found in the high-performance domain, emerge in the area of resource-constrained domain. Modern heterogeneous high-performance MPSoCs provide a solid foundation to satisfy the high demand. Such systems combine general processors with specialized accelerators ranging from GPUs to machine learning chips. On the other side of the performance spectrum, the demand for small energy efficient systems exposed by modern IoT applications increased vastly. Developing efficient software for such resource-constrained multi-core systems is an error-prone, time-consuming and challenging task. This thesis provides with PA4RES a holistic semiautomatic approach to parallelize and implement applications for such platforms efficiently. Our solution supports the developer to find good trade-offs to tackle the requirements exposed by modern applications and systems. With PICO, we propose a comprehensive approach to express parallelism in sequential applications. PICO detects data dependencies and implements required synchronization automatically. Using a genetic algorithm, PICO optimizes the data synchronization. The evolutionary algorithm considers channel capacity, memory mapping, channel merging and flexibility offered by the channel implementation with respect to execution time, energy consumption and memory footprint. PICO's communication optimization phase was able to generate a speedup almost 2 or an energy improvement of 30% for certain benchmarks.
The PAMONO sensor approach enables a fast detection of biological viruses using optical methods. With a sophisticated virus detection software, a real-time virus detection running on stationary computers was achieved.
Within this thesis, we were able to derive a soft real-time capable virus detection running on a high-performance embedded system, commonly found in today's smart phones. This was accomplished with smart DSE algorithm which optimizes for execution time, energy consumption and detection quality. Compared to a baseline implementation, our solution achieved a speedup of 4.1 and 87\% energy savings and satisfied the soft real-time requirements. Accepting a degradation of the detection quality, which still is usable in medical context, led to a speedup of 11.1. This work provides the fundamentals for a truly mobile real-time virus detection solution. The growing demand for processing power can no longer satisfied following well-known approaches like higher frequencies. These so-called performance walls expose a serious challenge for the growing performance demand. Approximate computing is a promising approach to overcome or at least shift the performance walls by accepting a degradation in the output quality to gain improvements in other objectives. Especially for a safe integration of approximation into existing application or during the development of new approximation techniques, a method to assess the impact on the output quality is essential.
With QCAPES, we provide a multi-metric assessment framework to analyze the impact of approximation.
Furthermore, QCAPES provides useful insights on the impact of approximation on execution time and energy consumption. With ApproxPICO we propose an extension to PICO to consider approximate computing during the parallelization of sequential applications