699 research outputs found

    A Novel Coplanar Waveguide-Fed Compact Microstrip Antenna for Future 5G Applications

    Get PDF
    In this study, a coplanar waveguide-fed compact microstrip antenna design for applications operating at higher 5G bands was proposed. The antenna with the compact size of 8 x 12.2 mm2 on FR4 substrate, having the dielectric constant of 4.3 and the height of 1.55 mm, was considered. The dimensions of the radiating patch and ground plane were optimized with the use of artificial cooperative search (ACS) algorithm to provide the desired return loss performance of the designed antenna. The performance analysis was done by using full-wave electromagnetic package programs based on the method of moment (MoM) and the finite integration technique (FIT). The 10 dB bandwidth for return loss results obtained with the use of the computation methods show that the proposed antenna performs well for 5G applications operating in the 24.25 – 27.50 GHz, 26.50 – 29.50 GHz, 27.50 – 28.35 GHz and 37 – 40 GHz frequency bands

    Passive Planar Microwave Devices

    Get PDF
    The aim of this book is to highlight some recent advances in microwave planar devices. The development of planar technologies still generates great interest because of their many applications in fields as diverse as wireless communications, medical instrumentation, remote sensing, etc. In this book, particular interest has been focused on an electronically controllable phase shifter, wireless sensing, a multiband textile antenna, a MIMO antenna in microstrip technology, a miniaturized spoof plasmonic antipodal Vivaldi antenna, a dual-band balanced bandpass filter, glide-symmetric structures, a transparent multiband antenna for vehicle communications, a multilayer bandpass filter with high selectivity, microwave planar cutoff probes, and a wideband transition from microstrip to ridge empty substrate integrated waveguide

    Automated optimization for broadband flat-gain antenna designs with artificial neural network

    Get PDF
    An automated optimization process for designing and optimising high-performance single microstrip antennas is presented. It consists of the successive use of two optimization methods, bottom-up optimization (BUO) and Bayesian optimization (BO), which are applied sequentially, resulting in electromagnetic (EM)-based artificial neural network modelling. The BUO method is applied for the initial design of the structure of the antennas whereas the BO approach is successively implemented to predict suitable dimensional parameters, leading to broadband, high flat-gain antennas. The optimization process is performed automatically with the combination of an electronic design automation tool and a numerical analyser. The proposed method is easy to use; it allows one to perform the design with little experience, because both structure modelling and sizing are performed automatically. To verify the power of the proposed EM-based method experimentally, two single microstrip antennas have been designed, optimised, fabricated, and measured. The first antenna has flat-gain performance (6.9–7.2 dB) in a frequency band of 8.8–10 GHz. The second has been designed to perform in the 8.7- to 10-GHz band, where it exhibits flat-gain performance with reduced fluctuation in the range of 6.7–7 dB. The experimental results are in good agreement with the numerical data

    Bandwidth Optimization of Microstrip Patch Antenna- A Basic Overview

    Get PDF
    An antenna is a very important device in wireless applications. It converts the electrical energy into RF signal at the transmitter and RF signal into electrical energy at the receiver side. A micro strip antenna consists of a rectangular patch on a ground plane separated by dielectric substrate. The patch in the antenna is made of a conducting material Cu (Copper) or Au (Gold) and this can be in any shape of rectangular, circular, triangular, elliptical or some other common shape. Researches of past few year shows that, various work on Microstrip Patch Antenna is attentive on designing compact sized Microstrip Antenna with efficiency and bandwidth optimized. But inherently Microstrip Patch Antenna have narrow bandwidth so to enhance bandwidth various techniques are engaged. Today’s Communication devices need several applications which require higher bandwidth; such as mobile phones these days are getting thinner and smarter but many applications supported by them require higher bandwidth, so microstrip antenna used for performing this operation should provide wider bandwidth as well as their shape should be more efficient and size should be compact so that it should occupy less space while keeping the size of device as small as possible. In this review paper, a review of different techniques used for bandwidth optimization & various shapes of compact and broadband microstrip patch antenna is given

    Hybrid Evolutionary Computing Assisted Irregular-Shaped Patch Antenna Design for Wide Band Applications

    Get PDF
    A novel optimization concept for modeling irregular-shaped patch antenna with high bandwidth and efficient radiation attributes is proposed in this paper, along with the ability to accomplish the design at a reduced computational and cost burden. A revolutionary computing perception is established with Gravitational Search Algorithm (GSA) and Quantum Based Delta Particle Swarm Optimization (QPSO), now known as GSA-QPSO. The suggested model employed the GSA-QPSO algorithm strategically interfaced with a high-frequency structure simulator (HFSS) software through a Microsoft Visual Basic script to enhance irregular-shaped antenna design while maintaining wide bandwidth with suitable radiation efficiency over the target bandwidth region. The optimally designed microstrip patch antenna is fabricated on an FR-4 substrate with a surface area of 30×30×1.6 mm 3 . The evaluated outcome shows 96 % supreme radiation efficacy at 2.4 GHz whereas overall effectiveness is above 84% over the entire frequency range, with a nearly omnidirectional radiation pattern. In terms of impedance bandwidth, the suggested antenna offers 126.6 % over the operational frequency range from 2.34 GHz to 10.44 GHz. Fabrication and measurement results are also used to validate the simulated results. It exhibits the proficiency of the offered antenna design to be used for real-world wideband (WB) communication drives

    Automated design optimisation and simulation of stitched antennas for textile devices

    Get PDF
    This thesis describes a novel approach for designing 7-segment and 5-angle pocket and collar planar antennas (for operation at 900 MHz). The motivation for this work originates from the problem of security of children in rural Nigeria where there is risk of abduction. There is a strong potential benefit to be gained from hidden wireless tracking devices (and hence antennas) that can protect their security. An evolutionary method based on a genetic algorithm was used in conjunction with electromagnetic simulation. This method determines the segment length and angle between segments through several generations. The simulation of the antenna was implemented using heuristic crossover with non-uniform mutation. Antennas obtained from the algorithm were fabricated and measured to validate the proposed method.This first part of this research has been limited to linear wire antennas because of the wide range and flexibility of this class of antennas. Linear wire antennas are used for the design of high or low gain, broad or narrow band antennas. Wire antennas are easy and inexpensive to build. All the optimised linear wire antenna samples exhibit similar performances, most of the power is radiated within the GSM900 frequency band. The reflection coefficient (S11) is generally better than -10dB. The method of moment (MoM-NEC2) and FIT (CST Studio Suite 2015) solvers were used for this design. MATLAB is used to as an interface to control computational electromagnetic solvers for antenna designs and analysis. The genetic algorithm procedures were written in MATLAB. The second part of the work focuses on meshed ground planes for applications at 900 MHz global system for mobile communications (GSM), 2.45 GHz industrial, scientific, and medical (ISM) band and 5 GHz wearable wireless local area networks (WLAN) frequencies. Square ground planes were developed and designed using linear equations in MATLAB. The ground plane was stitched using embroidery machines. To examine the effect of meshing on the antenna performance and to normalise the meshed antenna to a reference, solid patch antenna was designed, fabricated on an FR4 substrate. A finite grid of resistors was created for numerical simulation in MATLAB. The resistance from the centre to any node of a finite grid of resistors are evaluated using nodal analysis. The probability that a node connects to each node in the grid was computed. The circuit model has been validated against the experimental model by measurement of the meshed ground plane. A set of measurement were collected from a meshed and compared with the numerical values, they show good agreement.</div

    Methods to Design Microstrip Antennas for Modern Applications

    Get PDF

    Geometry Modification Assessment and Design Optimization of Miniaturized Wideband Antennas

    Get PDF
    Maintaining small physical dimensions of antenna structures is an important consideration for contemporary wireless communication systems. Typically, antenna miniaturization is achieved through various topological modifications of the basic antenna geometries. The modifications can be applied to the ground plane, the feed line, and/or antenna radiator. Unfortunately, various topology alteration options are normally reported on a case-to-case basis. The literature is lacking systematic investigations or comparisons of different modification methods and their effects on antenna miniaturization rate as well as electrical performance. Another critical issue—apart from setting up the antenna topology—is a proper adjustment of geometry parameters of the structure so that the optimum design can be identified. Majority of researchers utilize experience-driven parameter sweeping which typically yields designs that are acceptable, but definitely not optimal. Furthermore, in many of the cases, the authors provide a cooperative progression before and after topological modifications that generally lead to a certain reduction of the antenna size, however, with appropriate parameter adjustment missing. Consequently, suitability of particular modifications in the miniaturization context is not conclusively assessed. In order to carry out such an assessment in a reliable manner, identification of the truly optimum design is necessary. This requires rigorous numerical optimization of all antenna parameters (especially in the case of complex antenna topologies) with the primary objective being size reduction, and supplementary constraints imposed on selected electrical or field characteristics. This thesis is an attempt to carry out systematic investigations concerning the relevance of geometry modifications in the context of wideband antenna miniaturization. The studies are carried out based on selected benchmark sets of wideband antennas. In order to ensure a fair comparison, all geometry parameters are rigorously tuned through EM-driven optimization to obtain the minimum footprint while maintaining acceptable electrical performance. The results demonstrate that it is possible to conclusively distinguish certain classes of topology alterations that are generally advantageous in the context of size reduction, as well as quantify the benefits of modifications applied to various parts of the antenna structure, e.g., with feed line modifications being more efficient than the ground plane and radiator ones. Several counterexamples have been discussed as well, indicating that certain modifications can be counterproductive when introduced ad hoc and without proper parameter tuning. The results of these investigations have been utilized to design several instances of novel compact wideband antennas with the focus on isolation improvement and overall antenna size reduction in multi-input-multi-output (MIMO) systems. Experimental validations confirming the numerical findings are also provided. To the best of the author’s knowledge, the presented study is the first systematic investigation of this kind in the literature and can be considered a step towards the development of better, low-cost, and more compact antennas for wireless communication systems.Fyrir þráðlaus fjarskiptakerfi er mikilvægt að tryggja að loftnet séu lítil að umfangi. Yfirleitt er smækkun loftneta náð með ýmis konar formbreytingum á grunngerðum þeirra. Formbreytingarnar geta verið á jarðtengingu, fæðilínu og / eða geislagjafa. Því miður er venjulega einungis sagt frá slíkum formbreytingum fyrir einstaka tilvik. Skortur er á kerfisbundnu mati og samanburði á mismunandi formbreytingum og hvaða áhrif þær hafa á smækkun og raffræðilega eiginleika loftneta. Annað mikilvægt atriði, fyrir utan að ákveða gerð formbreytingarinnar, er að velja stika sem lýsa nákvæmri lögun svo að bestuð hönnun geti átt sér stað. Flestir hönnuðir notast við þá aðferð að notast við stikaskimun sem byggir á reynslugögnum, en sú aðferð skilar almennt ásættanlegri hönnun, þó ekki bestaðri. Einnig er í mörgum tilvikum sagt frá samhliða þróun fyrir og eftir formbreytingu sem leiðir til smækkunar án þess að tilgreina breytingar á stikum. Fyrir vikið er erfitt að meta til hlítar ávinning af mismunandi formbreytingum. Til þess að framkvæma slíkt mat með áreiðanlegum hætti er nauðsynlegt að geta metið bestu hönnunarútfærslu nákvæmlega. Þetta kallar á ítarlega tölulega bestun allra stika sem lýsa loftnetinu (einkum fyrir loftnet flókinnar lögunnar) þar sem aðalmarkmkið bestunar er smækkun en skorður eru settar af raffræðilegum eiginleikum. Í þessari ritgerð er leitast við að kerfisbundna rannsókn á mikilvægi formbreytingna í tengslum við smækkun bandbreiðra loftneta. Rannsóknin byggir á völdum söfnum viðmiðunarloftneta. Til að tryggja rétt mat eru allir stikar er varða lögun stilltir með rafsegulfræðilegri hermun til að tryggja minnst rúmtak með ásættanlegum raffræðilegum eiginleikum. Niðurstöðurnar sýna að unnt er að greina, án vafa, ákveðna flokka formbreytinga sem eru að jafnaði til þess fallnir að smækka loftnet. Auk þessa er hægt að reikna ávinning af formbreytingum mismunandi hluta loftnetsins, t.d. að breytingar á fæðilínu eru almennt hagkvæmari en breytingar á geislagjafa eða jarðtengingu. Þá er greint frá nokkrum tilvikum þar sem tilfallandi formbreytingar geta verið til tjóns ef ekki stikaval er ekki gert með réttum hætti. Niðurstöður þessara rannsóknar hafa verið notaðar til að hanna nokkur nýstárleg breiðbandsloftnet með áherslu á smækkun og bættan aðskilnað fjölgátta (MIMO) loftneta. Töluleg hermun er sannreynd með tilraunum. Að bestu vitund höfundar er hér um fyrstu kerfisbundnu rannsókn þessarar gerðar að ræða og má reikna með að hún leiði til þróunar betri, ódýrari og smærri loftneta fyrir þráðlaus fjarskiptakerfi.The Ph.D. project was supported by the Icelandic Research Center (RANNIS) Grant 16329905

    Mutual Coupling in Phased Arrays: A Review

    Get PDF
    The mutual coupling between antenna elements affects the antenna parameters like terminal impedances, reflection coefficients and hence the antenna array performance in terms of radiation characteristics, output signal-to-interference noise ratio (SINR), and radar cross section (RCS). This coupling effect is also known to directly or indirectly influence the steady state and transient response, the resolution capability, interference rejection, and direction-of-arrival (DOA) estimation competence of the array. Researchers have proposed several techniques and designs for optimal performance of phased array in a given signal environment, counteracting the coupling effect. This paper presents a comprehensive review of the methods that model and mitigate the mutual coupling effect for different types of arrays. The parameters that get affected due to the presence of coupling thereby degrading the array performance are discussed. The techniques for optimization of the antenna characteristics in the presence of coupling are also included
    corecore