A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Active fault tolerant control for nonlinear systems with simultaneous actuator and sensor faults

The goal of this paper is to describe a novel fault tolerant tracking control (FTTC) strategy based on robust fault estimation and compensation of simultaneous actuator and sensor faults. Within the framework of fault tolerant control (FTC) the challenge is to develop an FTTC design strategy for nonlinear systems to tolerate simultaneous actuator and sensor faults that have bounded first time derivatives. The main contribution of this paper is the proposal of a new architecture based on a combination of actuator and sensor Takagi-Sugeno (T-S) proportional state estimators augmented with proportional and integral feedback (PPI) fault estimators together with a T-S dynamic output feedback control (TSDOFC) capable of time-varying reference tracking. Within this architecture the design freedom for each of the T-S estimators and the control system are available separately with an important consequence on robust L₂ norm fault estimation and robust L₂ norm closed-loop tracking performance. The FTTC strategy is illustrated using a nonlinear inverted pendulum example with time-varying tracking of a moving linear position reference. Keyword

Simultaneous Parameters Identification and State Estimation based on Unknown Input Observer for a class of LPV Systems

International audienceA novel unknown input observer structure for parameters and state estimation is proposed to enhance the performance of the estimator. In this paper, we suggest how a failed matching condition in a nonlinear unknown input observer can be recovered by using time delayed measurement to solve the inversing problem. Based on delayed outputs, an augmented system is constructed from which the parameters of the model and the system states can be simultaneously estimated. The augmented nonlinear model is transformed into a Takagi Sugeno (TS) form. Sufficient conditions for the existence of the estimator are given in terms of linear matrix inequalities (LMIs). Using the obtained information on the unknown input observer, unknown parameters are identified. Finally, the feasibility and the effectiveness of the suggested approach is demonstrated on examples

Contribution à la commande des systèmes non linéaires : application à la machine synchrone à réluctance variable

N ombreux sont les problèmes en ingénierie nécessite l’estimation de l’état d’un système via un observateur. Cependant, la modélisation et la synthèse de l’observateur deviennent des taches difficiles pour des systèmes non linéaires. Face à ces difficultés, l’approche multimodèle peut être mise à profit. Les travaux de recherche présentés dans cette thèse portent sur l’estimation d’état des systèmes non linéaires représentés par des multimodèles flous de type Takagi-Sugeno couplé. Cette représentation est obtenue grâce à l’utilisation de la décomposition en secteurs non linéaire qui nous permettant de réécrire le nouveau système sous forme de polytopes sans perte d’information. Cette forme est ensuite utile pour la synthèse d’un observateur robuste vis-à-vis des entrées inconnues afin de reconstruire les états du système et les entrées inconnues. Après une brève introduction à l’approche multimodèle, le problème de l’estimation d’état des systèmes non linéaires décrits par les multimodèles flous couplés est abordé. Ensuite, nous présentons des algorithmes pour synthétiser des observateurs d’état robustes face à des entrées inconnues. Nous avons utilisé deux types d’observateurs à gains proportionnel-intégral et à gains multi-intégral. Finalement, nous appliquons ces approches au modèle d’une machine synchrone à réluctance variable

The predictive functional control and the management of constraints in GUANAY II autonomous underwater vehicle actuators

Autonomous underwater vehicle control has been a topic of research in the last decades. The challenges addressed vary depending on each research group's interests. In this paper, we focus on the predictive functional control (PFC), which is a control strategy that is easy to understand, install, tune, and optimize. PFC is being developed and applied in industrial applications, such as distillation, reactors, and furnaces. This paper presents the rst application of the PFC in autonomous underwater vehicles, as well as the simulation results of PFC, fuzzy, and gain scheduling controllers. Through simulations and navigation tests at sea, which successfully validate the performance of PFC strategy in motion control of autonomous underwater vehicles, PFC performance is compared with other control techniques such as fuzzy and gain scheduling control. The experimental tests presented here offer effective results concerning control objectives in high and intermediate levels of control. In high-level point, stabilization and path following scenarios are proven. In the intermediate levels, the results show that position and speed behaviors are improved using the PFC controller, which offers the smoothest behavior. The simulation depicting predictive functional control was the most effective regarding constraints management and control rate change in the Guanay II underwater vehicle actuator. The industry has not embraced the development of control theories for industrial systems because of the high investment in experts required to implement each technique successfully. However, this paper on the functional predictive control strategy evidences its easy implementation in several applications, making it a viable option for the industry given the short time needed to learn, implement, and operate, decreasing impact on the business and increasing immediacy.Peer ReviewedPostprint (author's final draft

Precision Control of a Sensorless Brushless Direct Current Motor System

Sensorless control strategies were first suggested well over a decade ago with the aim of reducing the size, weight and unit cost of electrically actuated servo systems. The resulting algorithms have been successfully applied to the induction and synchronous motor families in applications where control of armature speeds above approximately one hundred revolutions per minute is desired. However, sensorless position control remains problematic. This thesis provides an in depth investigation into sensorless motor control strategies for high precision motion control applications. Specifically, methods of achieving control of position and very low speed thresholds are investigated. The developed grey box identification techniques are shown to perform better than their traditional white or black box counterparts. Further, fuzzy model based sliding mode control is implemented and results demonstrate its improved robustness to certain classes of disturbance. Attempts to reject uncertainty within the developed models using the sliding mode are discussed. Novel controllers, which enhance the performance of the sliding mode are presented. Finally, algorithms that achieve control without a primary feedback sensor are successfully demonstrated. Sensorless position control is achieved with resolutions equivalent to those of existing stepper motor technology. The successful control of armature speeds below sixty revolutions per minute is achieved and problems typically associated with motor starting are circumvented.Research Instruments Ltd

Measurements, Models, Systems and Design

531 s.

Development of the PD/PI Extended State Observer to Detect Sensor and Actuator Faults Simultaneously

This paper discusses about an observer based faultdetection scheme to detect sensor and actuator faultssimultaneously in LTI system. The proposed strategy is to addderivative action on the extended state observer (ESO) in additionto proportional-integral action, so that the structure of theproposed observer is PD/PI or called PD/PI-ESO. The derivativeaction is performed both in state estimation and fault estimation.This is to achieve fast state estimation as well as fast faultestimation. Furthermore, the effects of disturbance are attenuatedby using the H performance approach. The observer gains arethen determined based on Linear Matrix Inequalities (LMI)technique. Simulation results of a DC motor speed control systemare presented to illustrate the effectiveness of the proposed method

Sensor fault diagnosis of singular delayed LPV systems with inexact parameters: an uncertain system approach

In this paper, sensor fault diagnosis of a singular delayed linear parameter varying (LPV) system is considered. In the considered system, the model matrices are dependent on some parameters which are real-time measurable. The case of inexact parameter measurements is considered which is close to real situations. Fault diagnosis in this system is achieved via fault estimation. For this purpose, an augmented system is created by including sensor faults as additional system states. Then, an unknown input observer (UIO) is designed which estimates both the system states and the faults in the presence of measurement noise, disturbances and uncertainty induced by inexact measured parameters. Error dynamics and the original system constitute an uncertain system due to inconsistencies between real and measured values of the parameters. Then, the robust estimation of the system states and the faults are achieved with H8 performance and formulated with a set of linear matrix inequalities (LMIs). The designed UIO is also applicable for fault diagnosis of singular delayed LPV systems with unmeasurable scheduling variables. The efficiency of the proposed approach is illustrated with an example.Peer ReviewedPostprint (author's final draft