Iterative Joint Channel Estimation and Symbol Detection for Multi-User MIMO OFDM

Multiple-Input-Multiple-Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) systems have recently attracted substantial research interest. However, compared to Single-Input-Single-Output (SISO) systems, channel estimation in the MIMO scenario becomes more challenging, owing to the increased number of independent transmitter-receiver links to be estimated. In the context of the Bell LAyered Space-Time architecture (BLAST) or Space Division Multiple Access (SDMA) multi-user MIMO OFDM literature, no channel estimation technique allows the number of users to be higher than the number of receiver antennas, which is often referred to as an “overloaded” scenario. In this contribution we propose a new Genetic Algorithm (GA) assisted iterative joint channel estimation and multiuser detection approach for MIMO SDMA-OFDM systems, which exhibits a robust performance in the above-mentioned overloaded scenario. Furthermore, GA-aided Multi-User Detection (MUD) techniques found in the literature can only provide a hard-decision output, while the proposed GA is capable of providing “soft” outputs, hence achieving an improved performance with the aid of channel decoders. Finally, a range of simulation results are provided to demonstrate the superiority of the proposed scheme

EXIT chart analysis for turbo LDS-OFDM receivers

In this paper, the mutual information transfer characteristics of turbo Multiuser Detector (MUD) for a novel air interface scheme, called Low Density Signature Orthogonal Frequency Division Multiplexing (LDS-OFDM) are investigated using Extrinsic Information Transfer (EXIT) charts. LDS-OFDM uses Low Density Signature structure for spreading the data symbols in frequency domain. This technique benefits from frequency diversity besides its ability of supporting parallel data streams more than the number of subcarriers (overloaded condition). The turbo MUD couples the data symbols' detector of LDS scheme with users' FEC (Forward Error Correction) decoders through the message passing principle. The effect of overloading on LDS scheme's performance is evaluated using EXIT chart. The results show that at Eb/N0 as low as 0.3, LDS-OFDM can support loads up to 300%

Iterative Detection for Overloaded Multiuser MIMO OFDM Systems

Inspired by multiuser detection (MUD) and the ‘Turbo principle’, this thesis deals with iterative interference cancellation (IIC) in overloaded multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. Linear detection schemes, such as zero forcing (ZF) and minimum mean square error (MMSE) cannot be used for the overloaded system because of the rank deficiency of channel matrix, while the optimal approach, the maximum likelihood (ML) detection has high computational complexity. In this thesis, an iterative interference cancellation (IIC) multiuser detection scheme with matched filter and convolutional codes is considered. The main idea of this combination is a low complexity receiver. Parallel interference cancellation (PIC) is employed to improve the multiuser receiver performance for overloaded systems. A log-likelihood ratio (LLR) converter is proposed to further improve the reliability of the soft value converted from the output of the matched filter. Simulation results show that the bit error rate (BER) performance of this method is close to the optimal approach for a two user system. However, for the four user or more user system, it has an error floor of the BER performance. For this case, a channel selection scheme is proposed to distinguish whether the channel is good or bad by using the mutual information based on the extrinsic information transfer (EXIT) chart. The mutual information can be predicted in a look-up table which greatly reduces the complexity. For those ‘bad’ channels identified by the channel selection, we introduce two adaptive transmission methods to deal with such channels: one uses a lower code rate, and the other is multiple transmissions. The use of an IIC receiver with the interleave-division multiple access (IDMA) to further improve the BER performance without any channel selection is also investigated. It has been shown that this approach can remove the error floor. Finally, the influence of channel accuracy on the IIC is investigated. Pilot-based Wiener filter channel estimation is used to test and verify how much the IIC is influenced by the channel accuracy

Performance of turbo multi-user detectors in space-time coded DS-CDMA systems

Includes bibliographical references (leaves 118-123).In this thesis we address the problem of improving the uplink capacity and the performance of a DS-CDMA system by combining MUD and turbo decoding. These two are combined following the turbo principle. Depending on the concatenation scheme used, we divide these receivers into the Partitioned Approach (PA) and the Iterative Approach (IA) receivers. To enable the iterative exchange of information, these receivers employ a Parallel Interference Cancellation (PIC) detector as the first receiver stage

Coherent receiver design and analysis for interleaved division multiple access (IDMA)

This thesis discusses a new multiuser detection technique for cellular wireless communications. Multiuser communications is critical in cellular systems as multiple terminals (users) transmit to base stations (or wireless infrastructure). Efficient receiver methods are needed to maximise the performance of these links and maximise overall throughput and coverage while minimising inter-cell interference. Recently a new technique, Interleave-Division Multiple Access (IDMA), was developed as a variant of direct-sequence code division multiple access (DS-CDMA). In this new scheme users are separated by user specific interleavers, and each user is allocated a low rate code. As a result, the bandwidth expansion is devoted to the low rate code and not weaker spreading codes. IDMA has shown to have significant performance gains over traditional DS-CDMA with a modest increase in complexity. The literature on IDMA primarily focuses on the design of low rate forward error correcting (FEC) codes, as well as channel estimation. However, the practical aspects of an IDMA receiver such as timing acquisition, tracking, block asynchronous detection, and cellular analysis are rarely studied. The objective of this thesis is to design and analyse practical synchronisation, detection and power optimisation techniques for IDMA systems. It also, for the first time, provides a novel analysis and design of a multi-cell system employing a general multiuser receiver. These tools can be used to optimise and evaluate the performance of an IDMA communication system. The techniques presented in this work can be easily employed for DS-CDMA or other multiuser receiver designs with slight modification. Acquisition and synchronisation are essential processes that a base-station is required to perform before user's data can be detected and decoded. For high capacity IDMA systems, which can be heavily loaded and operate close to the channel capacity, the performance of acquisition and tracking can be severely affected by multiple access interference as well as severe drift. This thesis develops acquisition and synchronisation algorithms which can cope with heavy multiple access interference as well as high levels of drift. Once the timing points have been estimated for an IDMA receiver the detection and decoding process can proceed. An important issue with uplink systems is the alignment of frame boundaries for efficient detection. This thesis demonstrates how a fully asynchronous system can be modelled for detection. This thesis presents a model for the frame asynchronous IDMA system, and then develops a maximum likelihood receiver for the proposed system. This thesis develops tools to analyse and optimise IDMA receivers. The tools developed are general enough to be applied to other multiuser receiver techniques. The conventional EXIT chart analysis of unequal power allocated multiuser systems use an averaged EXIT chart analysis for all users to reduce the complexity of the task. This thesis presents a multidimensional analysis for power allocated IDMA, and shows how it can be utilised in power optimisation. Finally, this work develops a novel power zoning technique for multicell multiuser receivers using the optimised power levels, and illustrates a particular example where there is a 50% capacity improvement using the proposed scheme. -- provided by Candidate

Symbol by Symbol Soft-Input Soft-Output Multiuser Detection for Frequency Selective Mimo Channels

We introduce a symbol by symbol, soft-input soft-output (SISO) multiuser detector for frequency selective multiple-input multiple-output (MIMO) channels. The basic principle of this algorithm is to extract a posteriori probabilities (APPs) of all interfering symbols at each symbol interval and then feed these updated APPs as a priori probabilities (apPs) for joint APP extraction in the next symbol interval. Unlike nearoptimal block oriented sphere decoding (SD) and soft decision equalization (SDE), the computational complexity of this updating APP (UA) algorithm is linear in the number of symbols but the exponential computational load of optimal joint APP extraction makes the basic UA impractical. To decrease computations we replace the optimal joint APP extractor by a groupwise SISO multiuser detector with a soft sphere decoding core. The resulting reduced complexity updating APP (RCUA) equalizer is flexible in different situations and outperforms the traditional sub-optimal MMSE-DFE without increasing the computational costs substantially

Fast Decoder for Overloaded Uniquely Decodable Synchronous CDMA

We consider the problem of designing a fast decoder for antipodal uniquely decodable (errorless) code sets for overloaded synchronous code-division multiple access (CDMA) systems where the number of signals K_{max}^a is the largest known for the given code length L. The proposed decoder is designed in a such a way that the users can uniquely recover the information bits with a very simple decoder, which uses only a few comparisons. Compared to maximum-likelihood (ML) decoder, which has a high computational complexity for even moderate code length, the proposed decoder has a much lower computational complexity. Simulation results in terms of bit error rate (BER) demonstrate that the performance of the proposed decoder only has a 1-2 dB degradation at BER of 10^{-3} when compared to ML

Optimisation of Iterative Multi-user Receivers using Analytical Tools

The objective of this thesis is to develop tools for the analysis and optimization of an iterative receiver. These tools can be applied to most soft-in soft-out (SISO) receiver components. For illustration purposes we consider a multi-user DS-CDMA system with forward error correction that employs iterative multi-user detection based on soft interference cancellation and single user decoding. Optimized power levels combined with adaptive scheduling allows for efficient utilization of receiver resources for heavily loaded systems.¶ Metric transfer analysis has been shown to be an accurate method of predicting the convergence behavior of iterative receivers. EXtrinsic Information (EXIT), fidelity (FT) and variance (VT) transfer analysis are well-known methods, however the relationship between the different approaches has not been explored in detail. We compare the metrics numerically and analytically and derive functions to closely approximate the relationship between them. The result allows for easy translation between EXIT, FT and VT methods. Furthermore, we extend the $J$ function, which describes mutual information as a function of variance, to fidelity and symbol error variance, the Rayleigh fading channel model and a channel estimate. ...