13,617 research outputs found
Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review
Advances in reflectarrays and array lenses with electronic beam-forming
capabilities are enabling a host of new possibilities for these
high-performance, low-cost antenna architectures. This paper reviews enabling
technologies and topologies of reconfigurable reflectarray and array lens
designs, and surveys a range of experimental implementations and achievements
that have been made in this area in recent years. The paper describes the
fundamental design approaches employed in realizing reconfigurable designs, and
explores advanced capabilities of these nascent architectures, such as
multi-band operation, polarization manipulation, frequency agility, and
amplification. Finally, the paper concludes by discussing future challenges and
possibilities for these antennas.Comment: 16 pages, 12 figure
Ring Resonators with Sagnac Loops for Photonic Processing in DWDM Backbone Networks
In this paper, optical configurations based on ring resonators (RR) with an internal Sagnac (SG) loop in the feedback path, are analyzed in terms of their amplitude response and dispersive properties for filtering and chromatic dispersion managing in digital transmission systems over amplified single- mode fiber (SMF) spans in DWDM backbone networks. Design issues for the architecture as regards quadratic dispersion and magnitude distortion are provided. The RR+SG compound filter provides frequency tunability of the amplitude and dispersion peaks by adjusting a coupling coefficient of an optical coupler, with no need for using integrated thermo-optic nor current- injection based phase shifters. The configuration can be employed as an additional structure for a general RR-based design and synthesis architecture, allowing bandwidth increase of dispersion compensators and flexibility. The performance of a compound filter consisting of a two RR in series stage and a RR+SG filter are reported as a more compact and effective solution for existing multi-channel SMF backbone links operating at high bit rates. Design guidelines of an integrated ring resonator based on polymer technology for showing feasibility of the proposal is reported.This work was partially supported by Spanish CICYT (TEC2006-13273-C03-03-MIC), European project NoE
EPhoton/One+, CAM (FACTOTEM-CM:S-0505/ESP/000417), FENIS-CCG06-UC3MITIC-0619.Publicad
Segmented optical transmitter comprising a CMOS driver array and an InP IQ-MZM for advanced modulation formats
Segmented Mach-Zehnder modulators are promising solutions to generate complex modulation schemes in the migration towards optical links with a higher-spectral efficiency. We present an optical transmitter comprising a segmented-electrode InP IQ-MZM, capable of multilevel optical signal generation (5-bit per I/Q arm) by employing direct digital drive from integrated, low-power (1W) CMOS binary drivers. We discuss the advantages and design tradeoffs of the segmented driver structure and the implementation in a 40 nm CMOS technology. Multilevel operation with combined phase and amplitude modulation is demonstrated experimentally on a single MZM of the device for 2-ASK-2PSK and 4-ASK-2-PSK, showing potential for respectively 16-QAM and 64-QAM modulation in future assemblies
Current-Mode Techniques for the Implementation of Continuous- and Discrete-Time Cellular Neural Networks
This paper presents a unified, comprehensive approach
to the design of continuous-time (CT) and discrete-time
(DT) cellular neural networks (CNN) using CMOS current-mode
analog techniques. The net input signals are currents instead
of voltages as presented in previous approaches, thus avoiding
the need for current-to-voltage dedicated interfaces in image
processing tasks with photosensor devices. Outputs may be either
currents or voltages. Cell design relies on exploitation of current
mirror properties for the efficient implementation of both linear
and nonlinear analog operators. These cells are simpler and
easier to design than those found in previously reported CT
and DT-CNN devices. Basic design issues are covered, together
with discussions on the influence of nonidealities and advanced
circuit design issues as well as design for manufacturability
considerations associated with statistical analysis. Three prototypes
have been designed for l.6-pm n-well CMOS technologies.
One is discrete-time and can be reconfigured via local logic for
noise removal, feature extraction (borders and edges), shadow
detection, hole filling, and connected component detection (CCD)
on a rectangular grid with unity neighborhood radius. The other
two prototypes are continuous-time and fixed template: one for
CCD and other for noise removal. Experimental results are given
illustrating performance of these prototypes
A Scalable 6-to-18 GHz Concurrent Dual-Band Quad-Beam Phased-Array Receiver in CMOS
This paper reports a 6-to-18 GHz integrated phased- array receiver implemented in 130-nm CMOS. The receiver is easily scalable to build a very large-scale phased-array system. It concurrently forms four independent beams at two different frequencies from 6 to 18 GHz. The nominal conversion gain of the receiver ranges from 16 to 24 dB over the entire band while the worst-case cross-band and cross-polarization rejections are achieved 48 dB and 63 dB, respectively. Phase shifting is performed in the LO path by a digital phase rotator with the worst-case RMS phase error and amplitude variation of 0.5° and 0.4 dB, respectively, over the entire band. A four-element phased-array receiver system is implemented based on four receiver chips. The measured array patterns agree well with the theoretical ones with a peak-to-null ratio of over 21.5 dB
Discretization effects of digital control of thermally tunable 2x2 MZI couplers
We describe how digital voltage driving of tunable 2Ă2 Mach-Zehnder couplers with thermo-optic phase shifters introduces discretization errors which significantly affect programmable photonic circuits. Performing quantitative analysis, we show that proper biasing of couplers and simultaneous driving of arms can improve discretization errors
MEMS-reconfigurable metamaterials and antenna applications
This paper reviews some of our contributions to reconfigurable metamaterials,
where dynamic control is enabled by micro-electro-mechanical systems (MEMS)
technology. First, we show reconfigurable composite right/left handed
transmission lines (CRLH-TLs) having state of the art phase velocity variation
and loss, thereby enabling efficient reconfigurable phase shifters and
leaky-wave antennas (LWA). Second, we present very low loss metasurface designs
with reconfigurable reflection properties, applicable in reflectarrays and
partially reflective surface (PRS) antennas. All the presented devices have
been fabricated and experimentally validated. They operate in X- and Ku-bands.Comment: 8 pages; 8 figures; International Journal of Antennas and Propagatio
- âŠ