19 research outputs found

    A Low-Complexity Decision Feedforward Equalizer Architecture for High-Speed Receivers on Highly Dispersive Channels

    Get PDF
    This paper presents an improved decision feedforward equalizer (DFFE) for high speed receivers in the presence of highly dispersive channels. This decision-aided equalizer technique has been recently proposed for multigigabit communication receivers, where the use of parallel processing is mandatory. Well-known parallel architectures for the typical decision feedback equalizer (DFE) have a complexity that grows exponentially with the channel memory. Instead, the new DFFE avoids that exponential increase in complexity by using tentative decisions to cancel iteratively the intersymbol interference (ISI). Here, we demostrate that the DFFE not only allows to obtain a similar performance to the typical DFE but it also reduces the compelxity in channels with large memory. Additionally, we propose a theoretical approximation for the error probability in each iteration. In fact, when the number of iteration increases, the error probability in the DFFE tends to approach the DFE. These benefits make the DFFE an excellent choice for the next generation of high-speed receivers.Fil: Pola, Ariel Luis. Universidad Nacional de Cordoba. Facultad de Cs.exactas Fisicas y Naturales. Departamento de Electronica. Laboratorio de Comunicaciones; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Cousseau, Juan Edmundo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Instituto de Investigación En Ingeniería Eléctrica; Argentina. Universidad Nacional del Sur; ArgentinaFil: Agazzi, Oscar E.. Irvine Center Drive. ClariPhy Communications; Estados UnidosFil: Hueda, Mario Rafael. Universidad Nacional de Cordoba. Facultad de Cs.exactas Fisicas y Naturales. Departamento de Electronica. Laboratorio de Comunicaciones; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

    FPGA implementation of a MIMO DFE in 40 GB/S DQPSK optical links

    Get PDF
    In this paper, an FPGA implementation of a Multi Input Multi Output (MIMO) Decision Feedback equalizer (DFE) is proposed, for the electronic compensation of the impairments in 40Gb/s Intensity Modulated Direct Detection (IM/DD) optical communication links employing NRZ DQPSK signaling. The proposed equalizer is used for the electronic compensation the residual Chromatic Dispersion (CD) along the installed optically compensated optical paths. The required processing rate is achieved by applying intensive pipelining and parallelism in the original architecture of the equalizer. At the given processing rate, a 8-input 2-output DFE involving three taps feedforward filtering and two taps backward filtering is implemented on a single, cutting edge technology, Xilinx FPGA device

    Efficient FPGA implementations of volterra DFES for optical systems

    Get PDF
    In this work suitable architectures and high-throughput FPGA implementations of Volterra Decision Feedback Equalizers (VDFEs) for optical communication links are presented. Two VDFE configurations were selected based on the available resources of the employed FPGA devices, and two multiplexer-based architectures were developed for each of them in order to achieve the target throughput. The comparison of the experimental results with respect to different VDFE configurations, throughput, and FPGA devices points out the platform-specific design characteristics. The introduced architectures meet the desired 10Gb/s throughput, so it is demonstrated that the FPGA is a suitable platform for high-speed optical fiber communication systems

    A 10-Gb/s two-dimensional eye-opening monitor in 0.13-ÎŒm standard CMOS

    Get PDF
    An eye-opening monitor (EOM) architecture that can capture a two-dimensional (2-D) map of the eye diagram of a high-speed data signal has been developed. Two single-quadrant phase rotators and one digital-to-analog converter (DAC) are used to generate rectangular masks with variable sizes and aspect ratios. Each mask is overlapped with the received eye diagram and the number of signal transitions inside the mask is recorded as error. The combination of rectangular masks with the same error creates error contours that overall provide a 2-D map of the eye. The authors have implemented a prototype circuit in 0.13-ÎŒm standard CMOS technology that operates up to 12.5 Gb/s at 1.2-V supply. The EOM maps the input eye to a 2-D error diagram with up to 68-dB mask error dynamic range. The left and right halves of the eyes are monitored separately to capture horizontally asymmetric eyes. The chip consumes 330 mW and operates reliably with supply voltages as low as 1 V at 10 Gb/s. The authors also present a detailed analysis that verifies if the measurements are in good agreement with the expected results

    Modeling and Design of Architectures for High-Speed ADC-Based Serial Links

    Get PDF
    There is an ongoing dramatic rise in the volume of internet traffic. Standards such as 56Gb/s OIF very short reach (VSR), medium reach (MR) and long reach (LR) standards for chip to chip communication over channels with up to 10dB, 20dB and 30dB insertion loss at the PAM 4 Nyquist frequency, respectively, are being adopted. These standards call for the spectrally efficient PAM-4 signaling over NRZ signaling. PAM-4 signaling offers challenges such as a reduced SNR at the receiver, susceptibility to nonlinearities and increased sensitivity to residual ISI. Equalization provided by traditional mixed signal architectures can be insufficient to achieve the target BER requirements for very long reach channels. ADC-based receiver architectures for PAM-4 links take advantage of the more powerful equalization techniques, which lend themselves to easier and robust digital implementations, to extend the amount of insertion loss that the receiver can handle. However, ADC-based receivers can consume more power compared to mixed-signal implementations. Techniques that model the receiver performance to understand the various system trade-offs are necessary. This research presents a fast and accurate hybrid modeling framework to efficiently investigate system trade-offs for an ADC-based receiver. The key contribution being the addition of ADC related non-idealities such as quantization noise in the presence of integral and differential nonlinearities, and time-interleaving mismatch errors such as gain mismatch, bandwidth mismatch, offset mismatch and sampling skew. The research also presents a 52Gb/s ADC-based PAM-4 receiver prototype employing a 32-way time-interleaved, 2-bit/stage, 6-bit SAR ADC and a DSP with a 12-tap FFE and a 2-tap DFE. A new DFE architecture that reduces the complexity of a PAM-4 DFE to that of an NRZ DFE while simultaneously nearly doubling the maximum achievable data rate is presented. The receiver architecture also includes an analog front-end (AFE) consisting of a programmable two stage CTLE. A digital baud-rate CDR’s utilizing a Mueller-Muller phase detector sets the sampling phase. Measurement results show that for 32Gb/s operation a BER < 10⁻âč is achieved for a 30dB loss channel while for 52 Gb/s operation achieves a BER < 10⁻⁶ for a 31dB loss channel with a power efficiency of 8.06pj/bit

    Digital Signal Processing on FPGA for Short-Range Optical Communications Systems over Plastic Optical Fiber

    Get PDF
    Nowadays bandwidth requirements are increasing vertiginously. As new ways and concepts of how to share information emerge, new ways of how to access the web enter the market. Computers and mobile devices are only the beginning, the spectrum of web products and services such as IPTV, VoIP, on-line gaming, etc has been augmented by the possibility to share, store data, interact and work on the Cloud. The rush for bandwidth has led researchers from all over the world to enquire themselves on how to achieve higher data rates, and it is thanks to their efforts, that both long-haul and short-range communications systems have experienced a huge development during the last few years. However, as the demand for higher information throughput increases traditional short-range solutions reach their lim- its. As a result, optical solutions are now migrating from long-haul to short-range communication systems. As part of this trend, plastic optical fiber (POF) systems have arisen as promising candidates for applications where traditional glass optical fibers (GOF) are unsuitable. POF systems feature a series of characteristics that make them very suitable for the market requirements. More in detail, these systems are low cost, robust, easy to handle and to install, flexible and yet tolerant to bendings. Nonetheless, these features come at the expense of a considerable higher bandwidth limitation when compared to GOF systems. This thesis is aimed to the investigate the use of digital signal processing (DSP) algorithms to overcome the bandwidth limitation in short-range optical communications system based on POF. In particular, this dissertation presents the design and development of DSP algorithms on field programmable gate arrays (FPGAs) with the ultimate purpose of implementing a fully engineered 1Gbit/s Ethernet Media Converter capable of establishing data links over 50+ meters of PMMA-SI POF using an RC-LED as transmitte

    Design Techniques for High Performance Serial Link Transceivers

    Get PDF
    Increasing data rates over electrical channels with significant frequency-dependent loss is difficult due to excessive inter-symbol interference (ISI). In order to achieve sufficient link margins at high rates, I/O system designers implement equalization in the transmitters and are motivated to consider more spectrally-efficient modulation formats relative to the common PAM-2 scheme, such as PAM-4 and duobinary. The first work, reviews when to consider PAM-4 and duobinary formats, as the modulation scheme which yields the highest system margins at a given data rate is a function of the channel loss profile, and presents a 20Gb/s triple-mode transmitter capable of efficiently implementing these three modulation schemes and three-tap feedforward equalization. A statistical link modeling tool, which models ISI, crosstalk, random noise, and timing jitter, is developed to compare the three common modulation formats operating on electrical backplane channel models. In order to improve duobinary modulation efficiency, a low-power quarter-rate duobinary precoder circuit is proposed which provides significant timing margin improvement relative to full-rate precoders. Also as serial I/O data rates scale above 10 Gb/s, crosstalk between neighboring channels degrades system bit-error rate (BER) performance. The next work presents receive-side circuitry which merges the cancellation of both near-end and far-end crosstalk (NEXT/FEXT) and can automatically adapt to different channel environments and variations in process, voltage, and temperature. NEXT cancellation is realized with a novel 3-tap FIR filter which combines two traditional FIR filter taps and a continuous-time band-pass filter IIR tap for efficient crosstalk cancellation, with all filter tap coefficients automatically determined via an ondie sign-sign least-mean-square (SS-LMS) adaptation engine. FEXT cancellation is realized by coupling the aggressor signal through a differentiator circuit whose gain is automatically adjusted with a power-detection-based adaptation loop. In conclusion, the proposed architectures in the transmitter side and receiver side together are to be good solution in the high speed I/O serial links to improve the performance by overcome the physical channel loss and adjacent channel noise as the system becomes complicated

    A 40-Gb/s Quarter-Rate SerDes Transmitter and Receiver Chipset in 65-nm CMOS

    Get PDF
    This paper presents a 40-Gb/s transmitter (TX) and receiver (RX) chipset for chip-to-chip communications in a 65-nm CMOS process. The TX implements a quarter-rate multi-multiplexer (MUX)-based four-tap feed-forward equalizer (FFE), where a charge-sharing-effect elimination technique is introduced into the 4:1 MUX to optimize its jitter performance and power efficiency. The RX employs a two-stage continuous-time linear equalizer as the analog front end and integrates a low-cost sign-based zero-forcing engine relying on edge-data correlation to automatically adjust the tap weights of the TX-FFE. By embedding low-pass filters with an adaptively adjusting bandwidth into the data-sampling path and adopting high-linearity compensating phase interpolators, the clock data recovery achieves both high jitter tolerance and low jitter generation. The fabricated TX and RX chipset delivers 40-Gb/s PRBS data at BER 16-dB loss at half-baud frequency, while consuming a total power of 370 mW

    High-Capacity Short-Range Optical Communication Links

    Get PDF
    corecore