Neuro-fuzzy chip to handle complex tasks with analog performance

This paper presents a mixed-signal neuro-fuzzy controller chip which, in terms of power consumption, input–output delay, and precision, performs as a fully analog implementation. However, it has much larger complexity than its purely analog counterparts. This combination of performance and complexity is achieved through the use of a mixed-signal architecture consisting of a programmable analog core of reduced complexity, and a strategy, and the associated mixed-signal circuitry, to cover the whole input space through the dynamic programming of this core. Since errors and delays are proportional to the reduced number of fuzzy rules included in the analog core, they are much smaller than in the case where the whole rule set is implemented by analog circuitry. Also, the area and the power consumption of the new architecture are smaller than those of its purely analog counterparts simply because most rules are implemented through programming. The Paper presents a set of building blocks associated to this architecture, and gives results for an exemplary prototype. This prototype, called multiplexing fuzzy controller (MFCON), has been realized in a CMOS 0.7 um standard technology. It has two inputs, implements 64 rules, and features 500 ns of input to output delay with 16-mW of power consumption. Results from the chip in a control application with a dc motor are also provided

Adaptive hermite-polynomial-based CMAC neural control for chaos synchronization

[[abstract]]An adaptive Hermite-polynomial-based CMAC neural control (AHCNC) system which is composed of a neural controller and a smooth compensator is proposed. The neural controller using a Hermite-polynomial-based CMAC neural network (HCNN) is main controller and the smooth compensator is designed to guarantee system stable in the Lyapunov stability theorem.[[notice]]缺頁數[[incitationindex]]EI[[conferencetype]]國際[[conferencedate]]20121130~20121202[[booktype]]電子版[[iscallforpapers]]Y[[conferencelocation]]Yunlin, Taiwa

Intelligent nonsingular terminal sliding-mode control via perturbed fuzzy neural network

[[abstract]]In this paper, an intelligent nonsingular terminal sliding-mode control (INTSMC) system, which is composed of a terminal neural controller and a robust compensator, is proposed for an unknown nonlinear system. The terminal neural controller including a perturbed fuzzy neural network (PFNN) is the main controller and the robust compensator is designed to eliminate the effect of the approximation error introduced by the PFNN upon the system stability. The PFNN is used to approximate an unknown nonlinear term of the system dynamics and perturbed asymmetric membership functions are used to handle rule uncertainties when it is hard to exactly determine the grade of membership functions. In additional, Lyapunov stability theory is used to discuss the parameter learning and system stability of the INTSMC system. Finally, the proposed INTSMC system is applied to an inverted pendulum and a voice coil motor actuator. The simulation and experimental results show that the proposed INTSMC system can achieve favorable tracking performance and is robust against parameter variations in the plant

A sensory-based adaptive walking control algorithm for variable speed biped robot gaits

A balance scheme for handling variable speed gaits was implemented on an experimental biped. The control scheme used pre-planned but adaptive motion sequences in combination with closed loop reactive control. CMAC neural networks were responsible for the adaptive control of side-to-side and front-to-back balance. The biped performance improved with neural network training. The biped was able to walk with variable speed gaits, and to change gait speeds on the fly. The slower gait speeds required statically balanced walking, while the faster speeds required dynamically balanced walking. It was not necessary to distinguish between the two balance modes within the controller. Following training, the biped was able to walk with continuous motion on flat, non-slippery surfaces at forward progression velocities in the range of 21 cm/min to 72 cm/min, with average stride lengths of 6.5 cm

Evolution of microgrids with converter-interfaced generations: Challenges and opportunities

© 2019 Elsevier Ltd Although microgrids facilitate the increased penetration of distributed generations (DGs) and improve the security of power supplies, they have some issues that need to be better understood and addressed before realising the full potential of microgrids. This paper presents a comprehensive list of challenges and opportunities supported by a literature review on the evolution of converter-based microgrids. The discussion in this paper presented with a view to establishing microgrids as distinct from the existing distribution systems. This is accomplished by, firstly, describing the challenges and benefits of using DG units in a distribution network and then those of microgrid ones. Also, the definitions, classifications and characteristics of microgrids are summarised to provide a sound basis for novice researchers to undertake ongoing research on microgrids

Development of Novel Compound Controllers to Reduce Chattering of Sliding Mode Control

The robotics and dynamic systems constantly encountered with disturbances such as micro electro mechanical systems (MEMS) gyroscope under disturbances result in mechanical coupling terms between two axes, friction forces in exoskeleton robot joints, and unmodelled dynamics of robot manipulator. Sliding mode control (SMC) is a robust controller. The main drawback of the sliding mode controller is that it produces high-frequency control signals, which leads to chattering. The research objective is to reduce chattering, improve robustness, and increase trajectory tracking of SMC. In this research, we developed controllers for three different dynamic systems: (i) MEMS, (ii) an Exoskeleton type robot, and (iii) a 2 DOF robot manipulator. We proposed three sliding mode control methods such as robust sliding mode control (RSMC), new sliding mode control (NSMC), and fractional sliding mode control (FSMC). These controllers were applied on MEMS gyroscope, Exoskeleton robot, and robot manipulator. The performance of the three proposed sliding mode controllers was compared with conventional sliding mode control (CSMC). The simulation results verified that FSMC exhibits better performance in chattering reduction, faster convergence, finite-time convergence, robustness, and trajectory tracking compared to RSMC, CSMC, and NSFC. Also, the tracking performance of NSMC was compared with CSMC experimentally, which demonstrated better performance of the NSMC controller