Magnetic racetrack memory: from physics to the cusp of applications within a decade

Racetrack memory (RTM) is a novel spintronic memory-storage technology that has the potential to overcome fundamental constraints of existing memory and storage devices. It is unique in that its core differentiating feature is the movement of data, which is composed of magnetic domain walls (DWs), by short current pulses. This enables more data to be stored per unit area compared to any other current technologies. On the one hand, RTM has the potential for mass data storage with unlimited endurance using considerably less energy than today's technologies. On the other hand, RTM promises an ultrafast nonvolatile memory competitive with static random access memory (SRAM) but with a much smaller footprint. During the last decade, the discovery of novel physical mechanisms to operate RTM has led to a major enhancement in the efficiency with which nanoscopic, chiral DWs can be manipulated. New materials and artificially atomically engineered thin-film structures have been found to increase the speed and lower the threshold current with which the data bits can be manipulated. With these recent developments, RTM has attracted the attention of the computer architecture community that has evaluated the use of RTM at various levels in the memory stack. Recent studies advocate RTM as a promising compromise between, on the one hand, power-hungry, volatile memories and, on the other hand, slow, nonvolatile storage. By optimizing the memory subsystem, significant performance improvements can be achieved, enabling a new era of cache, graphical processing units, and high capacity memory devices. In this article, we provide an overview of the major developments of RTM technology from both the physics and computer architecture perspectives over the past decade. We identify the remaining challenges and give an outlook on its future

A design methodology for robust, energy-efficient, application-aware memory systems

Memory design is a crucial component of VLSI system design from area, power and performance perspectives. To meet the increasingly challenging system specifications, architecture, circuit and device level innovations are required for existing memory technologies. Emerging memory solutions are widely explored to cater to strict budgets. This thesis presents design methodologies for custom memory design with the objective of power-performance benefits across specific applications. Taking example of STTRAM (spin transfer torque random access memory) as an emerging memory candidate, the design space is explored to find optimal energy design solution. A thorough thermal reliability study is performed to estimate detection reliability challenges and circuit solutions are proposed to ensure reliable operation. Adoption of the application-specific optimal energy solution is shown to yield considerable energy benefits in a read-heavy application called MBC (memory based computing). Circuit level customizations are studied for the volatile SRAM (static random access memory) memory, which will provide improved energy-delay product (EDP) for the same MBC application. Memory design has to be aware of upcoming challenges from not only the application nature but also from the packaging front. Taking 3D die-folding as an example, SRAM performance shift under die-folding is illustrated. Overall the thesis demonstrates how knowledge of the system and packaging can help in achieving power efficient and high performance memory design.Ph.D

Gestión de jerarquías de memoria híbridas a nivel de sistema

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadoras y Automática y de Ku Leuven, Arenberg Doctoral School, Faculty of Engineering Science, leída el 11/05/2017.In electronics and computer science, the term ‘memory’ generally refers to devices that are used to store information that we use in various appliances ranging from our PCs to all hand-held devices, smart appliances etc. Primary/main memory is used for storage systems that function at a high speed (i.e. RAM). The primary memory is often associated with addressable semiconductor memory, i.e. integrated circuits consisting of silicon-based transistors, used for example as primary memory but also other purposes in computers and other digital electronic devices. The secondary/auxiliary memory, in comparison provides program and data storage that is slower to access but offers larger capacity. Examples include external hard drives, portable flash drives, CDs, and DVDs. These devices and media must be either plugged in or inserted into a computer in order to be accessed by the system. Since secondary storage technology is not always connected to the computer, it is commonly used for backing up data. The term storage is often used to describe secondary memory. Secondary memory stores a large amount of data at lesser cost per byte than primary memory; this makes secondary storage about two orders of magnitude less expensive than primary storage. There are two main types of semiconductor memory: volatile and nonvolatile. Examples of non-volatile memory are ‘Flash’ memory (sometimes used as secondary, sometimes primary computer memory) and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs). Examples of volatile memory are primary memory (typically dynamic RAM, DRAM), and fast CPU cache memory (typically static RAM, SRAM, which is fast but energy-consuming and offer lower memory capacity per are a unit than DRAM). Non-volatile memory technologies in Si-based electronics date back to the 1990s. Flash memory is widely used in consumer electronic products such as cellphones and music players and NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. The rapid increase of leakage currents in Silicon CMOS transistors with scaling poses a big challenge for the integration of SRAM memories. There is also the case of susceptibility to read/write failure with low power schemes. As a result of this, over the past decade, there has been an extensive pooling of time, resources and effort towards developing emerging memory technologies like Resistive RAM (ReRAM/RRAM), STT-MRAM, Domain Wall Memory and Phase Change Memory(PRAM). Emerging non-volatile memory technologies promise new memories to store more data at less cost than the expensive-to build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. These new memory technologies combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the non-volatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. The research and information on these Non-Volatile Memory (NVM) technologies has matured over the last decade. These NVMs are now being explored thoroughly nowadays as viable replacements for conventional SRAM based memories even for the higher levels of the memory hierarchy. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional(3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years...En el campo de la informática, el término ‘memoria’ se refiere generalmente a dispositivos que son usados para almacenar información que posteriormente será usada en diversos dispositivos, desde computadoras personales (PC), móviles, dispositivos inteligentes, etc. La memoria principal del sistema se utiliza para almacenar los datos e instrucciones de los procesos que se encuentre en ejecución, por lo que se requiere que funcionen a alta velocidad (por ejemplo, DRAM). La memoria principal está implementada habitualmente mediante memorias semiconductoras direccionables, siendo DRAM y SRAM los principales exponentes. Por otro lado, la memoria auxiliar o secundaria proporciona almacenaje(para ficheros, por ejemplo); es más lenta pero ofrece una mayor capacidad. Ejemplos típicos de memoria secundaria son discos duros, memorias flash portables, CDs y DVDs. Debido a que estos dispositivos no necesitan estar conectados a la computadora de forma permanente, son muy utilizados para almacenar copias de seguridad. La memoria secundaria almacena una gran cantidad de datos aun coste menor por bit que la memoria principal, siendo habitualmente dos órdenes de magnitud más barata que la memoria primaria. Existen dos tipos de memorias de tipo semiconductor: volátiles y no volátiles. Ejemplos de memorias no volátiles son las memorias Flash (algunas veces usadas como memoria secundaria y otras veces como memoria principal) y memorias ROM/PROM/EPROM/EEPROM (usadas para firmware como programas de arranque). Ejemplos de memoria volátil son las memorias DRAM (RAM dinámica), actualmente la opción predominante a la hora de implementar la memoria principal, y las memorias SRAM (RAM estática) más rápida y costosa, utilizada para los diferentes niveles de cache. Las tecnologías de memorias no volátiles basadas en electrónica de silicio se remontan a la década de1990. Una variante de memoria de almacenaje por carga denominada como memoria Flash es mundialmente usada en productos electrónicos de consumo como telefonía móvil y reproductores de música mientras NAND Flash solid state disks(SSDs) están progresivamente desplazando a los dispositivos de disco duro como principal unidad de almacenamiento en computadoras portátiles, de escritorio e incluso en centros de datos. En la actualidad, hay varios factores que amenazan la actual predominancia de memorias semiconductoras basadas en cargas (capacitivas). Por un lado, se está alcanzando el límite de integración de las memorias Flash, lo que compromete su escalado en el medio plazo. Por otra parte, el fuerte incremento de las corrientes de fuga de los transistores de silicio CMOS actuales, supone un enorme desafío para la integración de memorias SRAM. Asimismo, estas memorias son cada vez más susceptibles a fallos de lectura/escritura en diseños de bajo consumo. Como resultado de estos problemas, que se agravan con cada nueva generación tecnológica, en los últimos años se han intensificado los esfuerzos para desarrollar nuevas tecnologías que reemplacen o al menos complementen a las actuales. Los transistores de efecto campo eléctrico ferroso (FeFET en sus siglas en inglés) se consideran una de las alternativas más prometedores para sustituir tanto a Flash (por su mayor densidad) como a DRAM (por su mayor velocidad), pero aún está en una fase muy inicial de su desarrollo. Hay otras tecnologías algo más maduras, en el ámbito de las memorias RAM resistivas, entre las que cabe destacar ReRAM (o RRAM), STT-RAM, Domain Wall Memory y Phase Change Memory (PRAM)...Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

Leveraging Signal Transfer Characteristics and Parasitics of Spintronic Circuits for Area and Energy-Optimized Hybrid Digital and Analog Arithmetic

While Internet of Things (IoT) sensors offer numerous benefits in diverse applications, they are limited by stringent constraints in energy, processing area and memory. These constraints are especially challenging within applications such as Compressive Sensing (CS) and Machine Learning (ML) via Deep Neural Networks (DNNs), which require dot product computations on large data sets. A solution to these challenges has been offered by the development of crossbar array architectures, enabled by recent advances in spintronic devices such as Magnetic Tunnel Junctions (MTJs). Crossbar arrays offer a compact, low-energy and in-memory approach to dot product computation in the analog domain by leveraging intrinsic signal-transfer characteristics of the embedded MTJ devices. The first phase of this dissertation research seeks to build on these benefits by optimizing resource allocation within spintronic crossbar arrays. A hardware approach to non-uniform CS is developed, which dynamically configures sampling rates by deriving necessary control signals using circuit parasitics. Next, an alternate approach to non-uniform CS based on adaptive quantization is developed, which reduces circuit area in addition to energy consumption. Adaptive quantization is then applied to DNNs by developing an architecture allowing for layer-wise quantization based on relative robustness levels. The second phase of this research focuses on extension of the analog computation paradigm by development of an operational amplifier-based arithmetic unit for generalized scalar operations. This approach allows for 95% area reduction in scalar multiplications, compared to the state-of-the-art digital alternative. Moreover, analog computation of enhanced activation functions allows for significant improvement in DNN accuracy, which can be harnessed through triple modular redundancy to yield 81.2% reduction in power at the cost of only 4% accuracy loss, compared to a larger network. Together these results substantiate promising approaches to several challenges facing the design of future IoT sensors within the targeted applications of CS and ML

Design and Code Optimization for Systems with Next-generation Racetrack Memories

With the rise of computationally expensive application domains such as machine learning, genomics, and fluids simulation, the quest for performance and energy-efficient computing has gained unprecedented momentum. The significant increase in computing and memory devices in modern systems has resulted in an unsustainable surge in energy consumption, a substantial portion of which is attributed to the memory system. The scaling of conventional memory technologies and their suitability for the next-generation system is also questionable. This has led to the emergence and rise of nonvolatile memory ( NVM ) technologies. Today, in different development stages, several NVM technologies are competing for their rapid access to the market. Racetrack memory ( RTM ) is one such nonvolatile memory technology that promises SRAM -comparable latency, reduced energy consumption, and unprecedented density compared to other technologies. However, racetrack memory ( RTM ) is sequential in nature, i.e., data in an RTM cell needs to be shifted to an access port before it can be accessed. These shift operations incur performance and energy penalties. An ideal RTM , requiring at most one shift per access, can easily outperform SRAM . However, in the worst-cast shifting scenario, RTM can be an order of magnitude slower than SRAM . This thesis presents an overview of the RTM device physics, its evolution, strengths and challenges, and its application in the memory subsystem. We develop tools that allow the programmability and modeling of RTM -based systems. For shifts minimization, we propose a set of techniques including optimal, near-optimal, and evolutionary algorithms for efficient scalar and instruction placement in RTMs . For array accesses, we explore schedule and layout transformations that eliminate the longer overhead shifts in RTMs . We present an automatic compilation framework that analyzes static control flow programs and transforms the loop traversal order and memory layout to maximize accesses to consecutive RTM locations and minimize shifts. We develop a simulation framework called RTSim that models various RTM parameters and enables accurate architectural level simulation. Finally, to demonstrate the RTM potential in non-Von-Neumann in-memory computing paradigms, we exploit its device attributes to implement logic and arithmetic operations. As a concrete use-case, we implement an entire hyperdimensional computing framework in RTM to accelerate the language recognition problem. Our evaluation shows considerable performance and energy improvements compared to conventional Von-Neumann models and state-of-the-art accelerators

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Phase Noise Analyses and Measurements in the Hybrid Memristor-CMOS Phase-Locked Loop Design and Devices Beyond Bulk CMOS

Phase-locked loop (PLLs) has been widely used in analog or mixed-signal integrated circuits. Since there is an increasing market for low noise and high speed devices, PLLs are being employed in communications. In this dissertation, we investigated phase noise, tuning range, jitter, and power performances in different architectures of PLL designs. More energy efficient devices such as memristor, graphene, transition metal di-chalcogenide (TMDC) materials and their respective transistors are introduced in the design phase-locked loop. Subsequently, we modeled phase noise of a CMOS phase-locked loop from the superposition of noises from its building blocks which comprises of a voltage-controlled oscillator, loop filter, frequency divider, phase-frequency detector, and the auxiliary input reference clock. Similarly, a linear time-invariant model that has additive noise sources in frequency domain is used to analyze the phase noise. The modeled phase noise results are further compared with the corresponding phase-locked loop designs in different n-well CMOS processes. With the scaling of CMOS technology and the increase of the electrical field, the problem of short channel effects (SCE) has become dominant, which causes decay in subthreshold slope (SS) and positive and negative shifts in the threshold voltages of nMOS and pMOS transistors, respectively. Various devices are proposed to continue extending Moore\u27s law and the roadmap in semiconductor industry. We employed tunnel field effect transistor owing to its better performance in terms of SS, leakage current, power consumption etc. Applying an appropriate bias voltage to the gate-source region of TFET causes the valence band to align with the conduction band and injecting the charge carriers. Similarly, under reverse bias, the two bands are misaligned and there is no injection of carriers. We implemented graphene TFET and MoS2 in PLL design and the results show improvements in phase noise, jitter, tuning range, and frequency of operation. In addition, the power consumption is greatly reduced due to the low supply voltage of tunnel field effect transistor

Applications in Electronics Pervading Industry, Environment and Society

This book features the manuscripts accepted for the Special Issue “Applications in Electronics Pervading Industry, Environment and Society—Sensing Systems and Pervasive Intelligence” of the MDPI journal Sensors. Most of the papers come from a selection of the best papers of the 2019 edition of the “Applications in Electronics Pervading Industry, Environment and Society” (APPLEPIES) Conference, which was held in November 2019. All these papers have been significantly enhanced with novel experimental results. The papers give an overview of the trends in research and development activities concerning the pervasive application of electronics in industry, the environment, and society. The focus of these papers is on cyber physical systems (CPS), with research proposals for new sensor acquisition and ADC (analog to digital converter) methods, high-speed communication systems, cybersecurity, big data management, and data processing including emerging machine learning techniques. Physical implementation aspects are discussed as well as the trade-off found between functional performance and hardware/system costs

새로운 메모리 기술을 기반으로 한 메모리 시스템 설계 기술

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2017. 2. 최기영.Performance and energy efficiency of modern computer systems are largely dominated by the memory system. This memory bottleneck has been exacerbated in the past few years with (1) architectural innovations for improving the efficiency of computation units (e.g., chip multiprocessors), which shift the major cause of inefficiency from processors to memory, and (2) the emergence of data-intensive applications, which demands a large capacity of main memory and an excessive amount of memory bandwidth to efficiently handle such workloads. In order to address this memory wall challenge, this dissertation aims at exploring the potential of emerging memory technologies and designing a high-performance, energy-efficient memory hierarchy that is aware of and leverages the characteristics of such new memory technologies. The first part of this dissertation focuses on energy-efficient on-chip cache design based on a new non-volatile memory technology called Spin-Transfer Torque RAM (STT-RAM). When STT-RAM is used to build on-chip caches, it provides several advantages over conventional charge-based memory (e.g., SRAM or eDRAM), such as non-volatility, lower static power, and higher density. However, simply replacing SRAM caches with STT-RAM rather increases the energy consumption because write operations of STT-RAM are slower and more energy-consuming than those of SRAM. To address this challenge, we propose four novel architectural techniques that can alleviate the impact of inefficient STT-RAM write operations on system performance and energy consumption. First, we apply STT-RAM to instruction caches (where write operations are relatively infrequent) and devise a power-gating mechanism called LASIC, which leverages the non-volatility of STT-RAM to turn off STT-RAM instruction caches inside small loops. Second, we propose lower-bits cache, which exploits the narrow bit-width characteristics of application data by caching frequent bit-flips at lower bits in a small SRAM cache. Third, we present prediction hybrid cache, an SRAM/STT-RAM hybrid cache whose block placement between SRAM and STT-RAM is determined by predicting the write intensity of each cache block with a new hardware structure called write intensity predictor. Fourth, we propose DASCA, which predicts write operations that can bypass the cache without incurring extra cache misses (called dead writes) and lets the last-level cache bypass such dead writes to reduce write energy consumption. The second part of this dissertation architects intelligent main memory and its host architecture support based on logic-enabled DRAM. Traditionally, main memory has served the sole purpose of storing data because the extra manufacturing cost of implementing rich functionality (e.g., computation) on a DRAM die was unacceptably high. However, the advent of 3D die stacking now provides a practical, cost-effective way to integrate complex logic circuits into main memory, thereby opening up the possibilities for intelligent main memory. For example, it can be utilized to implement advanced memory management features (e.g., scheduling, power management, etc.) inside memoryit can be also used to offload computation to main memory, which allows us to overcome the memory bandwidth bottleneck caused by narrow off-chip channels (commonly known as processing-in-memory or PIM). The remaining questions are what to implement inside main memory and how to integrate and expose such new features to existing systems. In order to answer these questions, we propose four system designs that utilize logic-enabled DRAM to improve system performance and energy efficiency. First, we utilize the existing logic layer of a Hybrid Memory Cube (a commercial logic-enabled DRAM product) to (1) dynamically turn off some of its off-chip links by monitoring the actual bandwidth demand and (2) integrate prefetch buffer into main memory to perform aggressive prefetching without consuming off-chip link bandwidth. Second, we propose a scalable accelerator for large-scale graph processing called Tesseract, in which graph processing computation is offloaded to specialized processors inside main memory in order to achieve memory-capacity-proportional performance. Third, we design a low-overhead PIM architecture for near-term adoption called PIM-enabled instructions, where PIM operations are interfaced as cache-coherent, virtually-addressed host processor instructions that can be executed either by the host processor or in main memory depending on the data locality. Fourth, we propose an energy-efficient PIM system called aggregation-in-memory, which can adaptively execute PIM operations at any level of the memory hierarchy and provides a fully automated compiler toolchain that transforms existing applications to use PIM operations without programmer intervention.Chapter 1 Introduction 1 1.1 Inefficiencies in the Current Memory Systems 2 1.1.1 On-Chip Caches 2 1.1.2 Main Memory 2 1.2 New Memory Technologies: Opportunities and Challenges 3 1.2.1 Energy-Efficient On-Chip Caches based on STT-RAM 3 1.2.2 Intelligent Main Memory based on Logic-Enabled DRAM 6 1.3 Dissertation Overview 9 Chapter 2 Previous Work 11 2.1 Energy-Efficient On-Chip Caches based on STT-RAM 11 2.1.1 Hybrid Caches 11 2.1.2 Volatile STT-RAM 13 2.1.3 Redundant Write Elimination 14 2.2 Intelligent Main Memory based on Logic-Enabled DRAM 15 2.2.1 PIM Architectures in the 1990s 15 2.2.2 Modern PIM Architectures based on 3D Stacking 15 2.2.3 Modern PIM Architectures on Memory Dies 17 Chapter 3 Loop-Aware Sleepy Instruction Cache 19 3.1 Architecture 20 3.1.1 Loop Cache 21 3.1.2 Loop-Aware Sleep Controller 22 3.2 Evaluation and Discussion 24 3.2.1 Simulation Environment 24 3.2.2 Energy 25 3.2.3 Performance 27 3.2.4 Sensitivity Analysis 27 3.3 Summary 28 Chapter 4 Lower-Bits Cache 29 4.1 Architecture 29 4.2 Experiments 32 4.2.1 Simulator and Cache Model 32 4.2.2 Results 33 4.3 Summary 34 Chapter 5 Prediction Hybrid Cache 35 5.1 Problem and Motivation 37 5.1.1 Problem Definition 37 5.1.2 Motivation 37 5.2 Write Intensity Predictor 38 5.2.1 Keeping Track of Trigger Instructions 39 5.2.2 Identifying Hot Trigger Instructions 40 5.2.3 Dynamic Set Sampling 41 5.2.4 Summary 42 5.3 Prediction Hybrid Cache 43 5.3.1 Need for Write Intensity Prediction 43 5.3.2 Organization 43 5.3.3 Operations 44 5.3.4 Dynamic Threshold Adjustment 45 5.4 Evaluation Methodology 48 5.4.1 Simulator Configuration 48 5.4.2 Workloads 50 5.5 Single-Core Evaluations 51 5.5.1 Energy Consumption and Speedup 51 5.5.2 Energy Breakdown 53 5.5.3 Coverage and Accuracy 54 5.5.4 Sensitivity to Write Intensity Threshold 55 5.5.5 Impact of Dynamic Set Sampling 55 5.5.6 Results for Non-Write-Intensive Workloads 56 5.6 Multicore Evaluations 57 5.7 Summary 59 Chapter 6 Dead Write Prediction Assisted STT-RAM Cache 61 6.1 Motivation 62 6.1.1 Energy Impact of Inefficient Write Operations 62 6.1.2 Limitations of Existing Approaches 63 6.1.3 Potential of Dead Writes 64 6.2 Dead Write Classification 65 6.2.1 Dead-on-Arrival Fills 65 6.2.2 Dead-Value Fills 66 6.2.3 Closing Writes 66 6.2.4 Decomposition 67 6.3 Dead Write Prediction Assisted STT-RAM Cache Architecture 68 6.3.1 Dead Write Prediction 68 6.3.2 Bidirectional Bypass 71 6.4 Evaluation Methodology 72 6.4.1 Simulation Configuration 72 6.4.2 Workloads 74 6.5 Evaluation for Single-Core Systems 75 6.5.1 Energy Consumption and Speedup 75 6.5.2 Coverage and Accuracy 78 6.5.3 Sensitivity to Signature 78 6.5.4 Sensitivity to Update Policy 80 6.5.5 Implications of Device-/Circuit-Level Techniques for Write Energy Reduction 80 6.5.6 Impact of Prefetching 80 6.6 Evaluation for Multi-Core Systems 81 6.6.1 Energy Consumption and Speedup 81 6.6.2 Application to Inclusive Caches 83 6.6.3 Application to Three-Level Cache Hierarchy 84 6.7 Summary 85 Chapter 7 Link Power Management for Hybrid Memory Cubes 87 7.1 Background and Motivation 88 7.1.1 Hybrid Memory Cube 88 7.1.2 Motivation 89 7.2 HMC Link Power Management 91 7.2.1 Link Delay Monitor 91 7.2.2 Power State Transition 94 7.2.3 Overhead 95 7.3 Two-Level Prefetching 95 7.4 Application to Multi-HMC Systems 97 7.5 Experiments 98 7.5.1 Methodology 98 7.5.2 Link Energy Consumption and Speedup 100 7.5.3 HMC Energy Consumption 102 7.5.4 Runtime Behavior of LPM 102 7.5.5 Sensitivity to Slowdown Threshold 104 7.5.6 LPM without Prefetching 104 7.5.7 Impact of Prefetching on Link Traffic 105 7.5.8 On-Chip Prefetcher Aggressiveness in 2LP 107 7.5.9 Tighter Off-Chip Bandwidth Margin 107 7.5.10 Multithreaded Workloads 108 7.5.11 Multi-HMC Systems 109 7.6 Summary 111 Chapter 8 Tesseract PIM System for Parallel Graph Processing 113 8.1 Background and Motivation 115 8.1.1 Large-Scale Graph Processing 115 8.1.2 Graph Processing on Conventional Systems 117 8.1.3 Processing-in-Memory 118 8.2 Tesseract Architecture 119 8.2.1 Overview 119 8.2.2 Remote Function Call via Message Passing 122 8.2.3 Prefetching 124 8.2.4 Programming Interface 126 8.2.5 Application Mapping 127 8.3 Evaluation Methodology 128 8.3.1 Simulation Configuration 128 8.3.2 Workloads 129 8.4 Evaluation Results 130 8.4.1 Performance 130 8.4.2 Iso-Bandwidth Comparison 133 8.4.3 Execution Time Breakdown 134 8.4.4 Prefetch Efficiency 134 8.4.5 Scalability 135 8.4.6 Effect of Higher Off-Chip Network Bandwidth 136 8.4.7 Effect of Better Graph Distribution 137 8.4.8 Energy/Power Consumption and Thermal Analysis 138 8.5 Summary 139 Chapter 9 PIM-Enabled Instructions 141 9.1 Potential of ISA Extensions as the PIM Interface 143 9.2 PIM Abstraction 145 9.2.1 Operations 145 9.2.2 Memory Model 147 9.2.3 Software Modification 148 9.3 Architecture 148 9.3.1 Overview 148 9.3.2 PEI Computation Unit (PCU) 149 9.3.3 PEI Management Unit (PMU) 150 9.3.4 Virtual Memory Support 153 9.3.5 PEI Execution 153 9.3.6 Comparison with Active Memory Operations 154 9.4 Target Applications for Case Study 155 9.4.1 Large-Scale Graph Processing 155 9.4.2 In-Memory Data Analytics 156 9.4.3 Machine Learning and Data Mining 157 9.4.4 Operation Summary 157 9.5 Evaluation Methodology 158 9.5.1 Simulation Configuration 158 9.5.2 Workloads 159 9.6 Evaluation Results 159 9.6.1 Performance 160 9.6.2 Sensitivity to Input Size 163 9.6.3 Multiprogrammed Workloads 164 9.6.4 Balanced Dispatch: Idea and Evaluation 165 9.6.5 Design Space Exploration for PCUs 165 9.6.6 Performance Overhead of the PMU 167 9.6.7 Energy, Area, and Thermal Issues 167 9.7 Summary 168 Chapter 10 Aggregation-in-Memory 171 10.1 Motivation 173 10.1.1 Rethinking PIM for Energy Efficiency 173 10.1.2 Aggregation as PIM Operations 174 10.2 Architecture 176 10.2.1 Overview 176 10.2.2 Programming Model 177 10.2.3 On-Chip Caches 177 10.2.4 Coherence and Consistency 181 10.2.5 Main Memory 181 10.2.6 Potential Generalization Opportunities 183 10.3 Compiler Support 184 10.4 Contributions over Prior Art 185 10.4.1 PIM-Enabled Instructions 185 10.4.2 Parallel Reduction in Caches 187 10.4.3 Row Buffer Locality of DRAM Writes 188 10.5 Target Applications 188 10.6 Evaluation Methodology 190 10.6.1 Simulation Configuration 190 10.6.2 Hardware Overhead 191 10.6.3 Workloads 192 10.7 Evaluation Results 192 10.7.1 Energy Consumption and Performance 192 10.7.2 Dynamic Energy Breakdown 196 10.7.3 Comparison with Aggressive Writeback 197 10.7.4 Multiprogrammed Workloads 198 10.7.5 Comparison with Intrinsic-based Code 198 10.8 Summary 199 Chapter 11 Conclusion 201 11.1 Energy-Efficient On-Chip Caches based on STT-RAM 202 11.2 Intelligent Main Memory based on Logic-Enabled DRAM 203 Bibliography 205 요약 227Docto