Design of an Auxiliary Power Distribution Network for an Electric Vehicle

This paper presents the design of an auxiliary power distribution network for an electric vehicle. Efficiency is a key element in the design for any electric vehicle and a 48Vdc distribution network will be used throughout the vehicle. The high efficiency Cuk converter has been selected as the most appropriate topology to supply the various distributed loads. To achieve the best compromise between efficiency and component sizes, a switching frequency of 100kHz is used. The results from simulations and experimental measurements are discussed and a range of proposals is also made to modify some of the existing loads to further improve efficiency

Decentralized Greedy-Based Algorithm for Smart Energy Management in Plug-in Electric Vehicle Energy Distribution Systems

Variations in electricity tariffs arising due to stochastic demand loads on the power grids have stimulated research in finding optimal charging/discharging scheduling solutions for electric vehicles (EVs). Most of the current EV scheduling solutions are either centralized, which suffer from low reliability and high complexity, while existing decentralized solutions do not facilitate the efficient scheduling of on-move EVs in large-scale networks considering a smart energy distribution system. Motivated by smart cities applications, we consider in this paper the optimal scheduling of EVs in a geographically large-scale smart energy distribution system where EVs have the flexibility of charging/discharging at spatially-deployed smart charging stations (CSs) operated by individual aggregators. In such a scenario, we define the social welfare maximization problem as the total profit of both supply and demand sides in the form of a mixed integer non-linear programming (MINLP) model. Due to the intractability, we then propose an online decentralized algorithm with low complexity which utilizes effective heuristics to forward each EV to the most profitable CS in a smart manner. Results of simulations on the IEEE 37 bus distribution network verify that the proposed algorithm improves the social welfare by about 30% on average with respect to an alternative scheduling strategy under the equal participation of EVs in charging and discharging operations. Considering the best-case performance where only EV profit maximization is concerned, our solution also achieves upto 20% improvement in flatting the final electricity load. Furthermore, the results reveal the existence of an optimal number of CSs and an optimal vehicle-to-grid penetration threshold for which the overall profit can be maximized. Our findings serve as guidelines for V2G system designers in smart city scenarios to plan a cost-effective strategy for large-scale EVs distributed energy management

Modeling and Analysis of Power Processing Systems

The feasibility of formulating a methodology for the modeling and analysis of aerospace electrical power processing systems is investigated. It is shown that a digital computer may be used in an interactive mode for the design, modeling, analysis, and comparison of power processing systems

Event-Driven Network Model for Space Mission Optimization with High-Thrust and Low-Thrust Spacecraft

Numerous high-thrust and low-thrust space propulsion technologies have been developed in the recent years with the goal of expanding space exploration capabilities; however, designing and optimizing a multi-mission campaign with both high-thrust and low-thrust propulsion options are challenging due to the coupling between logistics mission design and trajectory evaluation. Specifically, this computational burden arises because the deliverable mass fraction (i.e., final-to-initial mass ratio) and time of flight for low-thrust trajectories can can vary with the payload mass; thus, these trajectory metrics cannot be evaluated separately from the campaign-level mission design. To tackle this challenge, this paper develops a novel event-driven space logistics network optimization approach using mixed-integer linear programming for space campaign design. An example case of optimally designing a cislunar propellant supply chain to support multiple lunar surface access missions is used to demonstrate this new space logistics framework. The results are compared with an existing stochastic combinatorial formulation developed for incorporating low-thrust propulsion into space logistics design; our new approach provides superior results in terms of cost as well as utilization of the vehicle fleet. The event-driven space logistics network optimization method developed in this paper can trade off cost, time, and technology in an automated manner to optimally design space mission campaigns.Comment: 38 pages; 11 figures; Journal of Spacecraft and Rockets (Accepted); previous version presented at the AAS/AIAA Astrodynamics Specialist Conference, 201

Modeling and Simulation of Regenerative Braking Energy in DC Electric Rail Systems

Regenerative braking energy is the energy produced by a train during deceleration. When a train decelerates, the motors act as generators and produce electricity. This energy can be fed back to the third rail and consumed by other trains accelerating nearby. If there are no nearby trains, this energy is dumped as heat to avoid over voltage. Regenerative braking energy can be saved by installing energy storage systems (ESS) and reused later when it is needed. To find a suitable design, size and placement of energy storage, a good understanding of this energy is required. The aim of this paper is to model and simulate regenerative braking energy. The dc electric rail transit system model introduced in this paper includes trains, substations and rail systems

A roadmap for China to peak carbon dioxide emissions and achieve a 20% share of non-fossil fuels in primary energy by 2030

As part of its Paris Agreement commitment, China pledged to peak carbon dioxide (CO2) emissions around 2030, striving to peak earlier, and to increase the non-fossil share of primary energy to 20% by 2030. Yet by the end of 2017, China emitted 28% of the world's energy-related CO2 emissions, 76% of which were from coal use. How China can reinvent its energy economy cost-effectively while still achieving its commitments was the focus of a three-year joint research project completed in September 2016. Overall, this analysis found that if China follows a pathway in which it aggressively adopts all cost-effective energy efficiency and CO2 emission reduction technologies while also aggressively moving away from fossil fuels to renewable and other non-fossil resources, it is possible to not only meet its Paris Agreement Nationally Determined Contribution (NDC) commitments, but also to reduce its 2050 CO2 emissions to a level that is 42% below the country's 2010 CO2 emissions. While numerous barriers exist that will need to be addressed through effective policies and programs in order to realize these potential energy use and emissions reductions, there are also significant local environmental (e.g., air quality), national and global environmental (e.g., mitigation of climate change), human health, and other unquantified benefits that will be realized if this pathway is pursued in China