On the design of a high-performance adaptive router for CC-NUMA multiprocessors

Copyright © 2003 IEEEThis work presents the design and evaluation of an adaptive packet router aimed at supporting CC-NUMA traffic. We exploit a simple and efficient packet injection mechanism to avoid deadlock, which leads to a fully adaptive routing by employing only three virtual channels. In addition, we selectively use output buffers for implementing the most utilized virtual paths in order to reduce head-of-line blocking. The careful implementation of these features has resulted in a good trade off between network performance and hardware cost. The outcome of this research is a High-Performance Adaptive Router (HPAR), which adequately balances the needs of parallel applications: minimal network latency at low loads and high throughput at heavy loads. The paper includes an evaluation process in which HPAR is compared with other adaptive routers using FIFO input buffering, with or without additional virtual channels to reduce head-of-line blocking. This evaluation contemplates both the VLSI costs of each router and their performance under synthetic and real application workloads. To make the comparison fair, all the routers use the same efficient deadlock avoidance mechanism. In all the experiments, HPAR exhibited the best response among all the routers tested. The throughput gains ranged from 10 percent to 40 percent in respect to its most direct rival, which employs more hardware resources. Other results shown that HPAR achieves up to 83 percent of its theoretical maximum throughput under random traffic and up to 70 percent when running real applications. Moreover, the observed packet latencies were comparable to those exhibited by simpler routers. Therefore, HPAR can be considered as a suitable candidate to implement packet interchange in next generations of CC-NUMA multiprocessors.Valentín Puente, José-Ángel Gregorio, Ramón Beivide, and Cruz Iz

MPSoCBench : um framework para avaliação de ferramentas e metodologias para sistemas multiprocessados em chip

Orientador: Rodolfo Jardim de AzevedoTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Recentes metodologias e ferramentas de projetos de sistemas multiprocessados em chip (MPSoC) aumentam a produtividade por meio da utilização de plataformas baseadas em simuladores, antes de definir os últimos detalhes da arquitetura. No entanto, a simulação só é eficiente quando utiliza ferramentas de modelagem que suportem a descrição do comportamento do sistema em um elevado nível de abstração. A escassez de plataformas virtuais de MPSoCs que integrem hardware e software escaláveis nos motivou a desenvolver o MPSoCBench, que consiste de um conjunto escalável de MPSoCs incluindo quatro modelos de processadores (PowerPC, MIPS, SPARC e ARM), organizado em plataformas com 1, 2, 4, 8, 16, 32 e 64 núcleos, cross-compiladores, IPs, interconexões, 17 aplicações paralelas e estimativa de consumo de energia para os principais componentes (processadores, roteadores, memória principal e caches). Uma importante demanda em projetos MPSoC é atender às restrições de consumo de energia o mais cedo possível. Considerando que o desempenho do processador está diretamente relacionado ao consumo, há um crescente interesse em explorar o trade-off entre consumo de energia e desempenho, tendo em conta o domínio da aplicação alvo. Técnicas de escalabilidade dinâmica de freqüência e voltagem fundamentam-se em gerenciar o nível de tensão e frequência da CPU, permitindo que o sistema alcance apenas o desempenho suficiente para processar a carga de trabalho, reduzindo, consequentemente, o consumo de energia. Para explorar a eficiência energética e desempenho, foram adicionados recursos ao MPSoCBench, visando explorar escalabilidade dinâmica de voltaegem e frequência (DVFS) e foram validados três mecanismos com base na estimativa dinâmica de energia e taxa de uso de CPUAbstract: Recent design methodologies and tools aim at enhancing the design productivity by providing a software development platform before the definition of the final Multiprocessor System on Chip (MPSoC) architecture details. However, simulation can only be efficiently performed when using a modeling and simulation engine that supports system behavior description at a high abstraction level. The lack of MPSoC virtual platform prototyping integrating both scalable hardware and software in order to create and evaluate new methodologies and tools motivated us to develop the MPSoCBench, a scalable set of MPSoCs including four different ISAs (PowerPC, MIPS, SPARC, and ARM) organized in platforms with 1, 2, 4, 8, 16, 32, and 64 cores, cross-compilers, IPs, interconnections, 17 parallel version of software from well-known benchmarks, and power consumption estimation for main components (processors, routers, memory, and caches). An important demand in MPSoC designs is the addressing of energy consumption constraints as early as possible. Whereas processor performance comes with a high power cost, there is an increasing interest in exploring the trade-off between power and performance, taking into account the target application domain. Dynamic Voltage and Frequency Scaling techniques adaptively scale the voltage and frequency levels of the CPU allowing it to reach just enough performance to process the system workload while meeting throughput constraints, and thereby, reducing the energy consumption. To explore this wide design space for energy efficiency and performance, both for hardware and software components, we provided MPSoCBench features to explore dynamic voltage and frequency scalability (DVFS) and evaluated three mechanisms based on energy estimation and CPU usage rateDoutoradoCiência da ComputaçãoDoutora em Ciência da Computaçã

Artificial Neural Network Based Prediction Mechanism for Wireless Network on Chips Medium Access Control

As per Moore’s law, continuous improvement over silicon process technologies has made the integration of hundreds of cores on to a single chip possible. This has resulted in the paradigm shift towards multicore and many-core chips where, hundreds of cores can be integrated on the same die and interconnected using an on-chip packet-switched network called a Network-on-Chip (NoC). Various tasks running on different cores generate different rates of communication between pairs of cores. This lead to the increase in spatial and temporal variation in the workloads, which impact the long distance data communication over multi-hop wire line paths in conventional NoCs. Among different alternatives, due to the CMOS compatibility and energy-efficiency, low-latency wireless interconnects operating in the millimeter wave (mm-wave) band is nearer term solution to this multi-hop communication problem in traditional NoCs. This has led to the recent exploration of millimeter-wave (mm-wave) wireless technologies in wireless NoC architectures (WiNoC). In a WiNoC, the mm-wave wireless interconnect is realized by equipping some NoC switches with an wireless interface (WI) that contains an antenna and transceiver circuit tuned to operate in the mm-wave frequency. To enable collision free and energy-efficient communication among the WIs, the WIs is also equipped with a medium access control mechanism (MAC) unit. Due to the simplicity and low-overhead implementation, a token passing based MAC mechanism to enable Time Division Multiple Access (TDMA) has been adopted in many WiNoC architectures. However, such simple MAC mechanism is agnostic of the demand of the WIs. Based on the tasks mapped on a multicore system the demand through the WIs can vary both spatially and temporally. Hence, if the MAC is agnostic of such demand variation, energy is wasted when no flit is transferred through the wireless channel. To efficiently utilize the wireless channel, MAC mechanisms that can dynamically allocate token possession period of the WIs have been explored in recent time for WiNoCs. In the dynamic MAC mechanism, a history-based prediction is used to predict the bandwidth demand of the WIs to adjust the token possession period with respect to the traffic variation. However, such simple history based predictors are not accurate and limits the performance gain due to the dynamic MACs in a WiNoC. In this work, we investigate the design of an artificial neural network (ANN) based prediction methodology to accurately predict the bandwidth demand of each WI. Through system level simulation, we show that the dynamic MAC mechanisms enabled with the ANN based prediction mechanism can significantly improve the performance of a WiNoC in terms of peak bandwidth, packet energy and latency compared to the state-of-the-art dynamic MAC mechanisms