148 research outputs found
A Wide Band Adaptive All Digital Phase Locked Loop With Self Jitter Measurement And Calibration
The expanding growth of mobile products and services has led to various wireless communication standards that employ different spectrum bands and protocols to provide data, voice or video communication services. Software deffned radio and cognitive radio are emerging techniques that can dynamically integrate various standards to provide seamless global coverage, including global roaming across geographical regions, and interfacing with different wireless networks. In software deffned radio and cognitive radio, one of the most critical RF blocks that need to exhibit frequency agility is the phase lock loop (PLL) frequency synthesizer. In order to access various standards, the frequency synthesizer needs to have wide frequency tuning range, fast tuning speed, and low phase noise and frequency spur. The traditional analog charge pump frequency synthesizer circuit design is becoming diffcult due to the continuous down-scalings of transistor feature size and power supply voltage. The goal of this project was to develop an all digital phase locked loop (ADPLL) as the alternative solution technique in RF transceivers by taking advantage of digital circuitry\u27s characteristic features of good scalability, robustness against process variation and high noise margin. The targeted frequency bands for our ADPLL design included 880MHz-960MHz, 1.92GHz-2.17GHz, 2.3GHz-2.7GHz, 3.3GHz-3.8GHz and 5.15GHz-5.85GHz that are used by wireless communication standards such as GSM, UMTS, bluetooth, WiMAX and Wi-Fi etc.
This project started with the system level model development for characterizing ADPLL phase noise, fractional spur and locking speed. Then an on-chip jitter detector and parameter adapter was designed for ADPLL to perform self-tuning and self-calibration to accomplish high frequency purity and fast frequency locking in each frequency band. A novel wide band DCO is presented for multi-band wireless application. The proposed wide band adaptive ADPLL was implemented in the IBM 0.13µm CMOS technology. The phase noise performance, the frequency locking speed as well as the tuning range of the digitally controlled oscillator was assessed and agrees well with the theoretical analysis
A Bang-Bang All-Digital PLL for Frequency Synthesis
abstract: Phase locked loops are an integral part of any electronic system that requires a clock signal and find use in a broad range of applications such as clock and data recovery circuits for high speed serial I/O and frequency synthesizers for RF transceivers and ADCs. Traditionally, PLLs have been primarily analog in nature and since the development of the charge pump PLL, they have almost exclusively been analog. Recently, however, much research has been focused on ADPLLs because of their scalability, flexibility and higher noise immunity. This research investigates some of the latest all-digital PLL architectures and discusses the qualities and tradeoffs of each. A highly flexible and scalable all-digital PLL based frequency synthesizer is implemented in 180 nm CMOS process. This implementation makes use of a binary phase detector, also commonly called a bang-bang phase detector, which has potential of use in high-speed, sub-micron processes due to the simplicity of the phase detector which can be implemented with a simple D flip flop. Due to the nonlinearity introduced by the phase detector, there are certain performance limitations. This architecture incorporates a separate frequency control loop which can alleviate some of these limitations, such as lock range and acquisition time.Dissertation/ThesisM.S. Electrical Engineering 201
Data acquisition techniques based on frequency-encoding applied to capacitive MEMS microphones
Mención Internacional en el título de doctorThis thesis focuses on the development of capacitive sensor readout circuits
and data converters based on frequency-encoding. This research
has been motivated by the needs of consumer electronics industry, which
constantly demands more compact readout circuit for MEMS microphones
and other sensors. Nowadays, data acquisition is mainly based
on encoding signals in voltage or current domains, which is becoming
more challenging in modern deep submicron CMOS technologies.
Frequency-encoding is an emerging signal processing technique based
on encoding signals in the frequency domain. The key advantage of
this approach is that systems can be implemented using mostly-digital
circuitry, which benefits from CMOS technology scaling. Frequencyencoding
can be used to build phase referenced integrators, which can
replace classical integrators (such as switched-capacitor based integrators)
in the implementation of efficient analog-to-digital converters and
sensor interfaces. The core of the phase referenced integrators studied in
this thesis consists of the combination of different oscillator topologies
with counters and highly-digital circuitry.
This work addresses two related problems: the development of capacitive
MEMS sensor readout circuits based on frequency-encoding, and the
design and implementation of compact oscillator-based data converters
for audio applications.
In the first problem, the target is the integration of the MEMS sensor
into an oscillator circuit, making the oscillation frequency dependent on
the sensor capacitance. This way, the sound can be digitized by measuring
the oscillation frequency, using digital circuitry. However, a MEMS
microphone is a complex structure on which several parasitic effects can
influence the operation of the oscillator. This work presents a feasibility
analysis of the integration of a MEMS microphone into different oscillator
topologies. The conclusion of this study is that the parasitics of the
MEMS limit the performance of the microphone, making it inefficient.
In contrast, replacing conventional ADCs with frequency-encoding based
ADCs has proven a very efficient solution, which motivates the next
problem.
In the second problem, the focus is on the development of high-order
oscillator-based Sigma-Delta modulators. Firstly, the equivalence between classical
integrators and phase referenced integrators has been studied, followed
by an overview of state-of-art oscillator-based converters. Then,
a procedure to replace classical integrators by phase referenced integrators
is presented, including a design example of a second-order oscillator based
Sigma-Delta modulator. Subsequently, the main circuit impairments that
limit the performance of this kind of implementations, such as phase
noise, jitter or metastability, are described.
This thesis also presents a methodology to evaluate the impact of
phase noise and distortion in oscillator-based systems. The proposed
method is based on periodic steady-state analysis, which allows the rapid
estimation of the system dynamic range without resorting to transient
simulations. In addition, a novel technique to analyze the impact of
clock jitter in Sigma-Delta modulators is described.
Two integrated circuits have been implemented in 0.13 μm CMOS
technology to demonstrate the feasibility of high-order oscillator-based Sigma-Delta modulators. Both chips have been designed to feature secondorder
noise shaping using only oscillators and digital circuitry. The first
testchip shows a malfunction in the digital circuitry due to the complexity
of the multi-bit counters. The second chip, implemented using
single-bit counters for simplicity, shows second-order noise shaping and
reaches 103 dB-A of dynamic range in the audio bandwidth, occupying
only 0.04 mm2.Esta tesis se centra en el desarrollo de conversores de datos e interfaces
para sensores capacitivos basados en codificación en frecuencia. Esta
investigación está motivada por las necesidades de la industria, que constantemente
demanda reducir el tamaño de este tipo de circuitos. Hoy en
día, la adquisición de datos está basada principalmente en la codificación
de señales en tensión o en corriente. Sin embargo, la implementación
de este tipo de soluciones en tecnologías CMOS nanométricas presenta
varias dificultades.
La codificación de frecuencia es una técnica emergente en el procesado
de señales basada en codificar señales en el dominio de la frecuencia.
La principal ventaja de esta alternativa es que los sistemas pueden implementarse
usando circuitos mayoritariamente digitales, los cuales se
benefician de los avances de la tecnología CMOS. La codificación en
frecuencia puede emplearse para construir integradores referidos a la
fase, que pueden reemplazar a los integradores clásicos (como los basados
en capacidades conmutadas) en la implementación de conversores
analógico-digital e interfaces de sensores. Los integradores referidos a la
fase estudiados en esta tesis consisten en la combinación de diferentes
topologías de osciladores con contadores y circuitos principalmente digitales.
Este trabajo aborda dos cuestiones relacionadas: el desarrollo de circuitos
de lectura para sensores MEMS capacitivos basados en codificación
temporal, y el diseño e implementación de conversores de datos
compactos para aplicaciones de audio basados en osciladores.
En el primer caso, el objetivo es la integración de un sensor MEMS
en un oscilador, haciendo que la frecuencia de oscilación depe capacidad del sensor. De esta forma, el sonido puede ser digitalizado
midiendo la frecuencia de oscilación, lo cual puede realizarse usando circuitos
en su mayor parte digitales. Sin embargo, un micrófono MEMS es
una estructura compleja en la que múltiples efectos parasíticos pueden
alterar el correcto funcionamiento del oscilador. Este trabajo presenta
un análisis de la viabilidad de integrar un micrófono MEMS en diferentes
topologías de oscilador. La conclusión de este estudio es que los parasíticos
del MEMS limitan el rendimiento del micrófono, causando que esta
solución no sea eficiente. En cambio, la implementación de conversores
analógico-digitales basados en codificación en frecuencia ha demostrado
ser una alternativa muy eficiente, lo cual motiva el estudio del siguiente
problema.
La segunda cuestión está centrada en el desarrollo de moduladores Sigma-Delta de alto orden basados en osciladores. En primer lugar se ha estudiado
la equivalencia entre los integradores clásicos y los integradores
referidos a la fase, seguido de una descripción de los conversores basados
en osciladores publicados en los últimos años. A continuación se
presenta un procedimiento para reemplazar integradores clásicos por integradores
referidos a la fase, incluyendo un ejemplo de diseño de un
modulador Sigma-Delta de segundo orden basado en osciladores. Posteriormente
se describen los principales problemas que limitan el rendimiento de este
tipo de sistemas, como el ruido de fase, el jitter o la metaestabilidad.
Esta tesis también presenta un nuevo método para evaluar el impacto
del ruido de fase y de la distorsión en sistemas basados en osciladores. El
método propuesto está basado en simulaciones PSS, las cuales permiten
la rápida estimación del rango dinámico del sistema sin necesidad de
recurrir a simulaciones temporales. Además, este trabajo describe una
nueva técnica para analizar el impacto del jitter de reloj en moduladores Sigma-Delta.
En esta tesis se han implementado dos circuitos integrados en tecnología
CMOS de 0.13 μm, con el fin de demostrar la viabilidad de los
moduladores Sigma-Delta de alto orden basados en osciladores. Ambos chips han
sido diseñados para producir conformación espectral de ruido de segundo
orden, usando únicamente osciladores y circuitos mayoritariamente digitales.
El primer chip ha mostrado un error en el funcionamiento de los
circuitos digitales debido a la complejidad de las estructuras multi-bit
utilizadas. El segundo chip, implementado usando contadores de un solo
bit con el fin de simplificar el sistema, consigue conformación espectral
de ruido de segundo orden y alcanza 103 dB-A de rango dinámico en el
ancho de banda del audio, ocupando solo 0.04 mm2.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Georges G.E. Gielen.- Secretario: José Manuel de la Rosa.- Vocal: Ana Rus
Digitally programmable delay-locked-loop with adaptive charge pump current for UWB radar system
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e ComputadoresThe objective of this thesis is to study and design a digitally programmable delay locked
loop for a UWB radar sensor in 0.13 m CMOS technology.. Almost all logic systems
have a main clock signal in order to provide a common timing reference for all of the
components in the system. In certain cases it is necessary to have rising (or falling) edges
at precise time instants, different from the ones in the main clock. To create those new
timing edges at the appropriate time it is necessary to use delay circuits or delay lines.
In the case of the radar system its necessary to generate a clock signal with a variable
delay. This delay is relative to the transmit clock signal and is used to determine the
target distance. Traditionally, delay lines are realized using a cascade of delay elements
and are typically inserted into a delay-locked-loop (DLL) to guaranty that the delay is
not affected by process and temperature variations. A DLL works in a similar way to a
Phase Locked Loop (PLL).
In order to facilitate the operation of the radar system, it is important that the delay
value should be digitally programmable. To achieve a digitally programmable delay with
a large linearity (independent from matching errors), the architecture of the system is
constituted by a digital modulator that controls a 1-bit digital to time converter,
whose output will be filtered by the DLL, thus producing the delayed clock signal.
The electronic sub-blocks necessary to build this circuit are describe in detail as the
proposed architectures. These circuits are implemented using differential clock signals in
order to reduce the noise level in the radar system. Design and simulation results of the
digitally programmable DLL shows a high output jitter noise for large delays. In order to
improve this results a new architecture is proposed. Conventional DLL’s have a predefined
charge pump current. The new architecture will make the charge pump current variable.
Simulations results will show a improved jitter noise and delay error
Millimeter-Wave CMOS Digitally Controlled Oscillators for Automotive Radars
All-Digital-Phase-Locked-Loops (ADPLLs) are ideal for integrated circuit implementations and effectively generate frequency chirps for Frequency-Modulated-Continuous-Wave (FMCW) radar. This dissertation discusses the design requirements for integrated ADPLL, which is used as chirp synthesizer for FMCW automotive radar and focuses on an analysis of the ADPLL performance based on the Digitally-Controlled-Oscillator (DCO) design parameters and the ADPLL configuration. The fundamental principles of the FMCW radar are reviewed and the importance of linear DCO for reliable operation of the synthesizer is discussed. A novel DCO, which achieves linear frequency tuning steps is designed by arranging the available minimum Metal-Oxide-Metal (MoM) capacitor in unique confconfigurations. The DCO prototype fabricated in 65 nm CMOS fullls the requirements of the 77 GHz automotive radar. The resultant linear DCO characterization can effectively drive a chirp generation system in complete FMCW automotive radar synthesizer
Multi-Loop-Ring-Oscillator Design and Analysis for Sub-Micron CMOS
Ring oscillators provide a central role in timing circuits for today?s mobile devices and desktop computers. Increased integration in these devices exacerbates switching noise on the supply, necessitating improved supply resilience. Furthermore, reduced voltage headroom in submicron technologies limits the number of stacked transistors available in a delay cell. Hence, conventional single-loop oscillators offer relatively few design options to achieve desired specifications, such as supply rejection. Existing state-of-the-art supply-rejection- enhancement methods include actively regulating the supply with an LDO, employing a fully differential or current-starved delay cell, using a hi-Z voltage-to-current converter, or compensating/calibrating the delay cell. Multiloop ring oscillators (MROs) offer an additional solution because by employing a more complex ring-connection structure and associated delay cell, the designer obtains an additional degree of freedom to meet the desired specifications.
Designing these more complex multiloop structures to start reliably and achieve the desired performance requires a systematic analysis procedure, which we attack on two fronts: (1) a generalized delay-cell viewpoint of the MRO structure to assist in both analysis and circuit layout, and (2) a survey of phase-noise analysis to provide a bank of methods to analyze MRO phase noise. We distill the salient phase-noise-analysis concepts/key equations previously developed to facilitate MRO and other non-conventional oscillator analysis. Furthermore, our proposed analysis framework demonstrates that all these methods boil down to obtaining three things: (1) noise modulation function (NMF), (2) noise transfer function (NTF), and (3) current-controlled-oscillator gain (KICO).
As a case study, we detail the design, analysis, and measurement of a proposed multiloop ring oscillator structure that provides improved power-supply isolation (more than 20dB increase in supply rejection over a conventional-oscillator control case fabricated on the same test chip). Applying our general multi-loop-oscillator framework to this proposed MRO circuit leads both to design-oriented expressions for the oscillation frequency and supply rejection as well as to an efficient layout technique facilitating cross-coupling for improved quadrature accuracy and systematic, substantially simplified layout effort
Towards Very Large Scale Analog (VLSA): Synthesizable Frequency Generation Circuits.
Driven by advancement in integrated circuit design and fabrication technologies, electronic systems have become ubiquitous. This has been enabled powerful digital design tools that continue to shrink the design cost, time-to-market, and the size of digital circuits. Similarly, the manufacturing cost has been constantly declining for the last four decades due to CMOS scaling. However, analog systems have struggled to keep up with the unprecedented scaling of digital circuits. Even today, the majority of the analog circuit blocks are custom designed, do not scale well, and require long design cycles.
This thesis analyzes the factors responsible for the slow scaling of analog blocks, and presents a new design methodology that bridges the gap between traditional custom analog design and the modern digital design. The proposed methodology is utilized in implementation of the frequency generation circuits – traditionally considered analog systems. Prototypes covering two different applications were implemented. The first synthesized all-digital phase-locked loop was designed for 400-460 MHz MedRadio applications and was fabricated in a 65 nm CMOS process. The second prototype is an ultra-low power, near-threshold 187-500 kHz clock generator for energy harvesting/autonomous applications. Finally, a digitally-controlled oscillator frequency resolution enhancement technique is presented which allows reduction of quantization noise in ADPLLs without introducing spurs.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/109027/1/mufaisal_1.pd
Time-encoding analog-to-digital converters : bridging the analog gap to advanced digital CMOS? Part 2: architectures and circuits
The scaling of CMOS technology deep into the nanometer range has created challenges for the design of highperformance analog ICs: they remain large in area and power consumption in spite of process scaling. Analog circuits based on time encoding [1], [2], where the signal information is encoded in the waveform transitions instead of its amplitude, have been developed to overcome these issues. While part one of this overview article [3] presented the basic principles of time encoding, this follow-up article describes and compares the main time-encoding architectures for analog-to-digital converters (ADCs) and discusses the corresponding design challenges of the circuit blocks. The focus is on structures that avoid, as much as possible, the use of traditional analog blocks like operational amplifiers (opamps) or comparators but instead use digital circuitry, ring oscillators, flip-flops, counters, an so on. Our overview of the state of the art will show that these circuits can achieve excellent performance. The obvious benefit of this highly digital approach to realizing analog functionality is that the resulting circuits are small in area and more compatible with CMOS process scaling. The approach also allows for the easy integration of these analog functions in systems on chip operating at "digital" supply voltages as low as 1V and lower. A large part of the design process can also be embedded in a standard digital synthesis flow
Quadrature Phase-Domain ADPLL with Integrated On-line Amplitude Locked Loop Calibration for 5G Multi-band Applications
5th generation wireless systems (5G) have expanded frequency band coverage with the low-band 5G and mid-band 5G frequencies spanning 600 MHz to 4 GHz spectrum. This dissertation focuses on a microelectronic implementation of CMOS 65 nm design of an All-Digital Phase Lock Loop (ADPLL), which is a critical component for advanced 5G wireless transceivers. The ADPLL is designed to operate in the frequency bands of 600MHz-930MHz, 2.4GHz-2.8GHz and 3.4GHz-4.2GHz. Unique ADPLL sub-components include: 1) Digital Phase Frequency Detector, 2) Digital Loop Filter, 3) Channel Bank Select Circuit, and 4) Digital Control Oscillator. Integrated with the ADPLL is a 90-degree active RC-CR phase shifter with on-line amplitude locked loop (ALL) calibration to facilitate enhanced image rejection while mitigating the effects of fabrication process variations and component mismatch. A unique high-sensitivity high-speed dynamic voltage comparator is included as a key component of the active phase shifter/ALL calibration subsystem. 65nm CMOS technology circuit designs are included for the ADPLL and active phase shifter with simulation performance assessments. Phase noise results for 1 MHz offset with carrier frequencies of 600MHz, 2.4GHz, and 3.8GHz are -130, -122, and -116 dBc/Hz, respectively. Monte Carlo simulations to account for process variations/component mismatch show that the active phase shifter with ALL calibration maintains accurate quadrature phase outputs when operating within the frequency bands 600MHz-930MHz, 2.4GHz-2.8GHz and 3.4GHz-4.2GHz
- …