Transmission Improvement of UMTS and Wi-Fi Signals Through Energy Saving Glass Using FSS

The transmission of infrared (IR) and visible frequencies through modern energy-saving glass, due to etching of bandpass frequency-selective surfaces (FSSs), is analysed. Energy-saving glass panels employ a very thin layer of metallic oxide on one side of the ordinary glass. Due to the presence of this layer, IR waves are attenuated whereas visible wavelengths can pass through, providing good see-through effect. However, one drawback with such energy-saving glass panels is that they also attenuate useful radio frequency (RF)/ microwave (MW) signals such as those used for mobile (e.g. global system for mobile communication (GSM)), global positioning system (GPS) and personal communication systems, due to the resistance of metallic oxide coating. To overcome this problem, an aperture-type bandpass FSS may be etched in the glass coating to selectively improve the transmission of useful signals. However, such an FSS also leads to an increase in overall IR transmission through energy-saving glass which is unwanted. In this study the authors analyse the effect of etching an FSS on the transmission of RF/MW, IR and light waves, for two types of commercial energy-saving glass panels. For example, an FSS with 8 mm aperture designed to improve MW transmission by 20 dB (from about -30 to -10 dB) at 1.3 GHz causes an increase in overall IR transmission from 23.8% to 33.8% (10%), which may be acceptable. An FSS with a narrower (4 mm) aperture improves MW transmission by 16 dB with 6.2% increase in IR transmission. Theoretical and measured results are presented

Equivalent circuit model for coupled complementary metasurfaces

Coupled complementary metasurfaces (CCMTS) exhibit a passband whose frequency is several times lower than that of the individual metasurface (MTS) passband frequency. In this paper we explain this phenomenon and propose a simple and accurate equivalent circuit for CCMTS comprised of slots and their Babinet complement, dipoles. An equivalent circuit is extracted from a coupled EFIE-MFIE equation using a synthetic basis function. The same procedure can be conveniently applied to any CCMTS. The model allows one to estimate the large downshift of resonant frequency and the bandwidth utilizing a simple formula. When used in a subresonant regime, the unit cell may have a dimension of a tenth of a free space wavelength with a moderate value of permittivity between the complementary layers

Synthesis Technique of Thickness-Customizable Multilayered Frequency Selective Surface for Plasma-Based Electromagnetic Structures

This dissertation provides a synthesis technique for the design of thickness-customizable high-order (N ≥ 2) bandpass frequency selective surface (FSS) and its application in realizing versatile multi-layered FSS and absorbers. Admittance inverters layers are used to synthesize the transfer response of the filter given desired characteristics such as filter type, center frequency, and bandwidth. These inverter layers are essentially electromagnetic coupling interlayers that can be adjusted to customize the thickness of multilayered FSS without degrading the desired filter performance. A generalized equivalent circuit model is used to provide physical insights of the proposed design. This synthesis technique is adopted to deliver a versatile implementation capability of high-order FSS filters using various dielectric spacers with arbitrary thicknesses. Such technique enables the realization of spatial filters with variable size, while maintaining the desired filter response. To highlight the significance of the proposed synthesis technique, its concept is applied to two practical problems including the design of compact switchable FSS and adaptive/tunable microwave absorbers as it may allow simpler integration of active components that require specific physical dimensions. In the first practical problem, the feasibility of deploying plasma switchable compact spatial filter in harsh electromagnetic radiation environments is investigated. The proposed FSS integrates contained plasma (plasma-shells) as active tuning elements. These ceramic, gas-encapsulating shells are ideal for high-power microwave and electromagnetic pulse protection because they are rugged, hermetic, operable at extreme temperatures, and insensitive to ionizing radiation. A 2D periodic second-order switchable spatial filter is implemented. It is composed of electrically small Jerusalem cross structures embedded with discrete plasma shells strategically located to effectively switch the transfer function of the filter. This technique is used to realize compact low profile second order band pass spatial filter operating at S-band. It also has the ability to switch its transfer function within 20 to 100 ns while enabling in-band shielding protection for aerospace or terrestrial electromagnetic systems subjected to high power microwave energy (HPME) and high electromagnetic pulse (HEMP) in harsh space environment. Experimental results are shown to be in good agreement with simulation results. The second practical problem is addressed by deploying a large-scale adaptable compressed Jaumann absorber for harsh and dynamic electromagnetic environments. The multilayered conductor-backed absorbers are realized by integrating ceramic gas-encapsulating shells and a closely coupled resonant layer that also serves as a biasing electrode to sustain the plasma. These active frequency selective absorbers are analyzed using a transmission line approach to provide the working principle and its frequency tuning capability. By varying the voltage of the sustainer, the plasma can be modeled as a lossy, variable, frequency-power-dependent inductor, providing a dynamic tuning response of the absorption spectral band. To study the power handling capability of the tunable absorber, dielectric and air breakdowns within the device are numerically emulated using electromagnetic simulation by quantifying the maximum field enhancement factor (MFEF). Furthermore, a comprehensive thermal analysis using a simulation method that couples electromagnetics and heat transfer is performed for the absorber under high power continuous microwave excitations. The maximum power level handling capability of the microwave absorber has been numerically predicted and validated experimentally

Design and analysis of miniaturized low profile and second-order multi-band polarization selective surface for multipath communication application

In this paper, a novel frequency selective surface (FSS) is designed; it has the characteristics of the low profile, second-order, multi-band, and the remarkable polarization selection properties. In the following, such an FSS having polarization selection characteristics will be referred to simply as a polarization selection surface (PSS). In a specific frequency band, the proposed PSS has a second-order selective transmission characteristic for TE and TM waves. Based on the coupling resonance filtering mechanism, the proposed PSS is composed of three metallic layers separated by two layers of dielectric substrates, which serves as the spatial form of the second-order microwave filter. The proposed PSS uses a sub-wavelength periodic structure array consisting of a non-resonant unit, and the unit size and the period within the range of 0.08λ 1 -0.15λ 1 , where the λ 1 =40.76 mm is the first passband wavelength of free space, so the PSS miniaturization characteristic is remarkable. The theoretical analysis and measure results show that the proposed bandpass PSS has good second-order polarization selection characteristics, out-of-band suppression level, and the flat transmission band, compared with the first-order bandpass PSS. In the range of incident angle of 0°-60°, it has a stable frequency response. It provides a reference for the design of a polarization wave generator and a polarization separation structure in a multipath communication system. © 2019 IEEE

無指向性直列給電Sub-6帯基地局アンテナに関する研究

Tohoku University博士（工学）thesi

COrE (Cosmic Origins Explorer) A White Paper

COrE (Cosmic Origins Explorer) is a fourth-generation full-sky, microwave-band satellite recently proposed to ESA within Cosmic Vision 2015-2025. COrE will provide maps of the microwave sky in polarization and temperature in 15 frequency bands, ranging from 45 GHz to 795 GHz, with an angular resolution ranging from 23 arcmin (45 GHz) and 1.3 arcmin (795 GHz) and sensitivities roughly 10 to 30 times better than PLANCK (depending on the frequency channel). The COrE mission will lead to breakthrough science in a wide range of areas, ranging from primordial cosmology to galactic and extragalactic science. COrE is designed to detect the primordial gravitational waves generated during the epoch of cosmic inflation at more than $3\sigma$ for $r=(T/S)>=10^{-3}$. It will also measure the CMB gravitational lensing deflection power spectrum to the cosmic variance limit on all linear scales, allowing us to probe absolute neutrino masses better than laboratory experiments and down to plausible values suggested by the neutrino oscillation data. COrE will also search for primordial non-Gaussianity with significant improvements over Planck in its ability to constrain the shape (and amplitude) of non-Gaussianity. In the areas of galactic and extragalactic science, in its highest frequency channels COrE will provide maps of the galactic polarized dust emission allowing us to map the galactic magnetic field in areas of diffuse emission not otherwise accessible to probe the initial conditions for star formation. COrE will also map the galactic synchrotron emission thirty times better than PLANCK. This White Paper reviews the COrE science program, our simulations on foreground subtraction, and the proposed instrumental configuration.Comment: 90 pages Latex 15 figures (revised 28 April 2011, references added, minor errors corrected

Inverse Design of Three-Dimensional Frequency Selective Structures and Metamaterials using Multi-Objective Lazy Ant Colony Optimization

With the rise of big data and the “internet of things,” wireless signals permeate today’s environment more than ever before. As the demand for information and security continues to expand, the need for filtering a crowded signal space will become increasingly important. Although existing devices can achieve this with additional components, such as in-line filters and low noise amplifiers, these approaches introduce additional bulk, cost and complexity. An alternative, low-cost solution to filtering these signals can be achieved through the use of Frequency Selective Surfaces (FSSs), which are commonly used in antennas, polarizers, radomes, and intelligent architecture. FSSs typically consist of a doubly-periodic array of unit cells, which acts as a spatial electromagnetic filter that selectively rejects or transmits electromagnetic waves, based on the unit cell’s geometry and material properties. Unlike traditional analog filters, spatial filters must also account for the polarization and incidence angle of signals; thus, an ideal FSS maintains a given frequency response for all polarizations and incidence angles. Traditional FSS designs have ranged from planar structures with canonical shapes to miniaturized and multi-layer designs using fractals and other space-filling geometries. More recently, FSS research has expanded into three-dimensional (3D) designs, which have demonstrated enhanced fields of view over traditional planar and multi-layer designs. To date, nearly all FSSs still suffer from significant shifts in resonant frequencies or onset of grating lobes at incidence angles beyond 60 degrees in one or more polarizations. Additionally, while recent advances in additive manufacturing techniques have made fully 3D FSS designs increasingly popular, design tools to exploit these fabrication methods to develop FSSs with ultra-wide Fields of View (FOV) do not currently exist. In this dissertation, a Multi-Objective Lazy Ant Colony Optimization (MOLACO) scheme will be introduced and applied to the problem of 3D FSS design for extreme FOVs. The versatility of this algorithm will further be demonstrated through application to the design of meander line antennas, optical antennas, and phase-gradient metasurfaces

Gradient metasurfaces: a review of fundamentals and applications

In the wake of intense research on metamaterials the two-dimensional analogue, known as metasurfaces, has attracted progressively increasing attention in recent years due to the ease of fabrication and smaller insertion losses, while enabling an unprecedented control over spatial distributions of transmitted and reflected optical fields. Metasurfaces represent optically thin planar arrays of resonant subwavelength elements that can be arranged in a strictly or quasi periodic fashion, or even in an aperiodic manner, depending on targeted optical wavefronts to be molded with their help. This paper reviews a broad subclass of metasurfaces, viz. gradient metasurfaces, which are devised to exhibit spatially varying optical responses resulting in spatially varying amplitudes, phases and polarizations of scattered fields. Starting with introducing the concept of gradient metasurfaces, we present classification of different metasurfaces from the viewpoint of their responses, differentiating electrical-dipole, geometric, reflective and Huygens' metasurfaces. The fundamental building blocks essential for the realization of metasurfaces are then discussed in order to elucidate the underlying physics of various physical realizations of both plasmonic and purely dielectric metasurfaces. We then overview the main applications of gradient metasurfaces, including waveplates, flat lenses, spiral phase plates, broadband absorbers, color printing, holograms, polarimeters and surface wave couplers. The review is terminated with a short section on recently developed nonlinear metasurfaces, followed by the outlook presenting our view on possible future developments and perspectives for future applications.Comment: Accepted for publication in Reports on Progress in Physic

Metamaterial

In-depth analysis of the theory, properties and description of the most potential technological applications of metamaterials for the realization of novel devices such as subwavelength lenses, invisibility cloaks, dipole and reflector antennas, high frequency telecommunications, new designs of bandpass filters, absorbers and concentrators of EM waves etc. In order to create a new devices it is necessary to know the main electrodynamical characteristics of metamaterial structures on the basis of which the device is supposed to be created. The electromagnetic wave scattering surfaces built with metamaterials are primarily based on the ability of metamaterials to control the surrounded electromagnetic fields by varying their permeability and permittivity characteristics. The book covers some solutions for microwave wavelength scales as well as exploitation of nanoscale EM wavelength such as visible specter using recent advances of nanotechnology, for instance in the field of nanowires, nanopolymers, carbon nanotubes and graphene. Metamaterial is suitable for scholars from extremely large scientific domain and therefore given to engineers, scientists, graduates and other interested professionals from photonics to nanoscience and from material science to antenna engineering as a comprehensive reference on this artificial materials of tomorrow