139,707 research outputs found
Qualification Testing, Evaluation and Test Methods of Gas Generator for IEDs Applications
In this work, the design qualification testing, evaluation and test methods of gas generator using double base (DB) propellant having square flake shape is explained for an improvised explosive devices (IEDs) applications. Various kinds of the gas generators are used to save life of an aeronaut in the fastest way from the disable fighter aircraft. Due to their ruggedised design, compactness, safe transportation, repeatability in performance and quick operation, the gas generator are used. The gas generator is designed and developed keeping functional, mechanical and structural requirements in mind. The gas generators are subjected to the various qualification tests, electrical characterisation followed by closed vessel (CV) firings at hot and cold temperatures. The gas generators after the successful qualification tests are validated through the ground trials i.e. dynamic firing of disruptor during the development phase. The damage caused due to impact of the projectile is assessed in terms of crater as acceptance criteria at stand-off distance of 0.5 m and 1m. The gas generator discussed in this research article is used to disrupt the suspected IEDs by creating a high-speed jet using water-jet disruptor. In conclusion, after successful qualification testing, the gas generator for IEDs application meets all the specifications as per user’s requirements
Recommended from our members
Opportunities for and challenges to further reductions in the “specific power” rating of wind turbines installed in the United States
A wind turbine’s “specific power” rating relates its capacity to the swept area of its rotor in terms of Watt per square meter. For a given generator capacity, specific power declines as rotor size increases. In land-rich but capacity-constrained wind power markets, such as the United States, developers have an economic incentive to maximize megawatt-hours per constrained megawatt, and so have favored turbines with ever-lower specific power. To date, this trend toward lower specific power has pushed capacity factors higher while reducing the levelized cost of energy. We employ geospatial levelized cost of energy analysis across the United States to explore whether this trend is likely to continue. We find that under reasonable cost scenarios (i.e. presuming that logistical challenges from very large blades are surmountable), low-specific-power turbines could continue to be in demand going forward. Beyond levelized cost of energy, the boost in market value that low-specific-power turbines provide could become increasingly important as wind penetration grows
Contra-rotating marine current turbines : single point tethered floating system - stabilty and performance
The Energy Systems Research Unit within the Department of Mechanical Engineering at the University of Strathclyde has developed a novel contra-rotating tidal turbine (CoRMaT). A series of tank and sea tests have led to the development and deployment of a small stand-alone next generation tidal turbine. Novel aspects of this turbine include its single point compliant mooring system, direct drive open to sea permanent magnet generator, and two contra-rotating sets of rotor blades. The sea testing of the turbine off the west coast of Scotland in the Sound of Islay is described; the resulting stability of a single-point tethered device and power quality from the direct drive generator is reported and evaluated. It is noted that reasonably good moored turbine stability within a real tidal stream can be achieved with careful design; however even quite small instabilities have an effect on the output electrical power quality. Finally, the power take-off and delivery options for a 250kW production prototype are described and assessed
Calculation of guaranteed mean power from wind turbine generators
A method for calculating the 'guaranteed mean' power output of a wind turbine generator is proposed. The term 'mean power' refers to the average power generated at specified wind speeds during short-term tests. Correlation of anemometers, the method of bins for analyzing non-steady data, the PROP Code for predicting turbine power, and statistical analysis of deviations in test data from theory are discussed. Guaranteed mean power density for the Clayton Mod-OA system was found to be 8 watts per square meter less than theoretical power density at all power levels, with a confidence level of 0.999. This amounts to 4 percent of rated power
Investigation of multi-phase tubular permanent magnet linear generator for wave energy converters
In this article, an investigation into different magnetization topologies for a long stator tubular permanent magnet linear generator is performed through a comparison based on the cogging force disturbance, the power output, and the cost of the raw materials of the machines. The results obtained from finite element analysis simulation are compared with an existing linear generator described in [1]. To ensure accurate results, the generator developed in [1] is built with 3D CAD and simulated using the finite-element method, and the obtained results are verified with the source.The PRIMaRE project
Recommended from our members
Challenges in the Development of Micro Gas Turbines for Concentrated Solar Power Systems
Parabolic solar dish systems have gained more interest recently as a reliable way for harnessing the solar power in form of electricity. Micro gas turbines can be usedas engines in such system to convert the heat available from the solar collector o electricity. In this paper the technical challenges related to using micro gas turbines for utilising concentrated solar power will be addressed based on the experience gained from the EU funded project OMSoP (Optimised Microturbine Solar Power system) which aims todevelop and demonstrate a micro gas turbine coupled to a parabolic dish for the power range of 5–10 kW. The technical challenges related to the turbomachinery design, rotordynamics and dynamic stability, control system, power electronics and thermal storage will be briefly reviewed. Techno economic considerations of the system will also be discussed
Full field image ranger hardware
We describe the hardware designed to implement a full field heterodyning imaging system. Comprising three key components - a light source, high speed shutter and a signal generator - the system is expected to be capable of simultaneous range measurements to millimetre precision over the entire field of view. Current modulated laser diodes provide the required illumination, with a bandwidth of 100 MHz and peak output power exceeding 600 mW. The high speed shutter action is performed by gating the cathode of an image intensifier, driven by a 50 Vpp waveform with 3.5 ns rise and fall times. A direct digital synthesiser, with multiple synchronised channels, provides high stability between its outputs, 160 MHz bandwidth and tuning of 0.1 Hz
An approach to high speed ship ride quality simulation
The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status
Evolution and Modern Approaches for Thermal Analysis of Electrical Machines
In this paper, the authors present an extended survey on the evolution and the modern approaches in the thermal analysis of electrical machines. The improvements and the new techniques proposed in the last decade are analyzed in depth and compared in order to highlight the qualities and defects of each. In particular, thermal analysis based on lumped-parameter thermal network, finite-element analysis, and computational fluid dynamics are considered in this paper. In addition, an overview of the problems linked to the thermal parameter determination and computation is proposed and discussed. Taking into account the aims of this paper, a detailed list of books and papers is reported in the references to help researchers interested in these topics
- …