Simulink modeling and design of an efficient hardware-constrained FPGA-based PMSM speed controller

The aim of this paper is to present a holistic approach to modeling and FPGA implementation of a permanent magnet synchronous motor (PMSM) speed controller. The whole system is modeled in the Matlab Simulink environment. The controller is then translated to discrete time and remodeled using System Generator blocks, directly synthesizable into FPGA hardware. The algorithm is further refined and factorized to take into account hardware constraints, so as to fit into a low cost FPGA, without significantly increasing the execution time. The resulting controller is then integrated together with sensor interfaces and analysis tools and implemented into an FPGA device. Experimental results validate the controller and verify the design

An end-user platform for FPGA-based design and rapid prototyping of feedforward artificial neural networks with on-chip backpropagation learning

The hardware implementation of an artificial neural network (ANN) using field-programmable gate arrays (FPGAs) is a research field that has attracted much interest and attention. With the developments made, the programmer is now forced to face various challenges, such as the need to master various complex hardware-software development platforms, hardware description languages, and advanced ANN knowledge. Moreover, such an implementation is very time consuming. To address these challenges, this paper presents a novel neural design methodology using a holistic modeling approach. Based on the end-user programming concept, the presented solution empowers end users by means of abstracting the low-level hardware functionalities, streamlining the FPGA design process and supporting rapid ANN prototyping. A case study of an ANN as a pattern recognition module of an artificial olfaction system trained to identify four coffee brands is presented. The recognition rate versus training data features and data representation was analyzed extensively

FPGAs in Industrial Control Applications

The aim of this paper is to review the state-of-the-art of Field Programmable Gate Array (FPGA) technologies and their contribution to industrial control applications. Authors start by addressing various research fields which can exploit the advantages of FPGAs. The features of these devices are then presented, followed by their corresponding design tools. To illustrate the benefits of using FPGAs in the case of complex control applications, a sensorless motor controller has been treated. This controller is based on the Extended Kalman Filter. Its development has been made according to a dedicated design methodology, which is also discussed. The use of FPGAs to implement artificial intelligence-based industrial controllers is then briefly reviewed. The final section presents two short case studies of Neural Network control systems designs targeting FPGAs

A comparison of simulation and hardware-in-the-loop alternatives for digital control of power converters

Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. A. Sánchez, Á. de Castro, J. Garrido, "A Comparison of Simulation and Hardware-in-the- Loop Alternatives for Digital Control of Power Converters", IEEE Transactions on Industrial Informatics, vol. 8, no. 3, pp. 491 - 500, Aug. 2012Debugging digital controllers for power converters can be a problem because there are both digital and analog components. This paper focuses on debugging digital controllers to be implemented in Field Programmable Gate Arrays or Application Specific Integrated Circuits, which are designed in hardware description languages. Four methods are proposed and described. All of them allow simulation, and two methods also allow emulation-synthesizing the model of the converter to run the complete closed-loop system in actual hardware. The first method consists in using a mixed analog and digital simulator. This is the easiest alternative for the designer, but simulation time can be a problem, specially for long simulations like those necessary in power factor correction or when the controller is very complex, for example, with embedded processors. The alternative is to use pure digital models, generating a digital model of the power converter. Three methods are proposed: real type, float type and fixed point models (in the latter case including hand-coded and automatic-coded descriptions). Float and fixed point models are synthesizable, so emulation is possible, achieving speedups over 20 000. The results obtained with each method are presented, highlighting the advantages and disadvantages of each one. Apart from that, an analysis of the necessary resolution in the variables is presented, being the main conclusion that 32-bit floating point is not enough for medium and high switching frequencies

Comparison of different design alternatives for hardware-in-the-loop of power converters

This paper aims to compare different design alternatives of hardware-in-the-loop (HIL) for emulating power converters in Field Programmable Gate Arrays (FPGAs). It proposes various numerical formats (fixed and floating-point) and different approaches (pure VHSIC Hardware Description Language (VHDL), Intellectual Properties (IPs), automated MATLAB HDL code, and High-Level Synthesis (HLS)) to design power converters. Although the proposed models are simple power electronics HIL systems, the idea can be extended to any HIL system. This study compares the design effort of different coding methods and numerical formats considering possible synthesis tools (Precision and Vivado), and it comprises an analytical discussion in terms of area and speed. The different models are synthesized as ad-hoc modules in general-purpose FPGAs, but also using the NI myRIO device as an example of a commercial tool capable of implementing HIL models. The comparison confirms that the optimum design alternative must be chosen based on the application (complexity, frequency, etc.) and designers’ constraints, such as available area, coding expertise, and design effor

Efficient Architecture and Implementation of Vector Median Filter in Co-Design Context

This work presents an efficient fast parallel architecture of the Vector Median Filter (VMF) using combined hardware/software (HW/SW) implementation. The hardware part of the system is implemented using VHDL language, whereas the software part is developed using C/C++ language. The software part of the embedded system uses the NIOS-II softcore processor and the operating system used is μClinux. The comparison between the software and HW/SW solutions shows that adding a hardware part in the design attempts to speed up the filtering process compared to the software solution. This efficient embedded system implementation can perform well in several image processing applications