High-Performance FPGA Implementation of Equivariant Adaptive Separation via Independence Algorithm for Independent Component Analysis

Independent Component Analysis (ICA) is a dimensionality reduction technique that can boost efficiency of machine learning models that deal with probability density functions, e.g. Bayesian neural networks. Algorithms that implement adaptive ICA converge slower than their nonadaptive counterparts, however, they are capable of tracking changes in underlying distributions of input features. This intrinsically slow convergence of adaptive methods combined with existing hardware implementations that operate at very low clock frequencies necessitate fundamental improvements in both algorithm and hardware design. This paper presents an algorithm that allows efficient hardware implementation of ICA. Compared to previous work, our FPGA implementation of adaptive ICA improves clock frequency by at least one order of magnitude and throughput by at least two orders of magnitude. Our proposed algorithm is not limited to ICA and can be used in various machine learning problems that use stochastic gradient descent optimization

Detection and Processing Techniques of FECG Signal for Fetal Monitoring

Fetal electrocardiogram (FECG) signal contains potentially precise information that could assist clinicians in making more appropriate and timely decisions during labor. The ultimate reason for the interest in FECG signal analysis is in clinical diagnosis and biomedical applications. The extraction and detection of the FECG signal from composite abdominal signals with powerful and advance methodologies are becoming very important requirements in fetal monitoring. The purpose of this review paper is to illustrate the various methodologies and developed algorithms on FECG signal detection and analysis to provide efficient and effective ways of understanding the FECG signal and its nature for fetal monitoring. A comparative study has been carried out to show the performance and accuracy of various methods of FECG signal analysis for fetal monitoring. Finally, this paper further focused some of the hardware implementations using electrical signals for monitoring the fetal heart rate. This paper opens up a passage for researchers, physicians, and end users to advocate an excellent understanding of FECG signal and its analysis procedures for fetal heart rate monitoring system

Research on performance enhancement for electromagnetic analysis and power analysis in cryptographic LSI

制度:新 ; 報告番号:甲3785号 ; 学位の種類:博士(工学) ; 授与年月日:2012/11/19 ; 早大学位記番号:新6161Waseda Universit

A Hardware-Friendly Algorithm for Scalable Training and Deployment of Dimensionality Reduction Models on FPGA

With ever-increasing application of machine learning models in various domains such as image classification, speech recognition and synthesis, and health care, designing efficient hardware for these models has gained a lot of popularity. While the majority of researches in this area focus on efficient deployment of machine learning models (a.k.a inference), this work concentrates on challenges of training these models in hardware. In particular, this paper presents a high-performance, scalable, reconfigurable solution for both training and deployment of different dimensionality reduction models in hardware by introducing a hardware-friendly algorithm. Compared to state-of-the-art implementations, our proposed algorithm and its hardware realization decrease resource consumption by 50\% without any degradation in accuracy

A Comparison of ICA versus genetic algorithm optimized ICA for use in non-invasive muscle tissue EMG

Includes bibliographical references.The patent developed by Dr. L. John [1] allows for the the detection of deep muscle activation through the combination of specially positioned monopolar surface Electromyography (sEMG) electrodes and a Blind Source Separation algorithm. This concept was then proved by Morowasi and John [2] in a 12 electrode prototype system around the bicep. This proof of concept showed that it was possible to extract the deep tissue activity of the brachialis muscle in the upper arm, however, the effect of surface electrode positioning and effectual number of electrodes on signal quality is still unclear. The hope of this research is to extend this work. In this research, a genetic algorithm (GA) is implemented on top of the Fast Independent Component Analysis (FastICA) algorithm to reduce the number of electrodes needed to isolate the activity from all muscles in the upper arm, including deep tissue. The GA selects electrodes based on the amount of significant information they contribute to the ICA solution and by doing so, a reduced electrode set is generated and alternative electrode positions are identified. This allows a near optimal electrode configuration to be produced for each user. The benefits of this approach are: 1.The generalized electrode array and this algorithm can select the near optimal electrode arrangement with very minimal understanding of the underlying anatomy. 2. It can correct for small anatomical differences between test subjects and act as a calibration phase for individuals. As with any design there are also disadvantages, such as each user needs to have the electrode placement specifically customised for him or her and this process needs to be conducted using a higher number of electrodes to begin with

Techniques for low-cost spectrum analysis on quadrature demodulation architectures

The Decimator, an SED Systems Ltd. product, is a PCI slot card that performs both time and frequency domain measurements of given input signals. It is essentially a more economical version of a bench spectrum analyzer or oscilloscope, with a PC interface. Several issues limit the speed and accuracy of the results of the Decimator, and the study of these issues is the focus of this thesis. These issues, including but not limited to, are as follows: 1) Imbalances between the received In-phase and Quadrature-phase channels; 2) The FFT and Windowing functions are performed by a microcontroller, but it is desired that they be migrated to an FPGA. While solutions to improve the first issue is being implemented and verified, the second issue is not one of simply reducing a source of error. The second issue requires a cost-benefit analysis on the migration of these signal processing algorithms from an ARM microcontroller to a Xilinx FPGA

Optimization of a hardware/software coprocessing platform for EEG eyeblink detection and removal

The feasibility of implementing a real-time system for removing eyeblink artifacts from electroencephalogram (EEG) recordings utilizing a hardware/software coprocessing platform was investigated. A software based wavelet and independent component analysis (ICA) eyeblink detection and removal process was extended to enable variation in its processing parameters. Exploiting the efficiency of hardware and the reconfigurability of software, it was ported to a field programmable gate array (FPGA) development platform which was found to be capable of implementing the revised algorithm, although not in real-time. The implemented hardware and software solution was applied to a collection of both simulated and clinically acquired EEG data with known artifact and waveform characteristics to assess its speed and accuracy. Configured for optimal accuracy in terms of minimal false positives and negatives as well as maintaining the integrity of the underlying EEG, especially when encountering EEG waveform patterns with an appearance similar to eyeblink artifacts, the system was capable of processing a 10 second EEG epoch in an average of 123 seconds. Configured for efficiency, but with diminished accuracy, the system required an average of 34 seconds. Varying the ICA contrast function showed that the gaussian nonlinearity provided the best combination of reliability and accuracy, albeit with a long execution time. The cubic nonlinearity was fast, but unreliable, while the hyperbolic tangent contrast function frequently diverged. It is believed that the utilization of programmable logic with increased logic capacity and processing speed may enable this approach to achieve the objective of real-time operation

Development of Novel Independent Component Analysis Techniques and their Applications

Real world problems very often provide minimum information regarding their causes. This is mainly due to the system complexities and noninvasive techniques employed by scientists and engineers to study such systems. Signal and image processing techniques used for analyzing such systems essentially tend to be blind. Earlier, training signal based techniques were used extensively for such analyses. But many times either these training signals are not practicable to be availed by the analyzer or become burden on the system itself. Hence blind signal/image processing techniques are becoming predominant in modern real time systems. In fact, blind signal processing has become a very important topic of research and development in many areas, especially biomedical engineering, medical imaging, speech enhancement, remote sensing, communication systems, exploration seismology, geophysics, econometrics, data mining, sensor networks etc. Blind Signal Processing has three major areas: Blind Signal Separation and Extraction, Independent Component Analysis (ICA) and Multichannel Blind Deconvolution and Equalization. ICA technique has also been typically applied to the other two areas mentioned above. Hence ICA research with its wide range of applications is quite interesting and has been taken up as the central domain of the present work