Design of a 4.2-5.4 GHz Differential LC VCO using 0.35 m SiGe BiCMOS Technology

In this paper, a 4.2-5.4 GHz, Gm LC voltage controlled oscillator (VCO) for IEEE 802.11a standard is presented. The circuit is designed with AMS 0.35´m SiGe BiCMOS process that includes high-speed SiGe Heterojunction Bipolar Transistors (HBTs). Phase noise is -110.7 dBc/Hz at 1MHz offset from 5.4 GHz carrier frequency and -113.5 dBc/Hz from 4.2 GHz carrier frequency. A linear, 1200 MHz tuning range is obtained utilizing accumulation-mode varactors. Phase noise is relatively low due to taking the advantage of differential tuning concept. Output power of the fundamental frequency changes between 4.8 dBm and 5.5 dBm depending on the tuning voltage. The circuit draws 2 mA without buffers and 14.5 mA from 2.5 V supply including buffer circuits leading to a total power dissipation of 36.25 mW. The circuit occupies an area of 0.6 mm2 on Si substrate including RF and DC pads

Design of a tunable multi-band differential LC VCO using 0.35 mu m SiGe BiCMOS technology for multi-standard wireless communication systems

In this paper, an integrated 2.2-5.7GHz multi-band differential LC VCO for multi-standard wireless communication systems was designed utilizing 0.35 mu m SiGe BiCMOS technology. The topology, which combines the switching inductors and capacitors together in the same circuit, is a novel approach for wideband VCOs. Based on the post-layout simulation results, the VCO can be tuned using a DC voltage of 0 to 3.3 V for 5 different frequency bands (2.27-2.51 GHz, 2.48-2.78 GHz, 3.22-3.53 GHz, 3.48-3.91 GHz and 4.528-5.7 GHz) with a maximum bandwidth of 1.36 GHz and a minimum bandwidth of 300 MHz. The designed and simulated VCO can generate a differential output power between 0.992 and -6.087 dBm with an average power consumption of 44.21 mW including the buffers. The average second and third harmonics level were obtained as -37.21 and -47.6 dBm, respectively. The phase noise between -110.45 and -122.5 dBc/Hz, that was simulated at 1 MHz offset, can be obtained through the frequency of interest. Additionally, the figure of merit (FOM), that includes all important parameters such as the phase noise, the power consumption and the ratio of the operating frequency to the offset frequency, is between -176.48 and -181.16 and comparable or better than the ones with the other current VCOs. The main advantage of this study in comparison with the other VCOs, is covering 5 frequency bands starting from 2.27 up to 5.76 GHz without FOM and area abandonment. Output power of the fundamental frequency changes between -6.087 and 0.992 dBm, depending on the bias conditions (operating bands). Based on the post-layout simulation results, the core VCO circuit draws a current between 2.4-6.3 mA and between 11.4 and 15.3 mA with the buffer circuit from 3.3 V supply. The circuit occupies an area of 1.477 mm(2) on Si substrate, including DC, digital and RF pads

A CMOS differential noise-shifting Colpitts VCO

A 0.35 μm VCO uses current switching to increase voltage swing, lower phase noise by cyclostationary noise alignment, and improve startup reliability. A CMOS VCO in a 3-metal, 0.35 μm process has -139 dBc/Hz phase noise at 3 MHz offset from a 1.8 GHz carrier and 30% of continuous tuning using inductors with Q of 6 and 4 mA dc current