A comparative study of physiological monitoring with a wearable opto-electronic patch sensor (OEPS) for motion reduction

This paper presents a comparative study in physiological monitoring between a wearable opto-electronic patch sensor (OEPS) comprising a three-axis Microelectromechanical systems (MEMs) accelerometer (3MA) and commercial devices. The study aims to effectively capture critical physiological parameters, for instance, oxygen saturation, heart rate, respiration rate and heart rate variability, as extracted from the pulsatile waveforms captured by OEPS against motion artefacts when using the commercial probe. The protocol involved 16 healthy subjects and was designed to test the features of OEPS, with emphasis on the effective reduction of motion artefacts through the utilization of a 3MA as a movement reference. The results show significant agreement between the heart rates from the reference measurements and the recovered signals. Significance of standard deviation and error of mean yield values of 2.27 and 0.65 beats per minute, respectively; and a high correlation (0.97) between the results of the commercial sensor and OEPS. T, Wilcoxon and Bland-Altman with 95% limit of agreement tests were also applied in the comparison of heart rates extracted from these sensors, yielding a mean difference (MD: 0.08). The outcome of the present work incites the prospects of OEPS on physiological monitoring during physical activities

Robust contactless pulse transit time estimation based on signal quality metric

The pulse transit time (PTT) can provide valuable insight into cardiovascular health, specifically regarding arterial stiffness and blood pressure. Traditionally, PTT is derived by calculating the time difference between two photoplethysmography (PPG) measurements, which require a set of body-worn sensors attached to the skin. Recently, remote photoplethysmography (rPPG) has been proposed as a contactless monitoring alternative. The main problem with rPPG based PTT estimation is that motion artifacts affect the shape of waveform leading to the shift or over-detected peaks, which decreases the accuracy of PTT. To overcome this problem, this paper presents a robust pulse-by-pulse PTT estimation framework using a signal quality metric. By exploiting the local temporal information and global periodic characteristics, the metric automatically assesses pulse quality of signal on a pulse-by-pulse basis, and calculates the probabilities of the pulse peak being the actual peak. Furthermore, in order to cope with over-detected and shift pulse peaks, Kalman filter complemented by the proposed signal quality metric is used to adaptively adjust the peaks based on the estimated probability. All the refined peaks are finally used for pulse-by-pulse PTT estimation. The experiment results are promising, suggesting that the proposed framework provides a robust and more accurate PTT estimation in real applications

Characterizing the Noise Associated with Sensor Placement and Motion Artifacts and Overcoming its Effects for Body-worn Physiological Sensors

Wearable sensors for continuous physiological monitoring have the potential to change the paradigm for healthcare by providing information in scenarios not covered by the existing clinical model. One key challenge for wearable physiological sensors is that their signal-to-noise ratios are low compared to those of their medical grade counterparts in hospitals. Two primary sources of noise are the sensor-skin contact interface and motion artifacts due to the user’s daily activities. These are challenging problems because the initial sensor placement by the user may not be ideal, the skin conditions can change over time, and the nature of motion artifacts is not predictable. The objective of this research is twofold. The first is to design sensors with reconfigurable contact to mitigate the effects of misplaced sensors or changing skin conditions. The second is to leverage signal processing techniques for accurate physiological parameter estimation despite the presence of motion artifacts. In this research, the sensor contact problem was specifically addressed for dry-contact electroencephalography (EEG). The proposed novel extension to a popular existing EEG electrode design enabled reconfigurable contact to adjust to variations in sensor placement and skin conditions over time. Experimental results on human subjects showed that reconfiguration of contact can reduce the noise in collected EEG signals without the need for manual intervention. To address the motion artifact problem, a particle filter based approach was employed to track the heart rate in cardiac signals affected by the movements of the user. The algorithm was tested on cardiac signals from human subjects running on a treadmill and showed good performance in accurately tracking heart rate. Moreover, the proposed algorithm enables fusion of multiple modalities and is also computationally more efficient compared to other contemporary approaches

Heart Rate Estimation During Physical Exercise Using Wrist-Type Ppg Sensors

Accurate heart rate monitoring during intense physical exercise is a challenging problem due to the high levels of motion artifacts (MA) in photoplethysmography (PPG) sensors. PPG is a non-invasive optical sensor that is being used in wearable devices to measure blood flow changes using the property of light reflection and absorption, allowing the extraction of vital signals such as the heart rate (HR). However, the sensor is susceptible to MA which increases during physical activity. This occurs since the frequency range of movement and HR overlaps, difficulting correct HR estimation. For this reason, MA removal has remained an active topic under research. Several approaches have been developed in the recent past and among these, a Kalman filter (KF) based approach showed promising results for an accurate estimation and tracking using PPG sensors. However, this previous tracker was demonstrated for a particular dataset, with manually tuned parameters. Moreover, such trackers do not account for the correct method for fusing data. Such a custom approach might not perform accurately in practical scenarios, where the amount of MA and the heart rate variability (HRV) depend on numerous, unpredictable factors. Thus, an approach to automatically tune the KF based on the Expectation-Maximization (EM) algorithm, with a measurement fusion approach is developed. The applicability of such a method is demonstrated using an open-source PPG database, as well as a developed synthetic generation tool that models PPG and accelerometer (ACC) signals during predetermined physical activities

A Wearable System for Real-Time Continuous Monitoring of Physical Activity

Over the last decades, wearable systems have gained interest for monitoring of physiological variables, promoting health, and improving exercise adherence in different populations ranging from elite athletes to patients. In this paper, we present a wearable system for the continuous real-time monitoring of respiratory frequency (fR), heart rate (HR), and movement cadence during physical activity. The system has been experimentally tested in the laboratory (by simulating the breathing pattern with a mechanical ventilator) and by collecting data from one healthy volunteer. Results show the feasibility of the proposed device for real-time continuous monitoring of fR, HR, and movement cadence both in resting condition and during activity. Finally, different synchronization techniques have been investigated to enable simultaneous data collection from different wearable modules.Ministerio de Economía y Competitivida

Wearable and Nearable Biosensors and Systems for Healthcare

Biosensors and systems in the form of wearables and “nearables” (i.e., everyday sensorized objects with transmitting capabilities such as smartphones) are rapidly evolving for use in healthcare. Unlike conventional approaches, these technologies can enable seamless or on-demand physiological monitoring, anytime and anywhere. Such monitoring can help transform healthcare from the current reactive, one-size-fits-all, hospital-centered approach into a future proactive, personalized, decentralized structure. Wearable and nearable biosensors and systems have been made possible through integrated innovations in sensor design, electronics, data transmission, power management, and signal processing. Although much progress has been made in this field, many open challenges for the scientific community remain, especially for those applications requiring high accuracy. This book contains the 12 papers that constituted a recent Special Issue of Sensors sharing the same title. The aim of the initiative was to provide a collection of state-of-the-art investigations on wearables and nearables, in order to stimulate technological advances and the use of the technology to benefit healthcare. The topics covered by the book offer both depth and breadth pertaining to wearable and nearable technology. They include new biosensors and data transmission techniques, studies on accelerometers, signal processing, and cardiovascular monitoring, clinical applications, and validation of commercial devices

Methods and systems for extracting venous pulsation and respiratory information from photoplethysmographs

A system and method for separating a venous component and an arterial component from a red signal and an infrared signal of a PPG sensor is provided. The method uses the second order statistics of venous and arterial signals to separate the venous andarterial signals. After reliable separation of the venous and thearterial component signals,the component signals can be used for different purposes. In a preferred embodiment, the respiratory signal, pattern, and rate are extracted from the separated venous component and a reliable ?ratio of ratios? is extracted for SpO, using only the arterial component of the PPG signals. The disclosed embodiments enable real-time continuous monitoring of respiration pattern/rate and site-independentarterial oxygen saturation.Board of Regents, University of Texas Syste