Savior: A Reliable Fault Resilient Router Architecture for Network-on-Chip

[EN] The router plays an important role in communication among different processing cores in on-chip networks. Technology scaling on one hand has enabled the designers to integrate multiple processing components on a single chip; on the other hand, it becomes the reason for faults. A generic router consists of the buffers and pipeline stages. A single fault may result in an undesirable situation of degraded performance or a whole chip may stop working. Therefore, it is necessary to provide permanent fault tolerance to all the components of the router. In this paper, we propose a mechanism that can tolerate permanent faults that occur in the router. We exploit the fault-tolerant techniques of resource sharing and paring between components for the input port unit and routing computation (RC) unit, the resource borrowing for virtual channel allocator (VA) and multiple paths for switch allocator (SA) and crossbar (XB). The experimental results and analysis show that the proposed mechanism enhances the reliability of the router architecture towards permanent faults at the cost of 29% area overhead. The proposed router architecture achieves the highest Silicon Protection Factor (SPF) metric, which is 24.4 as compared to the state-of-the-art fault-tolerant architectures. It incurs an increase in latency for SPLASH2 and PARSEC benchmark traffics, which is minimal as compared to the baseline router.This work was supported by the Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I+D d Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).Hussain, A.; Irfan, M.; Baloch, NK.; Draz, U.; Ali, T.; Glowacz, A.; Dunai, L.... (2020). Savior: A Reliable Fault Resilient Router Architecture for Network-on-Chip. Electronics. 9(11):1-18. https://doi.org/10.3390/electronics9111783S118911Borkar, S. (1999). Design challenges of technology scaling. IEEE Micro, 19(4), 23-29. doi:10.1109/40.782564Latif, K., Rahmani, A.-M., Nigussie, E., Seceleanu, T., Radetzki, M., & Tenhunen, H. (2013). Partial Virtual Channel Sharing: A Generic Methodology to Enhance Resource Management and Fault Tolerance in Networks-on-Chip. Journal of Electronic Testing, 29(3), 431-452. doi:10.1007/s10836-013-5389-5Borkar, S. (2005). Designing Reliable Systems from Unreliable Components: The Challenges of Transistor Variability and Degradation. IEEE Micro, 25(6), 10-16. doi:10.1109/mm.2005.110Ali, T., Noureen, J., Draz, U., Shaf, A., Yasin, S., & Ayaz, M. (2018). Participants Ranking Algorithm for Crowdsensing in Mobile Communication. ICST Transactions on Scalable Information Systems, 5(16), 154476. doi:10.4108/eai.13-4-2018.154476Ali, T., Draz, U., Yasin, S., Noureen, J., shaf, A., & Zardari, M. (2018). An Efficient Participant’s Selection Algorithm for Crowdsensing. International Journal of Advanced Computer Science and Applications, 9(1). doi:10.14569/ijacsa.2018.090154Poluri, P., & Louri, A. (2016). Shield: A Reliable Network-on-Chip Router Architecture for Chip Multiprocessors. IEEE Transactions on Parallel and Distributed Systems, 27(10), 3058-3070. doi:10.1109/tpds.2016.2521641Valinataj, M., & Shahiri, M. (2016). A low-cost, fault-tolerant and high-performance router architecture for on-chip networks. Microprocessors and Microsystems, 45, 151-163. doi:10.1016/j.micpro.2016.04.009Kim, J., Nicopoulos, C., Park, D., Narayanan, V., Yousif, M. S., & Das, C. R. (2006). A Gracefully Degrading and Energy-Efficient Modular Router Architecture for On-Chip Networks. ACM SIGARCH Computer Architecture News, 34(2), 4-15. doi:10.1145/1150019.1136487Polian, I., & Hayes, J. P. (2011). Selective Hardening: Toward Cost-Effective Error Tolerance. IEEE Design & Test of Computers, 28(3), 54-63. doi:10.1109/mdt.2010.120Mohammed, H., Flayyih, W., & Rokhani, F. (2019). Tolerating Permanent Faults in the Input Port of the Network on Chip Router. Journal of Low Power Electronics and Applications, 9(1), 11. doi:10.3390/jlpea9010011Wang, L., Ma, S., Li, C., Chen, W., & Wang, Z. (2017). A high performance reliable NoC router. Integration, 58, 583-592. doi:10.1016/j.vlsi.2016.10.016Shafique, M. A., Baloch, N. K., Baig, M. I., Hussain, F., Zikria, Y. B., & Kim, S. W. (2020). NoCGuard: A Reliable Network-on-Chip Router Architecture. Electronics, 9(2), 342. doi:10.3390/electronics9020342Poluri, P., & Louri, A. (2015). A Soft Error Tolerant Network-on-Chip Router Pipeline for Multi-Core Systems. IEEE Computer Architecture Letters, 14(2), 107-110. doi:10.1109/lca.2014.2360686Feng, C., Lu, Z., Jantsch, A., Zhang, M., & Xing, Z. (2013). Addressing Transient and Permanent Faults in NoC With Efficient Fault-Tolerant Deflection Router. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 21(6), 1053-1066. doi:10.1109/tvlsi.2012.2204909Liu, J., Harkin, J., Li, Y., & Maguire, L. P. (2016). Fault-Tolerant Networks-on-Chip Routing With Coarse and Fine-Grained Look-Ahead. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 35(2), 260-273. doi:10.1109/tcad.2015.2459050Runge, A. (2015). FaFNoC: A Fault-tolerant and Bufferless Network-on-chip. Procedia Computer Science, 56, 397-402. doi:10.1016/j.procs.2015.07.226Binkert, N., Beckmann, B., Black, G., Reinhardt, S. K., Saidi, A., Basu, A., … Wood, D. A. (2011). The gem5 simulator. ACM SIGARCH Computer Architecture News, 39(2), 1-7. doi:10.1145/2024716.202471

High-level services for networks-on-chip

Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed

Fault-tolerant building-block computer study

Ultra-reliable core computers are required for improving the reliability of complex military systems. Such computers can provide reliable fault diagnosis, failure circumvention, and, in some cases serve as an automated repairman for their host systems. A small set of building-block circuits which can be implemented as single very large integration devices, and which can be used with off-the-shelf microprocessors and memories to build self checking computer modules (SCCM) is described. Each SCCM is a microcomputer which is capable of detecting its own faults during normal operation and is described to communicate with other identical modules over one or more Mil Standard 1553A buses. Several SCCMs can be connected into a network with backup spares to provide fault-tolerant operation, i.e. automated recovery from faults. Alternative fault-tolerant SCCM configurations are discussed along with the cost and reliability associated with their implementation

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints