Fault Secure Encoder and Decoder for NanoMemory Applications

Memory cells have been protected from soft errors for more than a decade; due to the increase in soft error rate in logic circuits, the encoder and decoder circuitry around the memory blocks have become susceptible to soft errors as well and must also be protected. We introduce a new approach to design fault-secure encoder and decoder circuitry for memory designs. The key novel contribution of this paper is identifying and defining a new class of error-correcting codes whose redundancy makes the design of fault-secure detectors (FSD) particularly simple. We further quantify the importance of protecting encoder and decoder circuitry against transient errors, illustrating a scenario where the system failure rate (FIT) is dominated by the failure rate of the encoder and decoder. We prove that Euclidean geometry low-density parity-check (EG-LDPC) codes have the fault-secure detector capability. Using some of the smaller EG-LDPC codes, we can tolerate bit or nanowire defect rates of 10% and fault rates of 10^(-18) upsets/device/cycle, achieving a FIT rate at or below one for the entire memory system and a memory density of 10^(11) bit/cm^2 with nanowire pitch of 10 nm for memory blocks of 10 Mb or larger. Larger EG-LDPC codes can achieve even higher reliability and lower area overhead

An Elementary Proposal on Fault Tolerant Devices for Memory Scenario

The paper aims to propose as elementary work on a reliable memory system that can tolerate multiple transient errors in the memory words as well as multiple errors in the encoder and decoder (corrector) circuitry using one class of Error Correcting Codes i.e. type I 2-dimensional Euclidean Geometry Low-Density Parity-Check (EG-LDPC) codes and to quantify the importance of protecting encoder and corrector circuitry

Multiple Cell Upsets Correction for OLS Codes

ABSTRACT: An Error Correction code with Parity check matrix is implemented which is other type of the One Step Majority Logic Decodable (OS-MLD) called as Orthogonal Latin Squares (OLS) codes. It is a concurrent error detection technique for OLS codes encoders and syndrome computation because of the fact that when ECCs are used, the encoder and decoder circuits can also suffer errors.These OLS codes are used to correct the memories and caches. This can be achieved due to their modularity such that the error correction capabilities can be easily adapted to the error rate or to the mode of the operation.OLS codes typically require more parity bits than other codes to correct the same number of errors. However, due to their modularity and the simple low delay decoding implementation these are widely used in Error Correction. All the errors that affect a single circuit node are detected by the parity prediction scheme. The area and latency values are monitored

Correction Masking: a technique to implement efficient SET tolerant error correction decoders

Single Event Transients (SETs) can be a major concern for combinational circuits. Its importance grows as technology scales because a small charge can create a large disturbance on a circuit node. One example of circuits that can suffer from SETs is the decoders of the Error Correction Codes (ECCs) that are used to protect memories from errors. This paper presents Correction Masking (CM), a technique to implement SET tolerant syndrome decoders. The proposed technique is presented and evaluated both in terms of protection effectiveness and circuit overhead. The results show that it can provide an effective protection while reducing the circuit area and power significantly compared to a Triple Modular Redundancy (TMR) protection. An interesting result is that Correction Masking also reduces the delay as it adds less logic in the critical path than TMR. Finally, the proposed technique can be used for any syndrome decoder. This means that it is applicable to many of the ECCs used to protect memories such as Single Error Correction (SEC), Single Error Correction Double Error Detection (SEC-DED), Single Error Correction Double Adjacent Error Correction (SEC-DAEC), and 3-bit burst codes.The work of Pedro Reviriego was supported in part by the Spanish Agencia Estatal de Investigación (AEI) 10.13039/501100011033 through the ACHILLES Project under Grant PID2019-104207RB-I00 and the Go2Edge Network under Grant RED2018-102585-T, and in part by the Madrid Community Research Project TAPIR-CM under Grant P2018/TCS-4496.Publicad

The Road From Classical to Quantum Codes: A Hashing Bound Approaching Design Procedure

Powerful Quantum Error Correction Codes (QECCs) are required for stabilizing and protecting fragile qubits against the undesirable effects of quantum decoherence. Similar to classical codes, hashing bound approaching QECCs may be designed by exploiting a concatenated code structure, which invokes iterative decoding. Therefore, in this paper we provide an extensive step-by-step tutorial for designing EXtrinsic Information Transfer (EXIT) chart aided concatenated quantum codes based on the underlying quantum-to-classical isomorphism. These design lessons are then exemplified in the context of our proposed Quantum Irregular Convolutional Code (QIRCC), which constitutes the outer component of a concatenated quantum code. The proposed QIRCC can be dynamically adapted to match any given inner code using EXIT charts, hence achieving a performance close to the hashing bound. It is demonstrated that our QIRCC-based optimized design is capable of operating within 0.4 dB of the noise limit

On Fault Tolerance Methods for Networks-on-Chip

Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit. This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels. The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model. The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated. At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast

Contribution to the construction of fingerprinting and watermarking schemes to protect mobile agents and multimedia content

The main characteristic of fingerprinting codes is the need of high error-correction capacity due to the fact that they are designed to avoid collusion attacks which will damage many symbols from the codewords. Moreover, the use of fingerprinting schemes depends on the watermarking system that is used to embed the codeword into the content and how it honors the marking assumption. In this sense, even though fingerprinting codes were mainly used to protect multimedia content, using them on software protection systems seems an option to be considered. This thesis, studies how to use codes which have iterative-decoding algorithms, mainly turbo-codes, to solve the fingerprinting problem. Initially, it studies the effectiveness of current approaches based on concatenating tradicioanal fingerprinting schemes with convolutional codes and turbo-codes. It is shown that these kind of constructions ends up generating a high number of false positives. Even though this thesis contains some proposals to improve these schemes, the direct use of turbo-codes without using any concatenation with a fingerprinting code as inner code has also been considered. It is shown that the performance of turbo-codes using the appropiate constituent codes is a valid alternative for environments with hundreds of users and 2 or 3 traitors. As constituent codes, we have chosen low-rate convolutional codes with maximum free distance. As for how to use fingerprinting codes with watermarking schemes, we have studied the option of using watermarking systems based on informed coding and informed embedding. It has been discovered that, due to different encodings available for the same symbol, its applicability to embed fingerprints is very limited. On this sense, some modifications to these systems have been proposed in order to properly adapt them to fingerprinting applications. Moreover the behavior and impact over a video produced as a collusion of 2 users by the YouTube’s s ervice has been s tudied. We have also studied the optimal parameters for viable tracking of users who have used YouTube and conspired to redistribute copies generated by a collusion attack. Finally, we have studied how to implement fingerprinting schemes and software watermarking to fix the problem of malicious hosts on mobile agents platforms. In this regard, four different alternatives have been proposed to protect the agent depending on whether you want only detect the attack or avoid it in real time. Two of these proposals are focused on the protection of intrusion detection systems based on mobile agents. Moreover, each of these solutions has several implications in terms of infrastructure and complexity.Els codis fingerprinting es caracteritzen per proveir una alta capacitat correctora ja que han de fer front a atacs de confabulació que malmetran una part important dels símbols de la paraula codi. D'atra banda, la utilització de codis de fingerprinting en entorns reals està subjecta a que l'esquema de watermarking que gestiona la incrustació sigui respectuosa amb la marking assumption. De la mateixa manera, tot i que el fingerprinting neix de la protecció de contingut multimèdia, utilitzar-lo en la protecció de software comença a ser una aplicació a avaluar. En aquesta tesi s'ha estudiat com aplicar codis amb des codificació iterativa, concretament turbo-codis, al problema del rastreig de traïdors en el context del fingerprinting digital. Inicialment s'ha qüestionat l'eficàcia dels enfocaments actuals en la utilització de codis convolucionals i turbo-codis que plantegen concatenacions amb esquemes habituals de fingerprinting. S'ha demostrat que aquest tipus de concatenacions portaven, de forma implícita, a una elevada probabilitat d'inculpar un usuari innocent. Tot i que s'han proposat algunes millores sobre aquests esquemes , finalment s'ha plantejat l'ús de turbocodis directament, evitant així la concatenació amb altres esquemes de fingerprinting. S'ha demostrat que, si s'utilitzen els codis constituents apropiats, el rendiment del turbo-descodificador és suficient per a ser una alternativa aplicable en entorns amb varis centenars d'usuaris i 2 o 3 confabuladors . Com a codis constituents s'ha optat pels codis convolucionals de baix ràtio amb distància lliure màxima. Pel que fa a com utilitzar els codis de fingerprinting amb esquemes de watermarking, s'ha estudiat l'opció d'utilitzar sistemes de watermarking basats en la codificació i la incrustació informada. S'ha comprovat que, degut a la múltiple codificació del mateix símbol, la seva aplicabilitat per incrustar fingerprints és molt limitada. En aquest sentit s'ha plantejat algunes modificacions d'aquests sistemes per tal d'adaptar-los correctament a aplicacions de fingerprinting. D'altra banda s'ha avaluat el comportament i l'impacte que el servei de YouTube produeix sobre un vídeo amb un fingerprint incrustat. A més , s'ha estudiat els paràmetres òptims per a fer viable el rastreig d'usuaris que han confabulat i han utilitzat YouTube per a redistribuir la copia fruït de la seva confabulació. Finalment, s'ha estudiat com aplicar els esquemes de fingerprinting i watermarking de software per solucionar el problema de l'amfitrió maliciós en agents mòbils . En aquest sentit s'han proposat quatre alternatives diferents per a protegir l'agent en funció de si és vol només detectar l'atac o evitar-lo en temps real. Dues d'aquestes propostes es centren en la protecció de sistemes de detecció d'intrusions basats en agents mòbils. Cadascuna de les solucions té diverses implicacions a nivell d'infrastructura i de complexitat.Postprint (published version

New Coding/Decoding Techniques for Wireless Communication Systems

Wireless communication encompasses cellular telephony systems (mobile communication), wireless sensor networks, satellite communication systems and many other applications. Studies relevant to wireless communication deal with maintaining reliable and efficient exchange of information between the transmitter and receiver over a wireless channel. The most practical approach to facilitate reliable communication is using channel coding. In this dissertation we propose novel coding and decoding approaches for practical wireless systems. These approaches include variable-rate convolutional encoder, modified turbo decoder for local content in Single-Frequency Networks, and blind encoder parameter estimation for turbo codes. On the other hand, energy efficiency is major performance issue in wireless sensor networks. In this dissertation, we propose a novel hexagonal-tessellation based clustering and cluster-head selection scheme to maximize the lifetime of a wireless sensor network. For each proposed approach, the system performance evaluation is also provided. In this dissertation the reliability performance is expressed in terms of bit-error-rate (BER), and the energy efficiency is expressed in terms of network lifetime

Error-efficient computing systems

This survey explores the theory and practice of techniques to make computing systems faster or more energy-efficient by allowing them to make controlled errors. In the same way that systems which only use as much energy as necessary are referred to as being energy-efficient, you can think of the class of systems addressed by this survey as being error-efficient: They only prevent as many errors as they need to. The definition of what constitutes an error varies across the parts of a system. And the errors which are acceptable depend on the application at hand. In computing systems, making errors, when behaving correctly would be too expensive, can conserve resources. The resources conserved may be time: By making some errors, systems may be faster. The resource may also be energy: A system may use less power from its batteries or from the electrical grid by only avoiding certain errors while tolerating benign errors that are associated with reduced power consumption. The resource in question may be an even more abstract quantity such as consistency of ordering of the outputs of a system. This survey is for anyone interested in an end-to-end view of one set of techniques that address the theory and practice of making computing systems more efficient by trading errors for improved efficiency