Systematic energy characterization of CMP/SMT processor systems via automated micro-benchmarks

Microprocessor-based systems today are composed of multi-core, multi-threaded processors with complex cache hierarchies and gigabytes of main memory. Accurate characterization of such a system, through predictive pre-silicon modeling and/or diagnostic postsilicon measurement based analysis are increasingly cumbersome and error prone. This is especially true of energy-related characterization studies. In this paper, we take the position that automated micro-benchmarks generated with particular objectives in mind hold the key to obtaining accurate energy-related characterization. As such, we first present a flexible micro-benchmark generation framework (MicroProbe) that is used to probe complex multi-core/multi-threaded systems with a variety and range of energy-related queries in mind. We then present experimental results centered around an IBM POWER7 CMP/SMT system to demonstrate how the systematically generated micro-benchmarks can be used to answer three specific queries: (a) How to project application-specific (and if needed, phase-specific) power consumption with component-wise breakdowns? (b) How to measure energy-per-instruction (EPI) values for the target machine? (c) How to bound the worst-case (maximum) power consumption in order to determine safe, but practical (i.e. affordable) packaging or cooling solutions? The solution approaches to the above problems are all new. Hardware measurement based analysis shows superior power projection accuracy (with error margins of less than 2.3% across SPEC CPU2006) as well as max-power stressing capability (with 10.7% increase in processor power over the very worst-case power seen during the execution of SPEC CPU2006 applications).Peer ReviewedPostprint (author’s final draft

Active timing margin management to improve microprocessor power efficiency

Improving power/performance efficiency is critical for today’s micro- processors. From edge devices to datacenters, lower power or higher performance always produces better systems, measured by lower cost of ownership or longer battery time. This thesis studies improving microprocessor power/performance efficiency by optimizing the pipeline timing margin. In particular, this thesis focuses on improving the efficacy of Active Timing Margin, a young technology that dynamically adjusts the margin. Active timing margin trims down the pipeline timing margin with a control loop that adjusts voltage and frequency based on real-time chip environment monitoring. The key insight of this thesis is that in order to maximize active timing margin’s efficiency enhancement benefits, synergistic management from processor architecture design and system software scheduling are needed. To that end, this thesis covers the major consumers of pipeline timing margin, including temperature, voltage, and process variation. For temperature variation, the thesis proposes a table-lookup based active timing margin mechanism, and an associated temperature management scheme to minimize power consumption. For voltage variation, the thesis characterizes the limiting factors of adaptive clocking’s power saving and proposes application scheduling to maximize total system power reduction. For process variation, the thesis proposes core-level adaptive clocking reconfiguration to automatically expose inter-core variation and discusses workload scheduling and throttling management to control critical application performance. The author believes the optimization presented in this thesis can potentially benefit a variety of processor architectures as the conclusions are based on the solid measurement on state-of-the-art processors, and the research objective, active timing margin, already has wide applicability in the latest microprocessors by the time this thesis is written.Electrical and Computer Engineerin

Performance and power optimizations in chip multiprocessors for throughput-aware computation

The so-called "power (or power density) wall" has caused core frequency (and single-thread performance) to slow down, giving rise to the era of multi-core/multi-thread processors. For example, the IBM POWER4 processor, released in 2001, incorporated two single-thread cores into the same chip. In 2010, IBM released the POWER7 processor with eight 4-thread cores in the same chip, for a total capacity of 32 execution contexts. The ever increasing number of cores and threads gives rise to new opportunities and challenges for software and hardware architects. At software level, applications can benefit from the abundant number of execution contexts to boost throughput. But this challenges programmers to create highly-parallel applications and operating systems capable of scheduling them correctly. At hardware level, the increasing core and thread count puts pressure on the memory interface, because memory bandwidth grows at a slower pace ---phenomenon known as the "bandwidth (or memory) wall". In addition to memory bandwidth issues, chip power consumption rises due to manufacturers' difficulty to lower operating voltages sufficiently every processor generation. This thesis presents innovations to improve bandwidth and power consumption in chip multiprocessors (CMPs) for throughput-aware computation: a bandwidth-optimized last-level cache (LLC), a bandwidth-optimized vector register file, and a power/performance-aware thread placement heuristic. In contrast to state-of-the-art LLC designs, our organization avoids data replication and, hence, does not require keeping data coherent. Instead, the address space is statically distributed all over the LLC (in a fine-grained interleaving fashion). The absence of data replication increases the cache effective capacity, which results in better hit rates and higher bandwidth compared to a coherent LLC. We use double buffering to hide the extra access latency due to the lack of data replication. The proposed vector register file is composed of thousands of registers and organized as an aggregation of banks. We leverage such organization to attach small special-function "local computation elements" (LCEs) to each bank. This approach ---referred to as the "processor-in-regfile" (PIR) strategy--- overcomes the limited number of register file ports. Because each LCE is a SIMD computation element and all of them can proceed concurrently, the PIR strategy constitutes a highly-parallel super-wide-SIMD device (ideal for throughput-aware computation). Finally, we present a heuristic to reduce chip power consumption by dynamically placing software (application) threads across hardware (physical) threads. The heuristic gathers chip-level power and performance information at runtime to infer characteristics of the applications being executed. For example, if an application's threads share data, the heuristic may decide to place them in fewer cores to favor inter-thread data sharing and communication. In such case, the number of active cores decreases, which is a good opportunity to switch off the unused cores to save power. It is increasingly harder to find bulletproof (micro-)architectural solutions for the bandwidth and power scalability limitations in CMPs. Consequently, we think that architects should attack those problems from different flanks simultaneously, with complementary innovations. This thesis contributes with a battery of solutions to alleviate those problems in the context of throughput-aware computation: 1) proposing a bandwidth-optimized LLC; 2) proposing a bandwidth-optimized register file organization; and 3) proposing a simple technique to improve power-performance efficiency.El excesivo consumo de potencia de los procesadores actuales ha desacelerado el incremento en la frecuencia operativa de los mismos para dar lugar a la era de los procesadores con múltiples núcleos y múltiples hilos de ejecución. Por ejemplo, el procesador POWER7 de IBM, lanzado al mercado en 2010, incorpora ocho núcleos en el mismo chip, con cuatro hilos de ejecución por núcleo. Esto da lugar a nuevas oportunidades y desafíos para los arquitectos de software y hardware. A nivel de software, las aplicaciones pueden beneficiarse del abundante número de núcleos e hilos de ejecución para aumentar el rendimiento. Pero esto obliga a los programadores a crear aplicaciones altamente paralelas y sistemas operativos capaces de planificar correctamente la ejecución de las mismas. A nivel de hardware, el creciente número de núcleos e hilos de ejecución ejerce presión sobre la interfaz de memoria, ya que el ancho de banda de memoria crece a un ritmo más lento. Además de los problemas de ancho de banda de memoria, el consumo de energía del chip se eleva debido a la dificultad de los fabricantes para reducir suficientemente los voltajes de operación entre generaciones de procesadores. Esta tesis presenta innovaciones para mejorar el ancho de banda y consumo de energía en procesadores multinúcleo en el ámbito de la computación orientada a rendimiento ("throughput-aware computation"): una memoria caché de último nivel ("last-level cache" o LLC) optimizada para ancho de banda, un banco de registros vectorial optimizado para ancho de banda, y una heurística para planificar la ejecución de aplicaciones paralelas orientada a mejorar la eficiencia del consumo de potencia y desempeño. En contraste con los diseños de LLC de última generación, nuestra organización evita la duplicación de datos y, por tanto, no requiere de técnicas de coherencia. El espacio de direcciones de memoria se distribuye estáticamente en la LLC con un entrelazado de grano fino. La ausencia de replicación de datos aumenta la capacidad efectiva de la memoria caché, lo que se traduce en mejores tasas de acierto y mayor ancho de banda en comparación con una LLC coherente. Utilizamos la técnica de "doble buffering" para ocultar la latencia adicional necesaria para acceder a datos remotos. El banco de registros vectorial propuesto se compone de miles de registros y se organiza como una agregación de bancos. Incorporamos a cada banco una pequeña unidad de cómputo de propósito especial ("local computation element" o LCE). Este enfoque ---que llamamos "computación en banco de registros"--- permite superar el número limitado de puertos en el banco de registros. Debido a que cada LCE es una unidad de cómputo con soporte SIMD ("single instruction, multiple data") y todas ellas pueden proceder de forma concurrente, la estrategia de "computación en banco de registros" constituye un dispositivo SIMD altamente paralelo. Por último, presentamos una heurística para planificar la ejecución de aplicaciones paralelas orientada a reducir el consumo de energía del chip, colocando dinámicamente los hilos de ejecución a nivel de software entre los hilos de ejecución a nivel de hardware. La heurística obtiene, en tiempo de ejecución, información de consumo de potencia y desempeño del chip para inferir las características de las aplicaciones. Por ejemplo, si los hilos de ejecución a nivel de software comparten datos significativamente, la heurística puede decidir colocarlos en un menor número de núcleos para favorecer el intercambio de datos entre ellos. En tal caso, los núcleos no utilizados se pueden apagar para ahorrar energía. Cada vez es más difícil encontrar soluciones de arquitectura "a prueba de balas" para resolver las limitaciones de escalabilidad de los procesadores actuales. En consecuencia, creemos que los arquitectos deben atacar dichos problemas desde diferentes flancos simultáneamente, con innovaciones complementarias

A case for code-representative microbenchmarks

Microbenchmarks are fundamental in the design of a microarchitecture. They allow rapid evaluation of the system, while incurring little exploration overhead. One key design aspect is the thermal design point (TDP), the maximum sustained power that a system will experience in typical conditions. Designers tend to use hand-coded microbenchmarks to provide an estimation for TDP. In this work we make the case for a systematic methodology to automatically generate code-representative microbenchmarks that can be used to drive the TDP estimation

Exceeding Conservative Limits: A Consolidated Analysis on Modern Hardware Margins

Modern large-scale computing systems (data centers, supercomputers, cloud and edge setups and high-end cyber-physical systems) employ heterogeneous architectures that consist of multicore CPUs, general-purpose many-core GPUs, and programmable FPGAs. The effective utilization of these architectures poses several challenges, among which a primary one is power consumption. Voltage reduction is one of the most efficient methods to reduce power consumption of a chip. With the galloping adoption of hardware accelerators (i.e., GPUs and FPGAs) in large datacenters and other large-scale computing infrastructures, a comprehensive evaluation of the safe voltage reduction levels for each different chip can be employed for efficient reduction of the total power. We present a survey of recent studies in voltage margins reduction at the system level for modern CPUs, GPUs and FPGAs. The pessimistic voltage guardbands inserted by the silicon vendors can be exploited in all devices for significant power savings. On average, voltage reduction can reach 12% in multicore CPUs, 20% in manycore GPUs and 39% in FPGAs.Comment: Accepted for publication in IEEE Transactions on Device and Materials Reliabilit

DeepP: Deep Learning Multi-Program Prefetch Configuration for the IBM POWER 8

[EN] Current multi-core processors implement sophisticated hardware prefetchers, that can be configured by application (PID),to improve the system performance. When running multiple applications, each application can present different prefetch requirements,hence different configurations can be used. Setting the optimal prefetch configuration for each application is a complex task since itdoes not only depend on the application characteristics but also on the interference at the shared memory resources (e.g. memorybandwidth). In his paper, we proposeDeepP, a deep learning approach for the IBM POWER8 that identifies at run-time the bestprefetch configuration for each application in a workload. To this end, the neural network predicts the performance of each applicationunder the studied prefetch configurations by using a set of performance events. The prediction accuracy of the network is improvedthanks to a dynamic training methodology that allows learning the impact of dynamic changes of the prefetch configuration onperformance. At run-time, the devised network infers the best prefetch configuration for each application and adjusts it dynamically.Experimental results show that the proposed approach improves performance, on average, by 5,8%, 6,7%, and 15,8% compared tothe default prefetch configuration across different 6-, 8-, and 10-application workloads, respectively.This work was supported in part by Ministerio de Ciencia, Innovacion y Universidades and the European ERDF under Grant RTI2018-098156-B-C51, in part by Generalitat Valenciana under Grant AICO/2021/266, and in part by Ayudas Contratos predoctorales UPV -subprograma 1 (PAID-01-20). The work of Josue Feliu was supported by a Juan de la Cierva Formacion Contract under Grant FJC2018-036021-I.Lurbe-Sempere, M.; Feliu-Pérez, J.; Petit Martí, SV.; Gómez Requena, ME.; Sahuquillo Borrás, J. (2022). DeepP: Deep Learning Multi-Program Prefetch Configuration for the IBM POWER 8. IEEE Transactions on Computers. 71(10):2646-2658. https://doi.org/10.1109/TC.2021.313999726462658711

PRISM: an intelligent adaptation of prefetch and SMT levels

Current microprocessors include hardware to optimize some specifics workloads. In general, these hardware knobs are set on a default configuration on the booting process of the machine. This default behavior cannot be beneficial for all types of workloads and they are not controlled by anyone but the end user, who needs to know what configuration is the best one for the workload running. Some of these knobs are: (1) the Simultaneous MultiThreading level, which specifies the number of threads that can run simultaneously on a physical CPU, and (2) the data prefetch engine, that manages the prefetches on memory. Parallel programming models are here to stay, and one programming model that succeed in allowing programmers to easily parallelize applications is Open Multi Processing (OMP). Also, the architecture of microprocessors is getting more complex that end users cannot afford to optimize their workloads for all the architectural details. These architectural knobs can help to increase performance but it is needed an automatic and adaptive system managing them. In this work we propose an independent library for OpenMP runtimes to increase performance up to 220% (14.7% on average) while reducing dynamic power consumption up to 13% (2% on average) on a real POWER8 processor

Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors

Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above