Self-Partial and Dynamic Reconfiguration Implementation for AES using FPGA

This paper addresses efficient hardware/software implementation approaches for the AES (Advanced Encryption Standard) algorithm and describes the design and performance testing algorithm for embedded system. Also, with the spread of reconfigurable hardware such as FPGAs (Field Programmable Gate Array) embedded cryptographic hardware became cost-effective. Nevertheless, it is worthy to note that nowadays, even hardwired cryptographic algorithms are not so safe. From another side, the self-reconfiguring platform is reported that enables an FPGA to dynamically reconfigure itself under the control of an embedded microprocessor. Hardware acceleration significantly increases the performance of embedded systems built on programmable logic. Allowing a FPGA-based MicroBlaze processor to self-select the coprocessors uses can help reduce area requirements and increase a system's versatility. The architecture proposed in this paper is an optimal hardware implementation algorithm and takes dynamic partially reconfigurable of FPGA. This implementation is good solution to preserve confidentiality and accessibility to the information in the numeric communication

Smart technologies for effective reconfiguration: the FASTER approach

Current and future computing systems increasingly require that their functionality stays flexible after the system is operational, in order to cope with changing user requirements and improvements in system features, i.e. changing protocols and data-coding standards, evolving demands for support of different user applications, and newly emerging applications in communication, computing and consumer electronics. Therefore, extending the functionality and the lifetime of products requires the addition of new functionality to track and satisfy the customers needs and market and technology trends. Many contemporary products along with the software part incorporate hardware accelerators for reasons of performance and power efficiency. While adaptivity of software is straightforward, adaptation of the hardware to changing requirements constitutes a challenging problem requiring delicate solutions. The FASTER (Facilitating Analysis and Synthesis Technologies for Effective Reconfiguration) project aims at introducing a complete methodology to allow designers to easily implement a system specification on a platform which includes a general purpose processor combined with multiple accelerators running on an FPGA, taking as input a high-level description and fully exploiting, both at design time and at run time, the capabilities of partial dynamic reconfiguration. The goal is that for selected application domains, the FASTER toolchain will be able to reduce the design and verification time of complex reconfigurable systems providing additional novel verification features that are not available in existing tool flows

Architecture and Design of Medical Processor Units for Medical Networks

This paper introduces analogical and deductive methodologies for the design medical processor units (MPUs). From the study of evolution of numerous earlier processors, we derive the basis for the architecture of MPUs. These specialized processors perform unique medical functions encoded as medical operational codes (mopcs). From a pragmatic perspective, MPUs function very close to CPUs. Both processors have unique operation codes that command the hardware to perform a distinct chain of subprocesses upon operands and generate a specific result unique to the opcode and the operand(s). In medical environments, MPU decodes the mopcs and executes a series of medical sub-processes and sends out secondary commands to the medical machine. Whereas operands in a typical computer system are numerical and logical entities, the operands in medical machine are objects such as such as patients, blood samples, tissues, operating rooms, medical staff, medical bills, patient payments, etc. We follow the functional overlap between the two processes and evolve the design of medical computer systems and networks.Comment: 17 page

A run time adaptive architecture to trade-off performance for fault tolerance applied to a DVB on-board processor

Reliability is one of the key issues in space applications. Although highly flexible and generally less expensive than predominantly used ASICs, SRAM-based FPGAs are very susceptible to radiation effects. Hence, various fault tolerant techniques have to be applied in order to handle faults and protect the design. This paper presents a reconfigurable on-board processor capable of run-time adaptation to harsh environmental conditions and different functional demands. Run-time reconfigurability is achieved applying two different reconfiguration methodologies. We propose a novel self-reconfigurable architecture able to on demand duplicate or triplicate part of the design in order to form DMR and TMR structures. Moreover, we introduce two different approaches for voting the correct output. The first one is a traditional voter that adapts to different DMR/TMR domain positions whereas the second implies comparing the captured flip-flop values directly from the configuration memory read through ICAP. The comparison is done periodically by an embedded processor thus completely excluding the voting mechanism in hardware. The proposed run-time reconfiguration methodology provides savings in terms of device utilization, reconfiguration time, power consumption and significant reductions in the amount of rad-hard memory used by partial configurations

A design for testability study on a high performance automatic gain control circuit.

A comprehensive testability study on a commercial automatic gain control circuit is presented which aims to identify design for testability (DfT) modifications to both reduce production test cost and improve test quality. A fault simulation strategy based on layout extracted faults has been used to support the study. The paper proposes a number of DfT modifications at the layout, schematic and system levels together with testability. Guidelines that may well have generic applicability. Proposals for using the modifications to achieve partial self test are made and estimates of achieved fault coverage and quality levels presente

A novel partial reconfiguration methodology for FPGAs of multichip systems

A number of SRAM-based field programmable gate arrays (FPGAs) allow for partial reconfiguration (PR). Partial reconfiguration can be used to maximize the resource utilization in these FPGAs. Any large design usually consists of many modular features that are never used all concurrently. An FPGA does not need to implement all these features at the same time provided that it can be reconfigured in a reasonable amount of time to implement the features that can be used simultaneously. The use of partial reconfiguration is ideal in this case, since it allows for just the features that are no longer needed to be replaced by the newly required features. Current methodologies use both external and self partial reconfiguration for this purpose. On mature multichip (MC) systems that have not made use of the PR features of their SRAM-based FPGA(s), however, these methodologies would require changes in the existing FPGA configuration protocol and/or associated hardware outside the array. This thesis presents a novel methodology that makes PR features available to these systems for the purpose of maximizing their FPGA resources without the modifications required by the current methodologies. The proposed methodology reuses an existing data interface to send the PR data to the array and directs this data to the FPGA’s internal configuration port. A prototype of this methodology is demonstrated on a commercial color space conversion (CSC) engine design using two Xilinx Virtex-II Pro FPGAs. In addition, the effectiveness of the proposed methodology is quantified by comparing the FPGA resource utilization of the original CSC engine design and that of the partial reconfigurable prototype above. Finally, since the application of partial reconfiguration inherently adds latency to the output of any design, the effects of the proposed methodology on the performance of the CSC engine are also studied and reported. This information will show that reconfiguring and loading the prototyped CSC engine in addition to processing a full image in it takes 683ms, which is within the target of one second