221 research outputs found

    NOVEL RESOURCE EFFICIENT CIRCUIT DESIGNS FOR REBOOTING COMPUTING

    Get PDF
    CMOS based computing is reaching its limits. To take computation beyond Moores law (the number of transistors and hence processing power on a chip doubles every 18 months to 3 years) requires research explorations in (i) new materials, devices, and processes, (ii) new architectures and algorithms, (iii) new paradigm of logic bit representation. The focus is on fundamental new ways to compute under the umbrella of rebooting computing such as spintronics, quantum computing, adiabatic and reversible computing. Therefore, this thesis highlights explicitly Quantum computing and Adiabatic logic, two new computing paradigms that come under the umbrella of rebooting computing. Quantum computing is investigated for its promising application in high-performance computing. The first contribution of this thesis is the design of two resource-efficient designs for quantum integer division. The first design is based on non-restoring division algorithm and the second one is based on restoring division algorithm. Both the designs are compared and shown to be superior to the existing work in terms of T-count and T-depth. The proliferation of IoT devices which work on low-power also has drawn interests to the rebooting computing. Hence, the second contribution of this thesis is proving that Adiabatic Logic is a promising candidate for implementation in IoT devices. The adiabatic logic family called Symmetric Pass Gate Adiabatic Logic (SPGAL) is implemented in PRESENT-80 lightweight algorithm. Adiabatic Logic is extended to emerging transistor devices

    Robustness of Power Analysis Attack Resilient Adiabatic Logic: WCS-QuAL under PVT Variations

    Get PDF
    In this paper, we propose Without Charge Sharing Quasi Adiabatic Logic (WCS-QuAL) as a countermeasure against Power Analysis Attacks. We evaluate and compare our logic with the recently proposed secure adiabatic logic designs SPGAL and EE-SPFAL at frequencies ranging from 1MHz to 100MHz. Simulation results show that WCS-QuAL outperforms the existing secure adiabatic logic designs on the basis of % Normalized Energy Deviation (NED) and % Normalized Standard Deviation (NSD) at all simulated frequencies. Also, all 2-input gates using WCS-QuAL dissipate nearly equal energy for all possible input transitions. In addition, the energy dissipated by WCS-QuAL approaches to the energy dissipation of EESPFAL and SPGAL as the output load capacitance is increased above 100fF. To further evaluate and compare the performance, GF (24) bit-parallel multiplier was implemented as a design example. The impact of Process-Voltage-Temperature (PVT) variations, power supply scaling and technology on the performance of the three logic designs was investigated and compared. Simulation results show that WCS-QuAL passed the functionality test against PVT variations and can perform well against the power supply scaling (from 1.8V to 0.5V). It also exhibits the least value of %NED and %NSD against PVT variations and when the power supply is scaled down compared to EE-SPFAL and SPGAL. At lower technology, WCS-QuAL, shows more improvement in energy dissipation than EE-SPFAL

    Combining Approximate Computing And Adiabatic Logic For Low-Power And Energy-Efficient Iot Edge Computing

    Get PDF
    The growing data-intensive applications that run on IoT edge devices require the circuit to be low-power consumption and energy-efficient for limited resources. As conventional Complementary Metal-Oxide-Semiconductor (CMOS) scales down to the nanometer technology node, it reaches its limits, such as leakage and power consumption. Adiabatic logic and approximate computing are emerging techniques for the low-power circuit. Adiabatic logic can recycle energy which is a promising solution for building energy-efficient circuits. However, the power clock scheme and dual-rail structure of adiabatic logic increase the overall area. Power consumption is further reduced by applying approximate computing while reducing the complexity and size of the circuit. Therefore, to investigate the benefits of approximate computing combined with adiabatic logic, we propose two adiabatic logic based approximate adders. The proposed approximate adders use the advantage of dual-rail logic to shrink the overall size and reduce energy consumption. The two proposed designs are True Sum Approximate Adder (TSAA) and True Carry-out Approximate Adder (TCAA). TSAA approximates the Carryout based on the accurate Sum, and TCAA approximates the Sum based on the precise Carryout. We performed simulations using 45nm technology in Cadence Spectre. Comparing with CMOS based accurate mirror adder (AMA) at 100 MHz, a power-saving of 83.26% and energy saving of 66.54% in PFAL based TSAA (PFAL: Positive Feedback Adiabatic Logic) is achieved. Further, we achieved a power saving of 87.22% and an energy saving of 74.43% in PFAL based TCAA compared to CMOS based accurate mirror adder (AMA). It is illustrated that PFAL based TCAA consumes 24.0% less power and energy per cycle compared to PFAL based TSAA. Further, we have proposed the True Sum Approximate Adder (TSAA) and the True Carry-out Approximate Adder (TCAA) that are energy-efficient and secured against DPA attacks. At 12.5 MHz operating frequency and 45 nm technology node, the DPA-resistant adiabatic TSAA and TCAA achieved power savings of 95.4% and 95.48%, energy savings of 90.80%, and 90.96% in comparison with the standard CMOS AMA

    Cybersecurity and Quantum Computing: friends or foes?

    Get PDF
    L'abstract è presente nell'allegato / the abstract is in the attachmen

    Understanding Quantum Technologies 2022

    Full text link
    Understanding Quantum Technologies 2022 is a creative-commons ebook that provides a unique 360 degrees overview of quantum technologies from science and technology to geopolitical and societal issues. It covers quantum physics history, quantum physics 101, gate-based quantum computing, quantum computing engineering (including quantum error corrections and quantum computing energetics), quantum computing hardware (all qubit types, including quantum annealing and quantum simulation paradigms, history, science, research, implementation and vendors), quantum enabling technologies (cryogenics, control electronics, photonics, components fabs, raw materials), quantum computing algorithms, software development tools and use cases, unconventional computing (potential alternatives to quantum and classical computing), quantum telecommunications and cryptography, quantum sensing, quantum technologies around the world, quantum technologies societal impact and even quantum fake sciences. The main audience are computer science engineers, developers and IT specialists as well as quantum scientists and students who want to acquire a global view of how quantum technologies work, and particularly quantum computing. This version is an extensive update to the 2021 edition published in October 2021.Comment: 1132 pages, 920 figures, Letter forma

    Quantum Algorithms for Solving Hard Constrained Optimization Problems

    Get PDF
    En aquesta investigació, s'han examinat tècniques d'optimització per resoldre problemes de restriccions i s'ha fet un estudi de l'era quàntica i de les empreses líders del mercat, com ara IBM, D-Wave, Google, Xanadu, AWS-Braket i Microsoft. S'ha après sobre la comunitat, les plataformes, l'estat de les investigacions i s'han estudiat els postulats de la mecànica quàntica que serveixen per crear els sistemes i algorismes quàntics més eficients. Per tal de saber si és possible resoldre problemes de Problema de cerca de restriccions (CSP) de manera més eficient amb la computació quàntica, es va definir un escenari perquè tant la computació clàssica com la quàntica tinguessin un bon punt de referència. En primer lloc, la prova de concepte es centra en el problema de programació dels treballadors socials i més tard en el tema de la preparació per lots i la selecció de comandes com a generalització del Problema dels treballadors socials (SWP). El problema de programació dels treballadors socials és una mena de problema d'optimització combinatòria que, en el millor dels casos, es pot resoldre en temps exponencial; veient que el SWP és NP-Hard, proposa fer servir un altre enfoc més enllà de la computació clàssica per a la seva resolució. Avui dia, el focus a la computació quàntica ja no és només per la seva enorme capacitat informàtica sinó també, per l'ús de la seva imperfecció en aquesta era Noisy Intermediate-Scale Quantum (NISQ) per crear un poderós dispositiu d'aprenentatge automàtic que utilitza el principi variacional per resoldre problemes d'optimització en reduir la classe de complexitat. A la tesi es proposa una formulació (quadràtica) per resoldre el problema de l'horari dels treballadors socials de manera eficient utilitzant Variational Quantum Eigensolver (VQE), Quantum Approximate Optimization Algorithm (QAOA), Minimal Eigen Optimizer i ADMM optimizer. La viabilitat quàntica de l'algorisme s'ha modelat en forma QUBO, amb Docplex simulat Cirq, Or-Tools i provat a ordinadors IBMQ. Després d'analitzar els resultats de l'enfocament anterior, es va dissenyar un escenari per resoldre el SWP com a raonament basat en casos (qCBR), tant quànticament com clàssicament. I així poder contribuir amb un algorisme quàntic centrat en la intel·ligència artificial i l'aprenentatge automàtic. El qCBR és una tècnica d’aprenentatge automàtic basada en la resolució de nous problemes que utilitza l’experiència, com ho fan els humans. L'experiència es representa com una memòria de casos que conté qüestions prèviament resoltes i utilitza una tècnica de síntesi per adaptar millor l'experiència al problema nou. A la definició de SWP, si en lloc de pacients es tenen lots de comandes i en lloc de treballadors socials robots mòbils, es generalitza la funció objectiu i les restriccions. Per això, s'ha proposat una prova de concepte i una nova formulació per resoldre els problemes de picking i batching anomenat qRobot. Es va fer una prova de concepte en aquesta part del projecte mitjançant una Raspberry Pi 4 i es va provar la capacitat d'integració de la computació quàntica dins de la robòtica mòbil, amb un dels problemes més demandats en aquest sector industrial: problemes de picking i batching. Es va provar en diferents tecnologies i els resultats van ser prometedors. A més, en cas de necessitat computacional, el robot paral·lelitza part de les operacions en computació híbrida (quàntica + clàssica), accedint a CPU i QPU distribuïts en un núvol públic o privat. A més, s’ha desenvolupat un entorn estable (ARM64) dins del robot (Raspberry) per executar operacions de gradient i altres algorismes quàntics a IBMQ, Amazon Braket (D-Wave) i Pennylane de forma local o remota. Per millorar el temps d’execució dels algorismes variacionals en aquesta era NISQ i la següent, s’ha proposat EVA: un algorisme d’aproximació de Valor Exponencial quàntic. Fins ara, el VQE és el vaixell insígnia de la computació quàntica. Avui dia, a les plataformes líders del mercat de computació quàntica al núvol, el cost de l'experimentació dels circuits quàntics és proporcional al nombre de circuits que s'executen en aquestes plataformes. És a dir, amb més circuits més cost. Una de les coses que aconsegueix el VQE, el vaixell insígnia d'aquesta era de pocs qubits, és la poca profunditat en dividir el Hamiltonià en una llista de molts petits circuits (matrius de Pauli). Però aquest mateix fet, fa que simular amb el VQE sigui molt car al núvol. Per aquesta mateixa raó, es va dissenyar EVA per poder calcular el valor esperat amb un únic circuit. Tot i haver respost a la hipòtesi d'aquesta tesis amb tots els estudis realitzats, encara es pot continuar investigant per proposar nous algorismes quàntics per millorar problemes d'optimització.En esta investigación, se han examinado técnicas de optimización para resolver problemas de restricciones y se ha realizado un estudio de la era cuántica y de las empresas lideres del mercado, como IBM, D-Wave, Google, Xanadu, AWS-Braket y Microsoft. Se ha aprendido sobre su comunidad, sus plataformas, el estado de sus investigaciones y se han estudiado los postulados de la mecánica cuántica que sirven para crear los sistemas y algoritmos cuánticos más eficientes. Por tal de saber si es posible resolver problemas de Problema de búsqueda de restricciones (CSP) de manera más eficiente con la computación cuántica, se definió un escenario para que tanto la computación clásica como la cuántica tuvieran un buen punto de referencia. En primer lugar, la prueba de concepto se centra en el problema de programación de los trabajadores sociales y más tarde en el tema de la preparación por lotes y la selección de pedidos como una generalización del Problema de los trabajadores sociales (SWP). El problema de programación de los trabajadores sociales es una clase de problema de optimización combinatoria que, en el mejor de los casos, puede resolverse en tiempo exponencial; viendo que el SWP es NP-Hard, propone usar otro enfoque mas allá de la computación clásica para su resolución. Hoy en día, el foco en la computación cuántica ya no es sólo por su enorme capacidad informática sino también, por el uso de su imperfección en esta era Noisy Intermediate-Scale Quantum (NISQ) para crear un poderoso dispositivo de aprendizaje automático que usa el principio variacional para resolver problemas de optimización al reducir su clase de complejidad. En la tesis se propone una formulación (cuadrática) para resolver el problema del horario de los trabajadores sociales de manera eficiente usando Variational Quantum Eigensolver (VQE), Quantum Approximate Optimization Algorithm (QAOA), Minimal Eigen Optimizer y ADMM optimizer. La viabilidad cuántica del algoritmo se ha modelado en forma QUBO, con Docplex simulado Cirq, Or-Tools y probado en computadoras IBMQ. Después de analizar los resultados del enfoque anterior, se diseñó un escenario para resolver el SWP como razonamiento basado en casos (qCBR), tanto cuántica como clásicamente. Y así, poder contribuir con un algoritmo cuántico centrado en la inteligencia artificial y el aprendizaje automático. El qCBR es una técnica de aprendizaje automático basada en la resolución de nuevos problemas que utiliza la experiencia, como lo hacen los humanos. La experiencia se representa como una memoria de casos que contiene cuestiones previamente resueltas y usa una técnica de síntesis para adaptar mejor la experiencia al nuevo problema. En la definición de SWP, si en lugar de pacientes se tienen lotes de pedidos y en lugar de trabajadores sociales robots móviles, se generaliza la función objetivo y las restricciones. Para ello, se ha propuesto una prueba de concepto y una nueva formulación para resolver los problemas de picking y batching llamado qRobot. Se hizo una prueba de concepto en esta parte del proyecto a través de una Raspberry Pi 4 y se probó la capacidad de integración de la computación cuántica dentro de la robótica móvil, con uno de los problemas más demandados en este sector industrial: problemas de picking y batching. Se probó en distintas tecnologías y los resultados fueron prometedores. Además, en caso de necesidad computacional, el robot paraleliza parte de las operaciones en computación híbrida (cuántica + clásica), accediendo a CPU y QPU distribuidos en una nube pública o privada. Además, desarrollamos un entorno estable (ARM64) dentro del robot (Raspberry) para ejecutar operaciones de gradiente y otros algoritmos cuánticos en IBMQ, Amazon Braket (D-Wave) y Pennylane de forma local o remota. Para mejorar el tiempo de ejecución de los algoritmos variacionales en esta era NISQ y la siguiente, se ha propuesto EVA: un algoritmo de Aproximación de Valor Exponencial cuántico. Hasta la fecha, el VQE es el buque insignia de la computación cuántica. Hoy en día, en las plataformas de computación cuántica en la nube líderes de mercado, el coste de la experimentación de los circuitos cuánticos es proporcional al número de circuitos que se ejecutan en dichas plataformas. Es decir, con más circuitos mayor coste. Una de las cosas que consigue el VQE, el buque insignia de esta era de pocos qubits, es la poca profundidad al dividir el Hamiltoniano en una lista de muchos pequeños circuitos (matrices de Pauli). Pero este mismo hecho, hace que simular con el VQE sea muy caro en la nube. Por esta misma razón, se diseñó EVA para poder calcular el valor esperado con un único circuito. Aún habiendo respuesto a la hipótesis de este trabajo con todos los estudios realizados, todavía se puede seguir investigando para proponer nuevos algoritmos cuánticos para mejorar problemas de optimización combinatoria.In this research, Combinatorial optimization techniques to solve constraint problems have been examined. A study of the quantum era and market leaders such as IBM, D-Wave, Google, Xanadu, AWS-Braket and Microsoft has been carried out. We have learned about their community, their platforms, the status of their research, and the postulates of quantum mechanics that create the most efficient quantum systems and algorithms. To know if it is possible to solve Constraint Search Problem (CSP) problems more efficiently with quantum computing, a scenario was defined so that both classical and quantum computing would have a good point of reference. First, the proof of concept focuses on the social worker scheduling problem and later on the issue of batch picking and order picking as a generalization of the Social Workers Problem (SWP). The social workers programming problem is a combinatorial optimization problem that can be solved exponentially at best; seeing that the SWP is NP-Hard, it claims using another approach beyond classical computation for its resolution. Today, the focus on quantum computing is no longer only on its enormous computing power but also on the use of its imperfection in this era Noisy Intermediate-Scale Quantum (NISQ) to create a powerful machine learning device that uses the variational principle to solve optimization problems by reducing their complexity class. In the thesis, a (quadratic) formulation is proposed to solve the problem of social workers' schedules efficiently using Variational Quantum Eigensolver (VQE), Quantum Approximate Optimization Algorithm (QAOA), Minimal Eigen Optimizer and ADMM optimizer. The quantum feasibility of the algorithm has been modelled in QUBO form, with Cirq simulated, Or-Tools and tested on IBMQ computers. After analyzing the results of the above approach, a scenario was designed to solve the SWP as quantum case-based reasoning (qCBR), both quantum and classically. And thus, to be able to contribute with a quantum algorithm focused on artificial intelligence and machine learning. The qCBR is a machine learning technique based on solving new problems that use experience, as humans do. The experience is represented as a memory of cases containing previously resolved questions and uses a synthesis technique to adapt the background to the new problem better. In the definition of SWP, if instead of patients there are batches of orders and instead of social workers mobile robots, the objective function and the restrictions are generalized. To do this, a proof of concept and a new formulation has been proposed to solve the problems of picking and batching called qRobot. A proof of concept was carried out in this part of the project through a Raspberry Pi 4 and the integration capacity of quantum computing within mobile robotics was tested, with one of the most demanded problems in this industrial sector: picking and batching problems. It was tested on different technologies, and the results were promising. Furthermore, in case of computational need, the robot parallelizes part of the operations in hybrid computing (quantum + classical), accessing CPU and QPU distributed in a public or private cloud. Furthermore, we developed a stable environment (ARM64) inside the robot (Raspberry) to run gradient operations and other quantum algorithms on IBMQ, Amazon Braket (D-Wave) and Pennylane locally or remotely. To improve the execution time of variational algorithms in this NISQ era and the next, EVA has been proposed: A quantum Exponential Value Approximation algorithm. To date, the VQE is the flagship of quantum computing. Today, in the market-leading quantum cloud computing platforms, the cost of experimenting with quantum circuits is proportional to the number of circuits running on those platforms. That is, with more circuits, higher cost. One of the things that the VQE, the flagship of this low-qubit era, achieves is shallow depth by dividing the Hamiltonian into a list of many small circuits (Pauli matrices). But this very fact makes simulating with VQE very expensive in the cloud. For this same reason, EVA was designed to calculate the expected value with a single circuit. Even having answered the hypothesis of this work with all the studies carried out, it is still possible to continue research to propose new quantum algorithms to improve combinatorial optimization
    corecore