Application of Odometry and Dijkstra Algorithm as Navigation and Shortest Path Determination System of Warehouse Mobile Robot

One of the technologies in the industrial world that utilizes robots is the delivery of goods in warehouses, especially in the goods distribution process. This is very useful, especially in terms of resource efficiency and reducing human error. The existing system in this process usually uses the line follower concept on the robot's path with a camera sensor to determine the destination location. If the line and destination are not detected by the sensor or camera, the robot's navigation system will experience an error. it can happen if the sensor is dirty or the track is faded. The aim of this research is to develop a robot navigation system for efficient goods delivery in warehouses by integrating odometry and Dijkstra's algorithm for path planning. Holonomic robot is a robot that moves freely without changing direction to produce motion with high mobility. Dijkstra's algorithm is added to the holonomic robot to obtain the fastest trajectory. by calculating the distance of the node that has not been passed from the initial position, if in the calculation the algorithm finds a shorter distance it will be stored as a new route replacing the previously recorded route. the distance traversed by the djikstra algorithm is 780 mm while a distance of 1100 mm obtains the other routes. The time for using the Djikstra method is proven to be 5.3 seconds faster than the track without the Djikstra method with the same speed. Uneven track terrain can result in a shift in the robot's position so that it can affect the travel data. The conclusion is that odometry and Dijkstra's algorithm as a planning system and finding the shortest path are very efficient for warehouse robots to deliver goods than ordinary line followers without Dijkstra, both in terms of distance and travel time

Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Formation control of multiple mobile robots using parametric and implicit representations

Coordination of autonomous robot groups is an active research area and much recent work has focused on modeling and control issues related to coordination. Robot groups can coordinate in many different ways. Some robot groups may execute coordination in which group members move in a scattered manner like the bees of a beehive or coordination of the group may require a more strict formation like the swallows. The shape formation is very important for the coordination of autonomous mobile robot groups because it increases the capability of a robot group by increasing the competence and the security of the group. The shape formation is applicable in many tasks like formation flight, flocking and schooling, transportation systems, searchand- rescue operations, competitive games, reconnaissance and surveillance. This thesis develops a flexible shape formation control method for autonomous mobile robots. There are different approaches in the literature for shape formation of mobile robots. Proposed method is different from these existing approaches by being applicable to complex formation curves as well as different number of robots and heterogeneous groups. It consists of two phases. In the first phase, shape formation is controlled by using potential fields generated from implicit polynomial representations and in the second phase, the control for keeping the desired shape is designed using elliptical Fourier descriptors. In this shape formation method, coordination between the robots is modeled using virtual linear springs between each robot and its nearest two neighbors. The success of the proposed method is shown through simulations on groups of different numbers of point-particle robots. Proposed method is then extended to non-holonomic mobile robots by using the desired positions in point particle model as references for the non-holonomic robots. The method is also implemented with real non-holonomic robots with a bird-eye-view camera

Coordinated multi-robot formation control

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201

Real-time trajectory generation for dynamic systems with nonholonomic constraints using Player/Stage and NTG.

This thesis will present various methods of trajectory generation for various types of mobile robots. Then it will progress to evaluating Robot Operating Systems (ROS’s) that can be used to control and simulate mobile robots, and it will explain why Player/Stage was chosen as the ROS for this thesis. It will then discuss Nonlinear Trajectory Generation as the main method for producing a path for mobile robots with dynamic and kinematic constraints. Finally, it will combine Player, Stage, and NTG into a system that produces a trajectory in real-time for a mobile robot and simulates a differential drive robot being driven from the initial state to the goal state in the presence of obstacles. Experiments will include the following: Blobfinding for physical and simulated camera systems, position control of physical and simulated differential drive robots, wall following using simulated range sensors, trajectory generation for omnidirectional and differential drive robots, and a combination of blobfinding, position control, and trajectory generation. Each experiment was a success, to varying degrees. The culmination of the thesis will present a real-time trajectory generation and position control method for a differential drive robot in the presence of obstacles

A novel control architecture based on behavior trees for an omni-directional mobile robot

Robotic systems are increasingly present in dynamic environments. This paper proposes a hierarchical control structure wherein a behavior tree (BT) is used to improve the flexibility and adaptability of an omni-directional mobile robot for point stabilization. Flexibility and adaptability are crucial at each level of the sense–plan–act loop to implement robust and effective robotic solutions in dynamic environments. The proposed BT combines high-level decision making and continuous execution monitoring while applying non-linear model predictive control (NMPC) for the point stabilization of an omni-directional mobile robot. The proposed control architecture can guide the mobile robot to any configuration within the workspace while satisfying state constraints (e.g., obstacle avoidance) and input constraints (e.g., motor limits). The effectiveness of the controller was validated through a set of realistic simulation scenarios and experiments in a real environment, where an industrial omni-directional mobile robot performed a point stabilization task with obstacle avoidance in a workspace.This work was financed by national funds from the FCT (Foundation for Science and Technology), I.P., through IDMEC under LAETA, project UIDB\50022\2020. The work of Rodrigo Bernardo was supported by the PhD Scholarship BD\6841\2020 from the FCT. This work indirectly received funding from the European Union’s Horizon 2020 programme under StandICT.eu 2026 (Grant Agreement No. 101091933).info:eu-repo/semantics/publishedVersio

Robotic Search and Rescue through In-Pipe Movement

So far, we have been engaged in the research and development of various kinds of robots that could be applied to in-pipe inspections that existing methods (screw-drive type, parallel multi-modular type, and articulated wheeled type) cannot perform. In this chapter, we categorized each in-pipe inspection robot depending on its configuration and structure, which includes the design of the propulsive mechanism, steering mechanism, stretching mechanism, and the locations of the wheel and joint axes. On the basis of this classification and from a developer’s point of view, we also discussed the various kinds of robots that we have developed, along with their advantages and disadvantages