Implementation of packaged integrated antenna with embedded front end for Bluetooth applications

The design, integration and realization of system in enhanced package approach towards fully functional system level integration by using a compact Bluetooth USB dongle as the demonstrator is presented here. The integration was done on FR4 substrates, which is totally compatible with today’s printed circuit board manufacturing capability. A commercially available Bluetooth integrated chip was chosen as the chipset of our demonstrator, and a package integrated antenna together with an embedded front end completes the system in package integration. The front end developed here is based on an embedded meander line combline filter and an embedded transformer balun. The filter has a 35% area reduction when compared with the classical combline filter and similar performance. The balun has the coils distributed on three layers that minimized the board area needed it and optimizes the performances. The proposed packaged integrated antenna approach is successfully demonstrated here and the new module shows excellent performance when compared with a commercial solution, surpassing the normal Bluetooth class II dongle range which is up to 10 m and increasing the module range up to 120 m without an extra power amplifier

Design of a Finger Ring Antenna for Wireless Sensor Networks

Body-centric communications have become very active area of research due to ever-growing demand of portability. Advanced applications such as; health monitoring, tele-medicine, identification systems, performance monitoring of athletes, defence systems and personal entertainment are adding to its popularity. In this paper, a novel wearable antenna radiating at 5 GHz for the body-centric wireless sensor networks has been presented. The antenna consists of a conventional microstrip patch mounted on a gold base and could be worn in a finger like a ring. CST Microwave Studio is used for modelling, simulation and optimisation of the antenna. The simulated results show that the proposed antenna has a -10 dB bandwidth of 90.3 MHz with peak gain of 6.9 dBi. Good performance in terms of bandwidth, directivity, gain, return loss and radiation characteristics, along with a miniaturised form factor makes it a very well suited candidate for the body-worn wireless sensor applications

A Novel Planar Fractal Antenna with CPW-Feed for Multiband applications

In this paper, a multiband antenna using a novel fractal design is presented. The antenna structure is formed by inscribing a hexagonal slot within a circle. This base structure is then scaled and arranged within the hexagon along its sides without touching the outer structure. The proposed CPW fed, low profile antenna offers good performance in the 1.65-2.59 GHz, 4.16-4.52 GHz and 5.54-6.42 GHz bands and is suitable for GSM 1800/1900, Bluetooth, IMT advanced system and upper WLAN applications. The antenna has been fabricated on a substrate of height 1.6mm and er=4.4 and simulation and experimental results are found to be in good agreement

Single-, Dual- and Triple-band Frequency Reconfigurable Antenna

The paper presents a frequency reconfigurable slot dipole antenna. The antenna is capable of being switched between single-band, dual-band or triple-band operation. The antenna incorporates three pairs of pin-diodes which are located within the dipole arms. The antenna was designed to operate at 2.4 GHz, 3.5 GHz and 5.2 GHz using the aid of CST Microwave Studio. The average measured gains are 1.54, 2.92 and 1.89 dBi for low, mid and high band respectively. A prototype was then constructed in order to verify the performance of the device. A good level of agreement was observed between simulation and measurement

Bandwidth extension of planar antennas using embedded slits for reliable multiband RF communications

In this paper a technique is described to extend the impedance bandwidth of patch antennas without compromising their size. This is accomplished by embedding capacitive slits in the rectangular patch with a truncated ground-plane, and exciting the antenna through a meandered strip-line feed. The proposed antenna was fabricated on standard FR-4 substrate with permittivity of 4.6, thickness of 0.8 mm and loss-tangent of 0.001. The performance of the prototype antenna was verified through measurements. Characteristics of the antenna include an impedance bandwidth of 5.25 GHz (800 MHz–6.05 GHz) for VSWR<2 corresponding to a fractional bandwidth of 153.28%, peak gain of 5.35 dBi, radiation efficiency of 84.12% at 4.45 GHz, and low cross-polarization. These attributes make the antenna applicable for stable and reliable multiband applications in the UHF, L, S and major part of C-bands. The antenna offers advantages of low cost, low profile, ease of manufacturing, durability and conformability

Optimization of patch antennas via multithreaded simulated annealing based design exploration

In this paper, we present a new software framework for the optimization of the design of microstrip patch antennas. The proposed simulation and optimization framework implements a simulated annealing algorithm to perform design space exploration in order to identify the optimal patch antenna design. During each iteration of the optimization loop, we employ the popular MEEP simulation tool to evaluate explored design solutions. To speed up the design space exploration, the software framework is developed to run multiple MEEP simulations concurrently. This is achieved using multithreading to implement a manager-workers execution strategy. The number of worker threads is the same as the number of cores of the computer that is utilized. Thus, the computational runtime of the proposed software framework enables effective design space exploration. Simulations demonstrate the effectiveness of the proposed software framework

Genetic Algorithm Optimization of a High-Directivity Microstrip Patch Antenna Having a Rectangular Profile

A single high-directivity microstrip patch antenna (MPA) having a rectangular profile, which can substitute a linear array is proposed. It is designed by using genetic algorithms with the advantage of not requiring a feeding network. The patch fits inside an area of 2.54λ x 0.25λ, resulting in a broadside pattern with a directivity of 12 dBi and a fractional impedance bandwidth of 4%. The antenna is fabricated and the measurements are in good agreement with the simulated results. The genetic MPA provides a similar directivity as linear arrays using a corporate or series feeding, with the advantage that the genetic MPA results in more bandwidth

A Dual Band Belt Antenna

This paper presents an antenna structure design using a standard belt for wearable applications. The antenna arouse from a body of research work on wearable metallic structures functioning as antennas for wireless on-body networks