A Low-Power BFSK/OOK Transmitter for Wireless Sensors

In recent years, significant improvements in semiconductor technology have allowed consistent development of wireless chipsets in terms of functionality and form factor. This has opened up a broad range of applications for implantable wireless sensors and telemetry devices in multiple categories, such as military, industrial, and medical uses. The nature of these applications often requires the wireless sensors to be low-weight and energy-efficient to achieve long battery life. Among the various functions of these sensors, the communication block, used to transmit the gathered data, is typically the most power-hungry block. In typical wireless sensor networks, transmission range is below 10 meters and required radiated power is below 1 milliwatt. In such cases, power consumption of the frequency-synthesis circuits prior to the power amplifier of the transmitter becomes significant. Reducing this power consumption is currently the focus of various research endeavors. A popular method of achieving this goal is using a direct-modulation transmitter where the generated carrier is directly modulated with baseband data using simple modulation schemes. Among the different variations of direct-modulation transmitters, transmitters using unlocked digitally-controlled oscillators and transmitters with injection or resonator-locked oscillators are widely investigated because of their simple structure. These transmitters can achieve low-power and stable operation either with the help of recalibration or by sacrificing tuning capability. In contrast, phase-locked-loop-based (PLL) transmitters are less researched. The PLL uses a feedback loop to lock the carrier to a reference frequency with a programmable ratio and thus achieves good frequency stability and convenient tunability. This work focuses on PLL-based transmitters. The initial goal of this work is to reduce the power consumption of the oscillator and frequency divider, the two most power-consuming blocks in a PLL. Novel topologies for these two blocks are proposed which achieve ultra-low-power operation. Along with measured performance, mathematical analysis to derive rule-of-thumb design approaches are presented. Finally, the full transmitter is implemented using these blocks in a 130 nanometer CMOS process and is successfully tested for low-power operation

Conception d'une bibliothèque et d'un convolueur 3*3TSPC

Méthode de conception d'une bibliothèque TSPC -- Bascules dynamiques synchronisées par des horloges monophasées -- Méthode d'optimisation d'une bibliothèque TSPC -- Méthode d'optimisation de la taille des transistors -- Architecture du convolueur 3*3TSPC -- Fonction au niveau système du convolueur 3*3 -- Conception des cellules de base du convolueur 3*3 TSPC -- Architecture du chemin de données du convolueur 3*3 -- Blocs de test et méthode de conception du convolueur 3*3 -- Bloc "oscillateurs" -- Bloc générateur de vecteurs pseudo-aléatoires -- Bloc "analyse de signature" -- Démultiplexeur de haute performance -- ROM -- Méthode de distribution de l'horloge -- Méthode de placement et routage

High-speed Energy-efficient Soft Error Tolerant Flip-flops

Single event upset (SEU) or soft error caused by alpha particles and cosmic neutrons has emerged as a key reliability concern in nanoscale CMOS technologies. The decrease in signal charge due to the reduction of the operating voltage and node capacitance primarily increases the soft error rate (SER) in integrated circuits. The situation is aggravated by the increasing number of memory elements (e.g., flip-flops) on chip, the lack of inherent error masking mechanisms in these elements, and the below-nominal voltage operation for reducing the power consumption. In fact, limiting the power consumption is critical to enhance the battery life of portable electronic devices. In this thesis, I present several soft error tolerant flip-flops that offer high speed while consuming low power either inherently or through low-energy clocking scheme. The proposed soft error tolerant flip-flops can be divided into two major categories: i) flip-flops with square-wave clock and ii) flip-flops with energy recovery sinusoidal clock, which is very attractive to significantly lower the clock power consumption. The two square-wave clock based proposed flip-flops are: a true single phase clock (TSPC) DICE flip-flop and a clocked precharge soft error robust flip-flop. These flip-flops use fewer transistors and offer as much as 35% lower power-delay-product (PDP) than existing soft error robust pulsed DICE flip-flop. The energy recovery clock based proposed flip-flops are: a soft clock edge SEU hardened (SCESH) flip-flop, C2-DICE flip-flop, a conditional pass Quatro (CPQ) flip-flop, and two energy recovery TSPC flip-flops. These flip-flops exhibit lower PDP ranging from 30% to 69% when compared to the pulsed DICE flip-flop and the single-ended conditional capturing energy recovery (SCCER) flip-flop. Thus, the proposed flip-flops provide a wide range of power and delay choices and as such can be used in a variety of low-power or high performance applications including high-end microprocessors, low-power system-on-chips (SOCs), and implantable medical devices

Integrated Circuit Design for Hybrid Optoelectronic Interconnects

This dissertation focuses on high-speed circuit design for the integration of hybrid optoelectronic interconnects. It bridges the gap between electronic circuit design and optical device design by seamlessly incorporating the compact Verilog-A model for optical components into the SPICE-like simulation environment, such as the Cadence design tool. Optical components fabricated in the IME 130nm SOI CMOS process are characterized. Corresponding compact Verilog-A models for Mach-Zehnder modulator (MZM) device are developed. With this approach, electro-optical co-design and hybrid simulation are made possible. The developed optical models are used for analyzing the system-level specifications of an MZM based optoelectronic transceiver link. Link power budgets for NRZ, PAM-4 and PAM-8 signaling modulations are simulated at system-level. The optimal transmitter extinction ratio (ER) is derived based on the required receiver\u27s minimum optical modulation amplitude (OMA). A limiting receiver is fabricated in the IBM 130 nm CMOS process. By side- by-side wire-bonding to a commercial high-speed InGaAs/InP PIN photodiode, we demonstrate that the hybrid optoelectronic limiting receiver can achieve the bit error rate (BER) of 10-12 with a -6.7 dBm sensitivity at 4 Gb/s. A full-rate, 4-channel 29-1 length parallel PRBS is fabricated in the IBM 130 nm SiGe BiCMOS process. Together with a 10 GHz phase locked loop (PLL) designed from system architecture to transistor level design, the PRBS is demonstrated operating at more than 10 Gb/s. Lessons learned from high-speed PCB design, dealing with signal integrity issue regarding to the PCB transmission line are summarized

A Sub-10ps Time-to-Digital Converter with 204ns Dynamic Range For Time-resolved Imaging and Ranging Applications

Time-resolved quantization has become inherent in systems that incorporate a Time-of-Flight (ToF) or Time-of-Arrival (ToA) measurement. Such systems have diverse applications ranging from direct time-of-flight measurements in 3D ranging systems such as Radar and Lidar systems to imaging systems using Time-Correlated Single Photon Counting (TCSPC) (in fields such as nuclear instrumentation, molecular biology, artificial vision in computer systems, etc.). Time resolution in the order of picoseconds, especially in imaging applications has become important due to the increasing demands on the functionality and accuracy of the DSP (digital signal processing) in such systems. The increasing density of integration in CMOS implementations of such imaging and ranging systems places large constrains on area and power consumption. Furthermore, the increased variability of the range of the measurement quantities introduces an undesirable trade-off between dynamic range and precision/resolution. Therefore there is a need for time-to-digital converters which achieve high precision, high resolution and large dynamic range, without excessive costs in area and power. In this thesis, a wide range, high resolution TDC is designed to offer a timing resolution of less than 10ps and a dynamic range of 204.8ns. This is achieved by using a digitally-intensive hierarchical approach, using two looped structures, which incorporates a novel control logic algorithm. This guarantees accurate operation of the loops, removing the possibility of MSB errors in the digital word. Firstly the measurement is subdivided into 2 different sections: a coarse quantization and a fine quantization. Both of the conversion steps involve the use of a looped delay–line structure utilizing only 4 elements per delay line. This together with the control logic, makes the design of a wide dynamic range TDC achievable without excessive area and power consumption. The design has been simulated, fabricated and tested in the IBM 0.18μm technology. The proposed design achieves a resolution of 8.125ps with an input dynamic range of 204.8ns, a maximum input occurrence rate of 100MHz and a minimum dead time of 7.5ns. The fabricated TDC has a power consumption of < 20mW (1.8V supply; FSR signal at 4MS/s) and < 35mW at the maximum output rate of 100MS/s

Design Automation and Application for Emerging Reconfigurable Nanotechnologies

In the last few decades, two major phenomena have revolutionized the electronic industry – the ever-increasing dependence on electronic circuits and the Complementary Metal Oxide Semiconductor (CMOS) downscaling. These two phenomena have been complementing each other in a way that while electronics, in general, have demanded more computations per functional unit, CMOS downscaling has aptly supported such needs. However, while the computational demand is still rising exponentially, CMOS downscaling is reaching its physical limits. Hence, the need to explore viable emerging nanotechnologies is more imperative than ever. This thesis focuses on streamlining the existing design automation techniques for a class of emerging reconfigurable nanotechnologies. Transistors based on this technology exhibit duality in conduction, i.e. they can be configured dynamically either as a p-type or an n-type device on the application of an external bias. Owing to this dynamic reconfiguration, these transistors are also referred to as Reconfigurable Field-Effect Transistors (RFETs). Exploring and developing new technologies just like CMOS, require tackling two main challenges – first, design automation flow has to be modified to enable tailor- made circuit designs. Second, possible application opportunities should be explored where such technologies can outsmart the existing CMOS technologies. This thesis targets the above two objectives for emerging reconfigurable nanotechnologies by proposing approaches for enabling an Electronic Design Automation (EDA) flow for circuits based on RFETs and exploring hardware security as an application that exploits the transistor-level dynamic reconfiguration offered by this technology. This thesis explains the bottom-up approach adopted to propose a logic synthesis flow by identifying new logic gates and circuit design paradigms that can particularly exploit the dynamic reconfiguration offered by these novel nanotechnologies. This led to the subsequent need of finding natural Boolean logic abstraction for emerging reconfigurable nanotechnologies as it is shown that the existing abstraction of negative unate logic for CMOS technologies is sub-optimal for RFETs-based circuits. In this direction, it has been shown that duality in Boolean logic is a natural abstraction for this technology and can truly represent the duality in conduction offered by individual transistors. Finding this abstraction paved the way for defining suitable primitives and proposing various algorithms for logic synthesis and technology mapping. The following step is to explore compatible physical synthesis flow for emerging reconfigurable nanotechnologies. Using silicon nanowire-based RFETs, .lef and .lib files have been provided which can provide an end-to-end flow to generate .GDSII file for circuits exclusively based on RFETs. Additionally, new approaches have been explored to improve placement and routing for circuits based on reconfigurable nanotechnologies. It has been demonstrated how these approaches led to superior results as compared to the native flow meant for CMOS. Lastly, the unique property of transistor-level reconfiguration offered by RFETs is utilized to implement efficient Intellectual Property (IP) protection schemes against adversarial attacks. The ability to control the conduction of individual transistors can be argued as one of the impactful features of this technology and suitably fits into the paradigm of security measures. Prior security schemes based on CMOS technology often come with large overheads in terms of area, power, and delay. In contrast, RFETs-based hardware security measures such as logic locking, split manufacturing, etc. proposed in this thesis, demonstrate affordable security solutions with low overheads. Overall, this thesis lays a strong foundation for the two main objectives – design automation, and hardware security as an application, to push emerging reconfigurable nanotechnologies for commercial integration. Additionally, contributions done in this thesis are made available under open-source licenses so as to foster new research directions and collaborations.:Abstract List of Figures List of Tables 1 Introduction 1.1 What are emerging reconfigurable nanotechnologies? 1.2 Why does this technology look so promising? 1.3 Electronics Design Automation 1.4 The game of see-saw: key challenges vs benefits for emerging reconfigurable nanotechnologies 1.4.1 Abstracting ambipolarity in logic gate designs 1.4.2 Enabling electronic design automation for RFETs 1.4.3 Enhanced functionality: a suitable fit for hardware security applications 1.5 Research questions 1.6 Entire RFET-centric EDA Flow 1.7 Key Contributions and Thesis Organization 2 Preliminaries 2.1 Reconfigurable Nanotechnology 2.1.1 1D devices 2.1.2 2D devices 2.1.3 Factors favoring circuit-flexibility 2.2 Feasibility aspects of RFET technology 2.3 Logic Synthesis Preliminaries 2.3.1 Circuit Model 2.3.2 Boolean Algebra 2.3.3 Monotone Function and the property of Unateness 2.3.4 Logic Representations 3 Exploring Circuit Design Topologies for RFETs 3.1 Contributions 3.2 Organization 3.3 Related Works 3.4 Exploring design topologies for combinational circuits: functionality-enhanced logic gates 3.4.1 List of Combinational Functionality-Enhanced Logic Gates based on RFETs 3.4.2 Estimation of gate delay using the logical effort theory 3.5 Invariable design of Inverters 3.6 Sequential Circuits 3.6.1 Dual edge-triggered TSPC-based D-flip flop 3.6.2 Exploiting RFET’s ambipolarity for metastability 3.7 Evaluations 3.7.1 Evaluation of combinational logic gates 3.7.2 Novel design of 1-bit ALU 3.7.3 Comparison of the sequential circuit with an equivalent CMOS-based design 3.8 Concluding remarks 4 Standard Cells and Technology Mapping 4.1 Contributions 4.2 Organization 4.3 Related Work 4.4 Standard cells based on RFETs 4.4.1 Interchangeable Pull-Up and Pull-Down Networks 4.4.2 Reconfigurable Truth-Table 4.5 Distilling standard cells 4.6 HOF-based Technology Mapping Flow for RFETs-based circuits 4.6.1 Area adjustments through inverter sharings 4.6.2 Technology Mapping Flow 4.6.3 Realizing Parameters For The Generic Library 4.6.4 Defining RFETs-based Genlib for HOF-based mapping 4.7 Experiments 4.7.1 Experiment 1: Distilling standard-cells from a benchmark suite 4.7.2 Experiment 2A: HOF-based mapping . 4.7.3 Experiment 2B: Using the distilled standard-cells during mapping 4.8 Concluding Remarks 5 Logic Synthesis with XOR-Majority Graphs 5.1 Contributions 5.2 Organization 5.3 Motivation 5.4 Background and Preliminaries 5.4.1 Terminologies 5.4.2 Self-duality in NPN classes 5.4.3 Majority logic synthesis 5.4.4 Earlier work on XMG 5.4.5 Classification of Boolean functions 5.5 Preserving Self-Duality 5.5.1 During logic synthesis 5.5.2 During versatile technology mapping 5.6 Advanced Logic synthesis techniques 5.6.1 XMG resubstitution 5.6.2 Exact XMG rewriting 5.7 Logic representation-agnostic Mapping 5.7.1 Versatile Mapper 5.7.2 Support of supergates 5.8 Creating Self-dual Benchmarks 5.9 Experiments 5.9.1 XMG-based Flow 5.9.2 Experimental Setup 5.9.3 Synthetic self-dual benchmarks 5.9.4 Cryptographic benchmark suite 5.10 Concluding remarks and future research directions 6 Physical synthesis flow and liberty generation 6.1 Contributions 6.2 Organization 6.3 Background and Related Work 6.3.1 Related Works 6.3.2 Motivation 6.4 Silicon Nanowire Reconfigurable Transistors 6.5 Layouts for Logic Gates 6.5.1 Layouts for Static Functional Logic Gates 6.5.2 Layout for Reconfigurable Logic Gate 6.6 Table Model for Silicon Nanowire RFETs 6.7 Exploring Approaches for Physical Synthesis 6.7.1 Using the Standard Place & Route Flow 6.7.2 Open-source Flow 6.7.3 Concept of Driver Cells 6.7.4 Native Approach 6.7.5 Island-based Approach 6.7.6 Utilization Factor 6.7.7 Placement of the Island on the Chip 6.8 Experiments 6.8.1 Preliminary comparison with CMOS technology 6.8.2 Evaluating different physical synthesis approaches 6.9 Results and discussions 6.9.1 Parameters Which Affect The Area 6.9.2 Use of Germanium Nanowires Channels 6.10 Concluding Remarks 7 Polymporphic Primitives for Hardware Security 7.1 Contributions 7.2 Organization 7.3 The Shift To Explore Emerging Technologies For Security 7.4 Background 7.4.1 IP protection schemes 7.4.2 Preliminaries 7.5 Security Promises 7.5.1 RFETs for logic locking (transistor-level locking) 7.5.2 RFETs for split manufacturing 7.6 Security Vulnerabilities 7.6.1 Realization of short-circuit and open-circuit scenarios in an RFET-based inverter 7.6.2 Circuit evaluation on sub-circuits 7.6.3 Reliability concerns: A consequence of short-circuit scenario 7.6.4 Implication of the proposed security vulnerability 7.7 Analytical Evaluation 7.7.1 Investigating the security promises 7.7.2 Investigating the security vulnerabilities 7.8 Concluding remarks and future research directions 8 Conclusion 8.1 Concluding Remarks 8.2 Directions for Future Work Appendices A Distilling standard-cells B RFETs-based Genlib C Layout Extraction File (.lef) for Silicon Nanowire-based RFET D Liberty (.lib) file for Silicon Nanowire-based RFET

Phase Locked Loop (PLL) based Clock and Data Recovery Circuits (CDR) using Calibrated Delay Flip Flop

A Delay Flip Flop (DFF) is used in the phase detector circuit of the clock and data recovery circuit. A DFF consists of the three important timing parameters: setup time, hold time, and clock-to-output delay. These timing parameters play a vital role in designing a system at the transistor level. This thesis paper explains the impact of metastablity on the clock and data recovery (CDR) system and the importance of calibrating the DFF using a metastable circuit to improve a system\u27s lock time and peak-to-peak jitter performance. The DFF was modeled in MATLAB Simulink software and calibrated by adjusting timing parameters. The CDR system was simulated in Simulink for three different cases: 1) equal setup and hold times, 2) setup time greater than the hold time, and 3) hold time greater than the setup time. The Simulink results were then compared with the Cadence simulation results, and it was observed that the calibration of DFF using a metastable circuit improved the CDR system\u27s lock time and jitter tolerance performance. The overall power dissipation of the designed CDR system was 2.4 mW from a 1 volt supply voltage

A high-frequency quad-modulus prescaler for fractional-N frequency synthesizer

Master'sMASTER OF ENGINEERIN

Architectural & circuit level techniques to improve energy efficiency of high speed serial links

High performance computing and communication are two key aspects of all information processing systems. With aggressive scaling of silicon technology enabling integration of a large number of transistors in a small area, managing power and thermal reliability has become very challenging. While lowering the power needed for performing computation has been the prime focus for decades, energy consumed for data transfer has recently become a major bottleneck especially in high performance applications. The focus of this thesis is on improving energy efficiency of communication links by exploring design techniques at both the architectural and circuit levels. In the first part of this work, we propose a time-based equalization scheme to implement transmit de-emphasis in voltage-mode output drivers. Using two-level pulse-width modulation, it overcomes the tradeoff between impedance matching, output swing, and de-emphasis resolution in conventional voltage-mode drivers. A prototype PWM-based 5$\,$Gb/s voltage-mode transmitter was implemented in a 90$\,$nm CMOS process and characterized across different channels and output swings to demonstrate the effectiveness of proposed techniques. The horizontal/vertical eye openings (BER=$\rm 10^{-12}$) at the ends of 60$\,$inch and 96$\,$inch stripline channels are 78$\,$mV/0.6$\,$UI and 8$\,$mV/0.3$\,$UI, respectively. This transmitter achieves an energy efficiency of 3.1$\,$mW/Gb/s while compensating for 16-28$\,$dB channel loss, which compares favorably with the state-of-the-art. In the second part, techniques to improve energy efficiency of a complete transceiver are presented. The transmitter employs a novel partially segmented voltage-mode output driver to lower power consumption in pre-drivers during 2-tap FIR equalization. The receiver implements a low power half-rate clock and data recovery with the proposed ring PLL based multi-phase sampling clock generation in CDR loop and charge-based sampling and deserialization. These techniques are verified using the measured results obtained from a 14Gb/s transceiver prototype. Transmitter achieves an energy efficiency of 0.89$\,$mW/Gb/s while securing a 0.36$\,$UI sampling time margin with $\rm{BER=10^{-12}}$ at the end of the channel with 11$\,$dB loss at Nyquist frequency. The receiver recovers sampling clock with 1.8$\,$$\rm{ps_{rms}}$ long term absolute jitter while recovering 14$\,$Gb/s data at $\rm{BER=10^{-12}}$. The receiver achieves an energy efficiency of 1.69$\,$mW/Gb/s. Transmitter and receiver share an LC PLL, which achieves 0.605$\,$$\rm{ps_{rms}}$ integrated jitter at 7$\,$GHz output with an energy efficiency of 0.5$\,$mW/GHz. The transceiver as a whole achieves an energy efficiency of 2.8$\,$mW/Gb/s

Design of clock and data recovery circuits for energy-efficient short-reach optical transceivers

Nowadays, the increasing demand for cloud based computing and social media services mandates higher throughput (at least 56 Gb/s per data lane with 400 Gb/s total capacity 1) for short reach optical links (with the reach typically less than 2 km) inside data centres. The immediate consequences are the huge and power hungry data centers. To address these issues the intra-data-center connectivity by means of optical links needs continuous upgrading. In recent years, the trend in the industry has shifted toward the use of more complex modulation formats like PAM4 due to its spectral efficiency over the traditional NRZ. Another advantage is the reduced number of channels count which is more cost-effective considering the required area and the I/O density. However employing PAM4 results in more complex transceivers circuitry due to the presence of multilevel transitions and reduced noise budget. In addition, providing higher speed while accommodating the stringent requirements of higher density and energy efficiency (< 5 pJ/bit), makes the design of the optical links more challenging and requires innovative design techniques both at the system and circuit level. This work presents the design of a Clock and Data Recovery Circuit (CDR) as one of the key building blocks for the transceiver modules used in such fibreoptic links. Capable of working with PAM4 signalling format, the new proposed CDR architecture targets data rates of 50−56 Gb/s while achieving the required energy efficiency (< 5 pJ/bit). At the system level, the design proposes a new PAM4 PD which provides a better trade-off in terms of bandwidth and systematic jitter generation in the CDR. By using a digital loop controller (DLC), the CDR gains considerable area reduction with flexibility to adjust the loop dynamics. At the circuit level it focuses on applying different circuit techniques to mitigate the circuit imperfections. It presents a wideband analog front end (AFE), suitable for a 56 Gb/s, 28-Gbaud PAM-4 signal, by using an 8x interleaved, master/ slave based sample and hold circuit. In addition, the AFE is equipped with a calibration scheme which corrects the errors associated with the sampling channels’ offset voltage and gain mismatches. The presented digital to phase converter (DPC) features a modified phase interpolator (PI), a new quadrature phase corrector (QPC) and multi-phase output with de-skewing capabilities.The DPC (as a standalone block) and the CDR (as the main focus of this work) were fabricated in 65-nm CMOS technology. Based on the measurements, the DPC achieves DNL/INL of 0.7/6 LSB respectively while consuming 40.5 mW power from 1.05 V supply. Although the CDR was not fully operational with the PAM4 input, the results from 25-Gbaud PAM2 (NRZ) test setup were used to estimate the performance. Under this scenario, the 1-UI JTOL bandwidth was measured to be 2 MHz with BER threshold of 10−4. The chip consumes 236 mW of power while operating on 1 − 1.2 V supply range achieving an energyefficiency of 4.27 pJ/bit