Wishbone bus Architecture - A Survey and Comparison

The performance of an on-chip interconnection architecture used for communication between IP cores depends on the efficiency of its bus architecture. Any bus architecture having advantages of faster bus clock speed, extra data transfer cycle, improved bus width and throughput is highly desirable for a low cost, reduced time-to-market and efficient System-on-Chip (SoC). This paper presents a survey of WISHBONE bus architecture and its comparison with three other on-chip bus architectures viz. Advanced Micro controller Bus Architecture (AMBA) by ARM, CoreConnect by IBM and Avalon by Altera. The WISHBONE Bus Architecture by Silicore Corporation appears to be gaining an upper edge over the other three bus architecture types because of its special performance parameters like the use of flexible arbitration scheme and additional data transfer cycle (Read-Modify-Write cycle). Moreover, its IP Cores are available free for use requiring neither any registration nor any agreement or license.Comment: 18 page

Real-time human action recognition on an embedded, reconfigurable video processing architecture

Copyright @ 2008 Springer-Verlag.In recent years, automatic human motion recognition has been widely researched within the computer vision and image processing communities. Here we propose a real-time embedded vision solution for human motion recognition implemented on a ubiquitous device. There are three main contributions in this paper. Firstly, we have developed a fast human motion recognition system with simple motion features and a linear Support Vector Machine (SVM) classifier. The method has been tested on a large, public human action dataset and achieved competitive performance for the temporal template (eg. “motion history image”) class of approaches. Secondly, we have developed a reconfigurable, FPGA based video processing architecture. One advantage of this architecture is that the system processing performance can be reconfiured for a particular application, with the addition of new or replicated processing cores. Finally, we have successfully implemented a human motion recognition system on this reconfigurable architecture. With a small number of human actions (hand gestures), this stand-alone system is performing reliably, with an 80% average recognition rate using limited training data. This type of system has applications in security systems, man-machine communications and intelligent environments.DTI and Broadcom Ltd

FPGA implementation of real-time human motion recognition on a reconfigurable video processing architecture

In recent years, automatic human motion recognition has been widely researched within the computer vision and image processing communities. Here we propose a real-time embedded vision solution for human motion recognition implemented on a ubiquitous device. There are three main contributions in this paper. Firstly, we have developed a fast human motion recognition system with simple motion features and a linear Support Vector Machine(SVM) classifier. The method has been tested on a large, public human action dataset and achieved competitive performance for the temporal template (eg. ``motion history image") class of approaches. Secondly, we have developed a reconfigurable, FPGA based video processing architecture. One advantage of this architecture is that the system processing performance can be reconfigured for a particular application, with the addition of new or replicated processing cores. Finally, we have successfully implemented a human motion recognition system on this reconfigurable architecture. With a small number of human actions (hand gestures), this stand-alone system is performing reliably, with an 80% average recognition rate using limited training data. This type of system has applications in security systems, man-machine communications and intelligent environments

On-chip interconnect schemes for reconfigurable system-on-chip

On-chip communication architectures can have a great influence on the speed and area of System-on-Chip designs, and this influence is expected to be even more pronounced on reconfigurable System-on-Chip (rSoC) designs. To date, little research has been conducted on the performance implications of different on-chip communication architectures for rSoC designs. This paper motivates the need for such research and analyses current and proposed interconnect technologies for rSoC design. The paper also describes work in progress on implementation of a simple serial bus and a packet-switched network, as well as a methodology for quantitatively evaluating the performance of these interconnection structures in comparison to conventional buses

Evaluation of AXI-Interfaces for Hardware Software Communication

A SoC design approach is implemented for the MERGE project which features Machine Learning (ML) interface for the hardware design. This setup deals with detection and localization of impact on a piezo metal composite. Development of the project is executed on Digilent ZYBO board. ZYBO incorporates Xilinx ZYNQ architecture. This architecture provides Processing System (PS) and Programmable Logic (PL) that communicate with each other via AMBA Standard AXI4 Interface. Communication cost have major inuence on the system performance. A optimized hardware software partitioning solution will reduce the communication costs. Therefore, best fitting interface for the provided design is needed to be evaluated to trade-off between cost and performance. High performance of AXI Interface will provide efficient localization of impact, especially for real-time scenario. In the thesis, the performance of three different AXI4 interface are evaluated. Evaluation is performed on the basis of the amount of data transferred and the time taken to process it. Evaluation of interfaces are done through implementation of test cases in Xilinx SDK. Hardware design for AXI4-Interfaces is implemented in Vivado and later tested on Digilent ZYBO board. To test the performance of interfaces, read and write operations are initiated by PS on interface design. Each operation is performed for multiple data lengths. Average execution time is calculated that highlights time taken to transfer the corresponding input data length. Through these tests, it is found that AXI4-Stream is the best choice for a continuous set of data. Preferably, it provides unlimited burst length which is useful for the current project. Among other two interfaces, AXI4-Full performed better in terms of execution time as compared to AXI4-Lite

The development of a node for a hardware reconfigurable parallel processor

This dissertation concerns the design and implementation of a node for a hardware reconfigurable parallel processor. The hardware that was developed allows for the further development of a parallel processor with configurable hardware acceleration. Each node in the system has a standard microprocessor and reconfigurable logic device and has high speed communications channels for inter-node communication. The design of the node provided high-speed serial communications channels allowing the implementation of various network topographies. The node also provided a PCI master interface to provide an external interface and communicate with local nodes on the bus. A high speed RlSC processor provided communication and system control functions and the reconfigurable logic device provided communication interfaces and data processing functions. The node was designed and implemented as a PCI card that interfaced a standard PCI bus. VHDL designs for logic devices that provided system support were developed, VHDL designs for the reconfigurable logic FPGA and software including drivers and system software were written for the node. The 64-bit version Linux operating system was then ported to the processor providing a UNIX environment for the system. The node functioned as specified and parallel and hardware accelerated processing was demonstrated. The hardware acceleration was shown to provide substantial performance benefits for the system

Integration and design for the ALICE ITS readout chain

ALICE and its Inner Tracking System detector in the LHC at CERN will undergo a major upgrade during its second long shutdown taking place in 2019 and 2020. New silicon sensors called ALPIDE will be utilized, which requires a new readout electronics system due to different interfaces and higher demands regarding band- width and latency. The readout chain consists of staves containing the sensors, a layer of readout unit boards gathering data from and controlling the sensor staves, and a layer of common readout units multiplexing and compressing data from the readout units before forwarding it to the O² data center system. As part of the ALICE collaboration, The University of Bergen is in charge of the development of several components in this readout chain. All development sites for the readout electronics should have the readout chain in place so that design and integration tasks can be done locally. As part of the work in this thesis, the ITS readout chain is integrated and tested. The working readout chain is then used to develop various control communication interfaces along the chain, such as an I²C interface for an auxiliary FPGA on the readout unit, and a high-speed interface for uploading data to the flash memory on the readout unit.Masteroppgave i fysikkMAMN-PHYSPHYS39

Implementation and Performance Analysis of Wishbone Shared Bus for Single Master-Multiple Slaves

System on Chip interconnections are gaining importance as many IP cores are being integrated on a single chip and interconnect is the bottleneck for design speed. In this paper an asynchronous design comprised of single master and multiple slaves connected via point-to-point topology is analysed. This design resulted in large multiplexer, poor timing closure and consumed large interconnect area in FPGA. The aim of the thesis is to evaluate the system on-chip interconnections and implement the system with the synchronous shared bus interconnection. Many system-on-chip interconnections are reviewed in the thesis, which includes study of major types of buses from different vendors. Synchronous shared bus system is proposed as solution for the interconnections between single master and multiple slaves. Shared bus for the single master and multiple slaves is implemented using WISHBONE architecture and protocols for shared bus system. A general model is designed and implemented which is flexible to be tested for single master and any number of slaves. Performance evaluation is done for the design in terms of resource utilization and timings performance