A review of gallium nitride LEDs for multi-gigabit-per-second visible light data communications

The field of visible light communications (VLC) has gained significant interest over the last decade, in both fibre and free-space embodiments. In fibre systems, the availability of low cost plastic optical fibre (POF) that is compatible with visible data communications has been a key enabler. In free-space applications, the availability of hundreds of THz of the unregulated spectrum makes VLC attractive for wireless communications. This paper provides an overview of the recent developments in VLC systems based on gallium nitride (GaN) light-emitting diodes (LEDs), covering aspects from sources to systems. The state-of-the-art technology enabling bandwidth of GaN LEDs in the range of >400 MHz is explored. Furthermore, advances in key technologies, including advanced modulation, equalisation, and multiplexing that have enabled free-space VLC data rates beyond 10 Gb/s are also outlined

Visible Light Communication (VLC)

Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC

Introduction to indoor networking concepts and challenges in LiFi

LiFi is networked, bidirectional wireless communication with light. It is used to connect fixed and mobile devices at very high data rates by harnessing the visible light and infrared spectrum. Combined, these spectral resources are 2600 times larger than the entire radio frequency (RF) spectrum. This paper provides the motivation behind why LiFi is a very timely technology, especially for 6th generation (6G) cellular communications. It discusses and reviews essential networking technologies, such as interference mitigation and hybrid LiFi/Wi-Fi networking topologies. We also consider the seamless integration of LiFi into existing wireless networks to form heterogeneous networks across the optical and RF domains and discuss implications and solutions in terms of load balancing. Finally, we provide the results of a real-world hybrid LiFi/Wi-Fi network deployment in a software defined networking testbed. In addition, results from a LiFi deployment in a school classroom are provided, which show that Wi-Fi network performance can be improved significantly by offloading traffic to the LiFi

Parallel Data Transmission in Indoor Visible Light Communication Systems

This paper presents an indoor visible light communication (VLC) system in conjunction with an imaging receiver with parallel data transmission (spatial multiplexing) to reduce the effects of the inter-symbol interference (ISI). To distinguish between light units (transmitters) and to match the light units used to convey the data with the pixels of the imaging receiver, we propose the use of subcarrier multiplexing (SCM) tones. Each light unit transmission is multiplexed with a unique tone. At the receiver, a SCM tone decision system is utilized to measure the power level of each SCM tone and consequently associate each pixel with a light unit. In addition, the level of co-channel interference (CCI) between light units is estimated using the SCM tones. Our proposed system is examined in two indoor environments taking into account reflective components (first and second order reflections). The results show that this system has the potential to achieve an aggregate data rate of 8 Gb/s with a bit error rate of 10 –6 for each light unit, using simple on-off-keying (OOK)

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

High Speed Optical Wireless Communication Systems.

Visible light communication (VLC) systems have become promising candidates to complement conventional radio frequency (RF) systems due to the increasingly saturated RF spectrum and the potentially high data rates that can be achieved by VLC systems. Over the last decade, significant research efforts have been directed towards the development of VLC systems due to their numerous advantages over RF communication systems, such as the availability of simple transmitters (light emitting diodes, (LEDs)) and receivers (silicon photo detectors), better security at the physical layer, improved energy efficiency due to the dual functionally (i.e., illumination and communication) and hundreds of THz of license-free bandwidth. However, several challenges face VLC systems to achieve high data rates (multi gigabits per second). These challenges include the low modulation bandwidth of the LEDs, inter symbol interference (ISI) due to multipath propagation, co-channel interference (CCI) and the light unit (i.e., VLC transmitter) should be ‘‘ON’’ all the time to ensure continuous communication. This thesis investigates a number of techniques to design robust highspeed indoor VLC systems that support a single user and multi-users. Light engines composed of RYGB laser diodes (LDs) are used for communication and illumination. The main goal of using LDs is to enable the VLC system to achieve high data rates while using simple modulation techniques (such as on off keying (OOK)), which adds simplicity to VLC systems. Three VLC systems based on the computer generated holograms (CGHs) are proposed in this thesis, which are single beam static CGH-VLC system, static CGH-VLC system and adaptive CGH-VLC system. Whereas in the first and the second systems a single photodetector is used (added simplicity), an imaging receiver is used in the third one to obtain spatial multiplexing. We consider the lighting constraints where illumination should be at an acceptable level and should consider diffuse reflections (up to second order) to find the maximum data rate that can be offered by each system. In the first system, the CGH is used to produce one fixed broad beam from the best light unit and focus it to a specific area on the communication floor. In the second system, the CGH generates 100 beams (all these beams carry same data) from the best transmitter and directs these beams to an area of 2 m × 2 m on the communication floor. In the third system, the CGH is used to generate eight beams from the best transmitter and steer these beams to the receiver’s location. In addition, each one of these eight beams carries a different data stream. This thesis also presents an indoor VLC system in conjunction with an imaging receiver with parallel data transmission (spatial multiplexing) to reduce the effects of inter-symbol-interference (ISI). To distinguish between light units (transmitters) and to match the light units used (to convey the data) with the pixels of the imaging receiver, we proposed the use of subcarrier multiplexing (SCM) tones. Each light unit transmission is multiplexed with a unique tone. At the receiver, a SCM tone decision system is utilised to measure the power level of each SCM tone and consequently associate each pixel with a light unit. We proposed a high data rate single user VLC system based on wavelength division multiplexing (WDM) in this thesis. An imaging diversity receiver (IMDR) is used as an optical receiver. Based on the location of the IMDR, each colour of the RYGB LDs sends a different data stream at a different rate where the variable data rates are attributed mainly to the different power levels assigned to the colours to yield the desired white colour. Each pixel of the IMDR is covered by a specific colour optical filter. WDM in conjunction with the SCM tones are used to realise a high data rate multi-user VLC system in this thesis. The SCM tones are used to allocate an optimum transmitter to each user and to calculate the co-channel interference (CCI). Two novel optical receivers are used to evaluate the performance of the VLC systems: an array of non-imaging receivers (NI-R) and an array of non-imaging angle diversity receivers (NI-ADR). This thesis proposes a multi-branch transmitter (MBT) as a solution that can improve the VLC system performance over an indoor channel and support multi-user operation. The MBT has many transmitter branches (TBs) where each branch is directed to a specific area. By reducing the semi angle of each TB, the effect of multipath propagations is reduced and the received optical power is improved. The performance of the MBT is evaluated with a single user VLC system using a wide field of view (W-FOV) receiver and then with an angle diversity receiver (ADR). The results show that this system can provide a data rate of 4 Gb/s and 10 Gb/s when using wide FOV receiver and ADR, respectively. In addition, the performance of the MBT is evaluated in a multi-user scenario. We used the MBT with WDM and SCM tones to realise a high data rate multiuser indoor VLC system. Four colour laser diodes (RYGB LDs) are used as sources of illumination and data communication. One colour of these four colours is used to convey the SCM tones at the beginning of the connection to set up the connection. When the connection is set up, the data is transmitted in parallel through the RYGB LDs