Design and evaluation of coexistence mechanisms for Bluetooth and IEEE 802.11b systems

Short-range wireless technologies are becoming increasingly important in enabling useful mobile applications. Bluetooth and IEEE 802.11b standards are the most commonly deployed technologies for WPAN and WLAN. However, because both standards share the same unlicensed ISM (Industrial, Scientific, Medical) radio spectrum, severe interference is inevitable and performance can be impaired significantly when heterogeneous devices using the two technologies come into close proximity. The most notable solution to this problem is a frequency domain noncollaborative coexistence mechanism called adaptive frequency hopping (AFH). However, we find that the efficiency of the 'channel classification' sub-process in noncollaborative mechanisms is by and large ignored in the literature. Moreover, we also find that there is no system resources awareness and no interference source genre concerns in IEEE 802.15 Task Group 2 AFH (TG2 AFH) design. Thus, we suggest a new approach called ISOAFH (Interference Source Oriented AFH). With the above considerations, we propose a customized channel classification process, thereby simplifying the time and space complexity of the mechanism. Through our detailed implementation of various coexistence mechanisms in MATLAB Simulink, it is observed that TG2 AFH performance is sensitive to memory and power limitations, while ISOAFH is much less sensitive to these constraints and can keep a much lower channel collision rate. On the other hand, We also study some open issues of a time domain mechanism called MDMS (Master Delay MAC Scheduling). We compare different coexistence mechanisms and find that the performance of each approach very much depends on the efficiency of its sub-processes.published_or_final_versio

Survey of Spectrum Sharing for Inter-Technology Coexistence

Increasing capacity demands in emerging wireless technologies are expected to be met by network densification and spectrum bands open to multiple technologies. These will, in turn, increase the level of interference and also result in more complex inter-technology interactions, which will need to be managed through spectrum sharing mechanisms. Consequently, novel spectrum sharing mechanisms should be designed to allow spectrum access for multiple technologies, while efficiently utilizing the spectrum resources overall. Importantly, it is not trivial to design such efficient mechanisms, not only due to technical aspects, but also due to regulatory and business model constraints. In this survey we address spectrum sharing mechanisms for wireless inter-technology coexistence by means of a technology circle that incorporates in a unified, system-level view the technical and non-technical aspects. We thus systematically explore the spectrum sharing design space consisting of parameters at different layers. Using this framework, we present a literature review on inter-technology coexistence with a focus on wireless technologies with equal spectrum access rights, i.e. (i) primary/primary, (ii) secondary/secondary, and (iii) technologies operating in a spectrum commons. Moreover, we reflect on our literature review to identify possible spectrum sharing design solutions and performance evaluation approaches useful for future coexistence cases. Finally, we discuss spectrum sharing design challenges and suggest future research directions

On adaptive frequency hopping to combat coexistence interference between bluetooth and IEEE 802.11b with practical resource constraints

In contrast to traditional frequency hopping techniques, Adaptive Frequency Hopping (AFH) is a low cost and low power solution to avoid interference dynamically. While each AFH algorithm proposed previously is shown to be efficient, a detailed performance analysis of various AFH mechanisms under realistic resource constraints is yet to be done. In particular, based on our performance study on Bluetooth systems presented in this paper, we have found that the AFH mechanism adopted by IEEE 802.15 Task Group 2 (TG2) is very sensitive to memory and power limitations. We then propose a novel Interference Source Oriented Adaptive Frequency Hopping (ISOAFH) approach based on a cross-layer design, in which the baseband layer of Bluetooth considers not only the instantaneous channels condition but also the physical layer transmission characteristics of potential interference sources in determining the hop sequence. In our simulations using detailed MATLAB Simulink modeling, we find that our proposed method is much more robust in that it is insensitive to memory and energy constraints. Indeed, our approach generally achieves a lower collision rate and higher ISM spectrum utilization.published_or_final_versio

Interference of 802.11B WLAN and Bluetooth: Analysis and Performance Evaluation

IEEE 802.11 and Bluetooth, these two operating in the unlicensed 2.4 GHz frequency band are becoming more and more popular in the mobile computing world. The number of devices equipped with IEEE 802.11 and Bluetooth is growing drastically. Result is the number of co-located devices, say within 10 meters, grown to a limit, so that it may causes interference issues in the 2.4 GHz radio frequency spectrum. Bluetooth supports both voice synchronous connection oriented (SCO) data and asynchronous connection less (ACL) packets. In this paper, we investigate the interference issues of 2.4 GHz frequency band. In addition, this paper presents a new Bluetooth voice packet Synchronous Connection Oriented with Repeated Transmission (SCORT) scheme to optimize the performance of 2.4 GHz frequency band by minimizing the interference between Bluetooth and 802.11 wireless networks. For the sake of experimental verifications, we provide a comprehensive simulation results using Matlab Simulink

Frequency hopping in wireless sensor networks

Wireless sensor networks (WSNs) are nowadays being used to collectively gather and spread information in different kinds of applications, for military, civilian, environmental as well as commercial purposes. Therefore the proper functioning of WSNs under different kinds of environmental conditions, especially hostile environments, is a must and a lot of research currently ongoing. The problems related to the initialization and deployment of WSNs under harsh and resource limited conditions are investigated in this thesis. Frequency hopping (FH) is a spread spectrum technique in which multiple channels are used, or hoped, for communications across the network. This mitigates the worst effects of interference with frequency agile communication systems rather than by brute force approaches. FH is a promising technique for achieving the coexistence of sensor networks with other currently existing wireless systems, and it is successful within the somewhat limited computational capabilities of the sensor nodes hardware radios. In this thesis, a FH scheme for WSNs is implemented for a pair of nodes on an application layer. The merits and demerits of the scheme are studied for different kinds of WSN environments. The implementation has been done using a Sensinode NanoStack, a communication stack for internet protocol (IP) based wireless sensor networks and a Sensinode Devkit, for an IPv6 over low power wireless personal area network (6LoWPAN). The measurements are taken from the developed test bed and channel simulator for different kinds of scenarios. The detailed analysis of the FH scheme is done to determine its usefulness against interference from other wireless systems, especially wireless local area networks (WLANs), and the robustness of the scheme to combat fading or frequency selective fading

Interference mitigation strategy design and applications for wireless sensor networks

The Institute of Electrical and Electronics Engineers (IEEE) 802.15.4 standard presents a very useful technology for implementing low-cost, low-power, wireless sensor networks. Its main focus, which is to applications requiring simple wireless connectivity with relaxed throughout and latency requirements, makes it suitable for connecting devices that have not been networked, such as industrial and control instrumentation equipments, agricultural equipments, vehicular equipments, and home appliances. Its usage of the license-free 2.4 GHz frequency band makes the technique successful for fast and worldwide market deployments. However, concerns about interference have arisen due to the presence of other wireless technologies using the same spectrum. Although the IEEE 802.15.4 standard has provided some mechanisms, to enhance capability to coexist with other wireless devices operating on the same frequency band, including Carrier Sensor Multiple Access (CSMA), Clear Channel Assessment (CCA), channel alignment, and low duty cycle, it is essential to design and implement adjustable mechanisms for an IEEE 802.15.4 based system integrated into a practical application to deal with interference which changes randomly over time. Among the potential interfering systems (Wi-Fi, Bluetooth, cordless phones, microwave ovens, wireless headsets, etc) which work on the same Industrial, Scientific, and Medical (ISM) frequency band, Wi-Fi systems (IEEE 802.11 technique) have attracted most concerns because of their high transmission power and large deployment in both residential and office environments. This thesis aims to propose a methodology for IEEE 802.15.4 wireless systems to adopt proper adjustment in order to mitigate the effect of interference caused by IEEE 802.11 systems through energy detection, channel agility and data recovery. The contribution of this thesis consists of five parts. Firstly, a strategy is proposed to enable IEEE 802.15.4 systems to maintain normal communications using the means of consecutive transmissions, when the system s default mechanism of retransmission is insufficient to ensure successful rate due to the occurrence of Wi-Fi interference. Secondly, a novel strategy is proposed to use a feasible way for IEEE 802.15.4 systems to estimate the interference pattern, and accordingly adjust system parameters for the purpose of achieving optimized communication effectiveness during time of interference without relying on hardware changes and IEEE 802.15.4 protocol modifications. Thirdly, a data recovery mechanism is proposed for transport control to be applied for recovering lost data by associating with the proposed strategies to ensure the data integrity when IEEE 802.15.4 systems are suffering from interference. Fourthly, a practical case is studied to discuss how to design a sustainable system for home automation application constructed on the basis of IEEE 802.15.4 technique. Finally, a comprehensive design is proposed to enable the implementation of an interference mitigation strategy for IEEE 802.15.4 based ad hoc WSNs within a structure of building fire safety monitoring system. The proposed strategies and system designs are demonstrated mainly through theoretical analysis and experimental tests. The results obtained from the experimental tests have verified that the interference caused by an IEEE 802.11 system on an IEEE 802.15.4 system can be effectively mitigated through adjusting IEEE 802.15.4 system s parameters cooperating with interference pattern estimation. The proposed methods are suitable to be integrated into a system-level solution for an IEEE 802.15.4 system to deal with interference, which is also applicable to those wireless systems facing similar interference issues to enable the development of efficient mitigation strategies

Implementing and Evaluating a Wireless Body Sensor System for Automated Physiological Data Acquisition at Home

Advances in embedded devices and wireless sensor networks have resulted in new and inexpensive health care solutions. This paper describes the implementation and the evaluation of a wireless body sensor system that monitors human physiological data at home. Specifically, a waist-mounted triaxial accelerometer unit is used to record human movements. Sampled data are transmitted using an IEEE 802.15.4 wireless transceiver to a data logger unit. The wearable sensor unit is light, small, and consumes low energy, which allows for inexpensive and unobtrusive monitoring during normal daily activities at home. The acceleration measurement tests show that it is possible to classify different human motion through the acceleration reading. The 802.15.4 wireless signal quality is also tested in typical home scenarios. Measurement results show that even with interference from nearby IEEE 802.11 signals and microwave ovens, the data delivery performance is satisfactory and can be improved by selecting an appropriate channel. Moreover, we found that the wireless signal can be attenuated by housing materials, home appliances, and even plants. Therefore, the deployment of wireless body sensor systems at home needs to take all these factors into consideration.Comment: 15 page