Via-configurable transistors array: a regular design technique to improve ICs yield

Process variations are a major bottleneck for digital CMOS integrated circuits manufacturability and yield. That is why regular techniques with different degrees of regularity are emerging as possible solutions. Our proposal is a new regular layout design technique called Via-Configurable Transistors Array (VCTA) that pushes to the limit circuit layout regularity for devices and interconnects in order to maximize regularity benefits. VCTA is predicted to perform worse than the Standard Cell approach designs for a certain technology node but it will allow the use of a future technology on an earlier time. Our objective is to optimize VCTA for it to be comparable to the Standard Cell design in an older technology. Simulations for the first unoptimized version of our VCTA of delay and energy consumption for a Full Adder circuit in the 90 nm technology node are presented and also the extrapolation for Carry-Ripple Adders from 4 bits to 64 bits.Peer ReviewedPostprint (published version

FOCSI: A new layout regularity metric

Technical ReportDigital CMOS Integrated Circuits (ICs) suffer from serious layout features printability issues associated to the lithography manufacturing process. Regular layout designs are emerging as alternative solutions to reduce these ICs systematic subwavelength lithography failures. However, there is no metric to evaluate and compare the layout regularity of those regular designs. In this paper we propose a new layout regularity metric called Fixed Origin Corner Square Inspection (FOCSI). FOCSI allows the comparison and quantification of designs in terms of regularity and for any given degree of granularity. When FOCSI is oriented to the evaluation of regularity while applying Lithography Enhancement Techniques, it comprehends layout layers measurements considering the optical interaction length and combines them to obtain the complete layout regularity measure. Examples are provided for 32-bit adders in the 90 nm technology node for the Standard Cell approach and for Via-Configurable Transistor Array regular designs. We show how layouts can be sorted accurately even if their degree of regularity is similar.Preprin

AMG: Automated Efficient Approximate Multiplier Generator for FPGAs via Bayesian Optimization

Approximate computing is a promising approach to reduce the power, delay, and area in hardware design for many error-resilient applications such as machine learning (ML) and digital signal processing (DSP) systems, in which multipliers usually are key arithmetic units. Due to the underlying architectural differences between ASICs and FPGAs, existing ASIC-based approximate multipliers do not offer symmetrical gains when they are implemented by FPGA resources. In this paper, we propose AMG, an open-source automated approximate multiplier generator for FPGAs driven by Bayesian optimization (BO) with parallel evaluation. The proposed method simplifies the exact half adders (HAs) for the initial partial product (PP) compression in a multiplier while preserving coarse-grained additions for the following accumulation. The generated multipliers can be effectively mapped to lookup tables (LUTs) and carry chains provided by modern FPGAs, reducing hardware costs with acceptable errors. Compared with 1167 multipliers from previous works, our generated multipliers can form a Pareto front with 28.70%-38.47% improvements in terms of the product of hardware cost and error on average. All source codes, reproduced multipliers, and our generated multipliers are available at https://github.com/phyzhenli/AMG.Comment: 7 pages, 2023 IEEE International Conference on Field-Programmable Technology (ICFPT

Regular Fabric Design with Ambipolar CNTFETs for FPGA and Structured ASIC Applications

In this paper, we propose for the first time the application of ambipolar CNTFETs with in-field controllable polarities to design regular fabrics with static logic. We exploit the high expressive power provided by complementary static logic built with ambipolar CNTFETs to design compact and efficient configurable gates. After evaluating a polarity-aware logic design for the configurable gates, we selected a number of gates with an And-Or-Inverter structure and produced a first comparison with existent medium-grained logic blocks, like the Actel ACT1 and 4-input LUTs [1]. Preliminary evaluation of our gates indicates improvements of around 47% over the ACT1 and of about 18× with respect to 4-input LUTs in terms of area×normalized delay

On Regularity and Integrated DFM Metrics

Transistor geometries are well into the nanometer regime, keeping with Moore's Law. With this scaling in geometry, problems not significant in the larger geometries have come to the fore. These problems, collectively termed variability, stem from second-order effects due to the small geometries themselves and engineering limitations in creating the small geometries. The engineering obstacles have a few solutions which are yet to be widely adopted due to cost limitations in deploying them. Addressing and mitigating variability due to second-order effects comes largely under the purview of device engineers and to a smaller extent, design practices. Passive layout measures that ease these manufacturing limitations by regularizing the different layout pitches have been explored in the past. However, the question of the best design practice to combat systematic variations is still open. In this work we explore considerations for the regular layout of the exclusive-OR gate, the half-adder and full-adder cells implemented with varying degrees of regularity. Tradeoffs like complete interconnect unidirectionality, and the inevitable introduction of vias are qualitatively analyzed and some factors affecting the analysis are presented. Finally, results from the Calibre Critical Feature Analysis (CFA) of the cells are used to evaluate the qualitative analysis

A Hybrid Partially Reconfigurable Overlay Supporting Just-In-Time Assembly of Custom Accelerators on FPGAs

The state of the art in design and development flows for FPGAs are not sufficiently mature to allow programmers to implement their applications through traditional software development flows. The stipulation of synthesis as well as the requirement of background knowledge on the FPGAs\u27 low-level physical hardware structure are major challenges that prevent programmers from using FPGAs. The reconfigurable computing community is seeking solutions to raise the level of design abstraction at which programmers must operate, and move the synthesis process out of the programmers\u27 path through the use of overlays. A recent approach, Just-In-Time Assembly (JITA), was proposed that enables hardware accelerators to be assembled at runtime, all from within a traditional software compilation flow. The JITA approach presents a promising path to constructing hardware designs on FPGAs using pre-synthesized parallel programming patterns, but suffers from two major limitations. First, all variant programming patterns must be pre-synthesized. Second, conditional operations are not supported. In this thesis, I present a new reconfigurable overlay, URUK, that overcomes the two limitations imposed by the JITA approach. Similar to the original JITA approach, the proposed URUK overlay allows hardware accelerators to be constructed on FPGAs through software compilation flows. To this basic capability, URUK adds additional support to enable the assembly of presynthesized fine-grained computational operators to be assembled within the FPGA. This thesis provides analysis of URUK from three different perspectives; utilization, performance, and productivity. The analysis includes comparisons against High-Level Synthesis (HLS) and the state of the art approach to creating static overlays. The tradeoffs conclude that URUK can achieve approximately equivalent performance for algebra operations compared to HLS custom accelerators, which are designed with simple experience on FPGAs. Further, URUK shows a high degree of flexibility for runtime placement and routing of the primitive operations. The analysis shows how this flexibility can be leveraged to reduce communication overhead among tiles, compared to traditional static overlays. The results also show URUK can enable software programmers without any hardware skills to create hardware accelerators at productivity levels consistent with software development and compilation

Polarity Control at Runtime:from Circuit Concept to Device Fabrication

Semiconductor device research for digital circuit design is currently facing increasing challenges to enhance miniaturization and performance. A huge economic push and the interest in novel applications are stimulating the development of new pathways to overcome physical limitations affecting conventional CMOS technology. Here, we propose a novel Schottky barrier device concept based on electrostatic polarity control. Specifically, this device can behave as p- or n-type by simply changing an electric input bias. This device combines More-than-Moore and Beyond CMOS elements to create an efficient technology with a viable path to Very Large Scale Integration (VLSI). This thesis proposes a device/circuit/architecture co-optimization methodology, where aspects of device technology to logic circuit and system design are considered. At device level, a full CMOS compatible fabrication process is presented. In particular, devices are demonstrated using vertically stacked, top-down fabricated silicon nanowires with gate-all-around electrode geometry. Source and drain contacts are implemented using nickel silicide to provide quasi-symmetric conduction of either electrons or holes, depending on the mode of operation. Electrical measurements confirm excellent performance, showing Ion/Ioff > 10^7 and subthreshold slopes approaching the thermal limit, SS ~ 60mV/dec (~ 63mV/dec) for n(p)-type operation in the same physical device. Moreover, the shown devices behave as p-type for a polarization bias (polarity gate voltage, Vpg) of 0V, and n-type for a Vpg = 1V, confirming their compatibility with multi-level static logic circuit design. At logic gate level, two- and four-transistor logic gates are fabricated and tested. In particular, the first fully functional, two-transistor XOR logic gate is demonstrated through electrical characterization, confirming that polarity control can enable more compact logic gate design with respect to conventional CMOS. Furthermore, we show for the first time fabricated four- transistors logic gates that can be reconfigured as NAND or XOR only depending on their external connectivity. In this case, logic gates with full swing output range are experimentally demonstrated. Finally, single device and mixed-mode TCAD simulation results show that lower Vth and more optimized polarization ranges can be expected in scaled devices implementing strain or high-k technologies. At circuit and system level, a full semi-custom logic circuit design tool flow was defined and configured. Using this flow, novel logic libraries based on standard cells or regular gate fabrics were compared with standard CMOS. In this respect, results were shown in comparison to CMOS, including a 40% normalized area-delay product reduction for the analyzed standard cell libraries, and improvements of over 2× in terms of normalized delay for regular Controlled Polarity (CP)-based cells in the context of Structured ASICs. These results, in turn, confirm the interest in further developing and optimizing CP devices, as promising candidates for future digital circuit technology

Memory and information processing in neuromorphic systems

A striking difference between brain-inspired neuromorphic processors and current von Neumann processors architectures is the way in which memory and processing is organized. As Information and Communication Technologies continue to address the need for increased computational power through the increase of cores within a digital processor, neuromorphic engineers and scientists can complement this need by building processor architectures where memory is distributed with the processing. In this paper we present a survey of brain-inspired processor architectures that support models of cortical networks and deep neural networks. These architectures range from serial clocked implementations of multi-neuron systems to massively parallel asynchronous ones and from purely digital systems to mixed analog/digital systems which implement more biological-like models of neurons and synapses together with a suite of adaptation and learning mechanisms analogous to the ones found in biological nervous systems. We describe the advantages of the different approaches being pursued and present the challenges that need to be addressed for building artificial neural processing systems that can display the richness of behaviors seen in biological systems.Comment: Submitted to Proceedings of IEEE, review of recently proposed neuromorphic computing platforms and system

On-chip interconnect schemes for reconfigurable system-on-chip

On-chip communication architectures can have a great influence on the speed and area of System-on-Chip designs, and this influence is expected to be even more pronounced on reconfigurable System-on-Chip (rSoC) designs. To date, little research has been conducted on the performance implications of different on-chip communication architectures for rSoC designs. This paper motivates the need for such research and analyses current and proposed interconnect technologies for rSoC design. The paper also describes work in progress on implementation of a simple serial bus and a packet-switched network, as well as a methodology for quantitatively evaluating the performance of these interconnection structures in comparison to conventional buses

Design Methodologies and Architecture Solutions for High-Performance Interconnects

ABSTRACT In Deep Sub-Micron (DSM) technologies, interconnects play a crucial role in the correct functionality and largely impact the performance of complex System-on-Chip (SoC) designs. For technologies of 0.25µm and below, wiring capacitance dominates gate capacitance, thus rapidly increasing the interconnect-induced delay. Moreover, the coupling capacitance becomes a significant portion of the on-chip total wiring capacitance, and coupling between adjacent wires cannot be considered as a second-order effect any longer. As a consequence, the traditional top-down design methodology is ineffective, since the actual wiring delays can be computed only after layout parasitic extraction, when the physical design is completed. Fixing all the timing violations often requires several time-consuming iterations of logical and physical design, and it is essentially a trial-and-error approach. Increasingly tighter time-to-market requirements dictate that interconnect parasitics must be taken into account during all phases of the design flow, at different level of abstractions. However, given the aggressive technology scaling trends and the growing design complexity, this approach will only temporarily ameliorate the interconnect problem. We believe that in order to achieve gigascale designs in the nanometer regime, a novel design paradigm, based on new forms of regularity and newly created IP (Intellectual Property) blocks must be developed, to provide a direct path from system-level architectural exploration to physical implementation