An Energy-Efficient Design Paradigm for a Memory Cell Based on Novel Nanoelectromechanical Switches

In this chapter, we explain NEMsCAM cell, a new content-addressable memory (CAM) cell, which is designed based on both CMOS technologies and nanoelectromechanical (NEM) switches. The memory part of NEMsCAM is designed with two complementary nonvolatile NEM switches and located on top of the CMOS-based comparison component. As a use case, we evaluate first-level instruction and data translation lookaside buffers (TLBs) with 16 nm CMOS technology at 2 GHz. The simulation results demonstrate that the NEMsCAM TLB reduces the energy consumption per search operation (by 27%), standby mode (by 53.9%), write operation (by 41.9%), and the area (by 40.5%) compared to a CMOS-only TLB with minimal performance overhead

Gestión de jerarquías de memoria híbridas a nivel de sistema

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadoras y Automática y de Ku Leuven, Arenberg Doctoral School, Faculty of Engineering Science, leída el 11/05/2017.In electronics and computer science, the term ‘memory’ generally refers to devices that are used to store information that we use in various appliances ranging from our PCs to all hand-held devices, smart appliances etc. Primary/main memory is used for storage systems that function at a high speed (i.e. RAM). The primary memory is often associated with addressable semiconductor memory, i.e. integrated circuits consisting of silicon-based transistors, used for example as primary memory but also other purposes in computers and other digital electronic devices. The secondary/auxiliary memory, in comparison provides program and data storage that is slower to access but offers larger capacity. Examples include external hard drives, portable flash drives, CDs, and DVDs. These devices and media must be either plugged in or inserted into a computer in order to be accessed by the system. Since secondary storage technology is not always connected to the computer, it is commonly used for backing up data. The term storage is often used to describe secondary memory. Secondary memory stores a large amount of data at lesser cost per byte than primary memory; this makes secondary storage about two orders of magnitude less expensive than primary storage. There are two main types of semiconductor memory: volatile and nonvolatile. Examples of non-volatile memory are ‘Flash’ memory (sometimes used as secondary, sometimes primary computer memory) and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs). Examples of volatile memory are primary memory (typically dynamic RAM, DRAM), and fast CPU cache memory (typically static RAM, SRAM, which is fast but energy-consuming and offer lower memory capacity per are a unit than DRAM). Non-volatile memory technologies in Si-based electronics date back to the 1990s. Flash memory is widely used in consumer electronic products such as cellphones and music players and NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. The rapid increase of leakage currents in Silicon CMOS transistors with scaling poses a big challenge for the integration of SRAM memories. There is also the case of susceptibility to read/write failure with low power schemes. As a result of this, over the past decade, there has been an extensive pooling of time, resources and effort towards developing emerging memory technologies like Resistive RAM (ReRAM/RRAM), STT-MRAM, Domain Wall Memory and Phase Change Memory(PRAM). Emerging non-volatile memory technologies promise new memories to store more data at less cost than the expensive-to build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. These new memory technologies combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the non-volatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. The research and information on these Non-Volatile Memory (NVM) technologies has matured over the last decade. These NVMs are now being explored thoroughly nowadays as viable replacements for conventional SRAM based memories even for the higher levels of the memory hierarchy. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional(3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years...En el campo de la informática, el término ‘memoria’ se refiere generalmente a dispositivos que son usados para almacenar información que posteriormente será usada en diversos dispositivos, desde computadoras personales (PC), móviles, dispositivos inteligentes, etc. La memoria principal del sistema se utiliza para almacenar los datos e instrucciones de los procesos que se encuentre en ejecución, por lo que se requiere que funcionen a alta velocidad (por ejemplo, DRAM). La memoria principal está implementada habitualmente mediante memorias semiconductoras direccionables, siendo DRAM y SRAM los principales exponentes. Por otro lado, la memoria auxiliar o secundaria proporciona almacenaje(para ficheros, por ejemplo); es más lenta pero ofrece una mayor capacidad. Ejemplos típicos de memoria secundaria son discos duros, memorias flash portables, CDs y DVDs. Debido a que estos dispositivos no necesitan estar conectados a la computadora de forma permanente, son muy utilizados para almacenar copias de seguridad. La memoria secundaria almacena una gran cantidad de datos aun coste menor por bit que la memoria principal, siendo habitualmente dos órdenes de magnitud más barata que la memoria primaria. Existen dos tipos de memorias de tipo semiconductor: volátiles y no volátiles. Ejemplos de memorias no volátiles son las memorias Flash (algunas veces usadas como memoria secundaria y otras veces como memoria principal) y memorias ROM/PROM/EPROM/EEPROM (usadas para firmware como programas de arranque). Ejemplos de memoria volátil son las memorias DRAM (RAM dinámica), actualmente la opción predominante a la hora de implementar la memoria principal, y las memorias SRAM (RAM estática) más rápida y costosa, utilizada para los diferentes niveles de cache. Las tecnologías de memorias no volátiles basadas en electrónica de silicio se remontan a la década de1990. Una variante de memoria de almacenaje por carga denominada como memoria Flash es mundialmente usada en productos electrónicos de consumo como telefonía móvil y reproductores de música mientras NAND Flash solid state disks(SSDs) están progresivamente desplazando a los dispositivos de disco duro como principal unidad de almacenamiento en computadoras portátiles, de escritorio e incluso en centros de datos. En la actualidad, hay varios factores que amenazan la actual predominancia de memorias semiconductoras basadas en cargas (capacitivas). Por un lado, se está alcanzando el límite de integración de las memorias Flash, lo que compromete su escalado en el medio plazo. Por otra parte, el fuerte incremento de las corrientes de fuga de los transistores de silicio CMOS actuales, supone un enorme desafío para la integración de memorias SRAM. Asimismo, estas memorias son cada vez más susceptibles a fallos de lectura/escritura en diseños de bajo consumo. Como resultado de estos problemas, que se agravan con cada nueva generación tecnológica, en los últimos años se han intensificado los esfuerzos para desarrollar nuevas tecnologías que reemplacen o al menos complementen a las actuales. Los transistores de efecto campo eléctrico ferroso (FeFET en sus siglas en inglés) se consideran una de las alternativas más prometedores para sustituir tanto a Flash (por su mayor densidad) como a DRAM (por su mayor velocidad), pero aún está en una fase muy inicial de su desarrollo. Hay otras tecnologías algo más maduras, en el ámbito de las memorias RAM resistivas, entre las que cabe destacar ReRAM (o RRAM), STT-RAM, Domain Wall Memory y Phase Change Memory (PRAM)...Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

Dynamic Laser Fault Injection Aided by Quiescent Photon Emissions in Embedded Microcontrollers: Apparatus, Methodology and Attacks

Internet of Things (IoT) is becoming more integrated in our daily life with the increasing number of embedded electronic devices interacting together. These electronic devices are often controlled by a Micro-Controller Unit (MCU). As an example, it is estimated that today’s well-equipped automobile uses more than 50 MCUs. Some MCUs contain cryptographic co-processors to enhance the security of the exchanged and stored data with a common belief that the data is secured and safe. However many MCUs have been shown to be vulnerable to Fault Injection (FI) attacks. These attacks can reveal shared secrets, firmware, and other confidential information. In addition, this extracted information obtained by attacks can lead to identification of new vulnerabilities which may scale to attacks on many devices. In general, FI on MCUs corrupt data or corrupt instructions. Although it is assumed that only authorized personnel with access to cryptographic secrets will gain access to confidential information in MCUs, attackers in specialized labs nowadays may have access to high-tech equipment which could be used to attack these MCUs. Laser Fault Injection (LFI) is gaining more of a reputation for its ability to inject local faults rather than global ones due to its precision, thus providing a greater risk of breaking security in many devices. Although publications have generally discussed the topic of security of MCUs, attack techniques are diverse and published LFI provides few and superficial details about the used experimental setup and methodology. Furthermore, limited research has examined the combination of both LFI and Photo-Emission Microscopy (PEM), direct modification of instructions using the LFI, control of embedded processor resets using LFI, and countermeasures which simultaneously thwart other aspects including decapsulation and reverse engineering (RE). This thesis contributes to the study of the MCUs’ security by analyzing their susceptibility to LFI attacks and PEM. The proposed research aims to build a LFI bench from scratch allowing maximum control of laser parameters. In addition, a methodology for analysis of the Device Under Attack (DUA) in preparation for LFI is proposed, including frontside/backside decapsulation methods, and visualization of the structure of the DUA. Analysis of attack viability of different targets on the DUA, including One-Time Programmable (OTP) memory, Flash memory and Static Random Access Memory (SRAM) was performed. A realistic attack of a cryptographic algorithm, such as Advanced Encryption Standard (AES) using LFI was conducted. On the other hand, countermeasures to the proposed attack techniques, including decapsulation/RE, LFI and PEM, were discussed. This dissertation provides a summary for the necessary background and experimental setup to study the possibility of LFI and PEM in different DUAs of two different technologies, specifically PIC16F687 and ARM Cortex-M0 LPC1114FN28102. Attacks performed on on-chip peripherals such as Universal Asynchronous Receiver/Transmitter (UART) and debug circuity reveal new vulnerabilities. This research is important for understanding attacks in order to design countermeasures for securing future hardware

SerIOS: Enhancing Hardware Security in Integrated Optoelectronic Systems

Silicon photonics (SiPh) has different applications, from enabling fast and high-bandwidth communication for high-performance computing systems to realizing energy-efficient optical computation for AI hardware accelerators. However, integrating SiPh with electronic sub-systems can introduce new security vulnerabilities that cannot be adequately addressed using existing hardware security solutions for electronic systems. This paper introduces SerIOS, the first framework aimed at enhancing hardware security in optoelectronic systems by leveraging the unique properties of optical lithography. SerIOS employs cryptographic keys generated based on imperfections in the optical lithography process and an online detection mechanism to detect attacks. Simulation and synthesis results demonstrate SerIOS's effectiveness in detecting and preventing attacks, with a small area footprint of less than 15% and a 100% detection rate across various attack scenarios and optoelectronic architectures, including photonic AI accelerators

Zuverlässige und Energieeffiziente gemischt-kritische Echtzeit On-Chip Systeme

Multi- and many-core embedded systems are increasingly becoming the target for many applications that require high performance under varying conditions. A resulting challenge is the control, and reliable operation of such complex multiprocessing architectures under changes, e.g., high temperature and degradation. In mixed-criticality systems where many applications with varying criticalities are consolidated on the same execution platform, fundamental isolation requirements to guarantee non-interference of critical functions are crucially important. While Networks-on-Chip (NoCs) are the prevalent solution to provide scalable and efficient interconnects for the multiprocessing architectures, their associated energy consumption has immensely increased. Specifically, hard real-time NoCs must manifest limited energy consumption as thermal runaway in such a core shared resource jeopardizes the whole system guarantees. Thus, dynamic energy management of NoCs, as opposed to the related work static solutions, is highly necessary to save energy and decrease temperature, while preserving essential temporal requirements. In this thesis, we introduce a centralized management to provide energy-aware NoCs for hard real-time systems. The design relies on an energy control network, developed on top of an existing switch arbitration network to allow isolation between energy optimization and data transmission. The energy control layer includes local units called Power-Aware NoC controllers that dynamically optimize NoC energy depending on the global state and applications’ temporal requirements. Furthermore, to adapt to abnormal situations that might occur in the system due to degradation, we extend the concept of NoC energy control to include the entire system scope. That is, online resource management employing hierarchical control layers to treat system degradation (imminent core failures) is supported. The mechanism applies system reconfiguration that involves workload migration. For mixed-criticality systems, it allows flexible boundaries between safety-critical and non-critical subsystems to safely apply the reconfiguration, preserving fundamental safety requirements and temporal predictability. Simulation and formal analysis-based experiments on various realistic usecases and benchmarks are conducted showing significant improvements in NoC energy-savings and in treatment of system degradation for mixed-criticality systems improving dependability over the status quo.Eingebettete Many- und Multi-core-Systeme werden zunehmend das Ziel für Anwendungen, die hohe Anfordungen unter unterschiedlichen Bedinungen haben. Für solche hochkomplexed Multi-Prozessor-Systeme ist es eine grosse Herausforderung zuverlässigen Betrieb sicherzustellen, insbesondere wenn sich die Umgebungseinflüsse verändern. In Systeme mit gemischter Kritikalität, in denen viele Anwendungen mit unterschiedlicher Kritikalität auf derselben Ausführungsplattform bedient werden müssen, sind grundlegende Isolationsanforderungen zur Gewährleistung der Nichteinmischung kritischer Funktionen von entscheidender Bedeutung. Während On-Chip Netzwerke (NoCs) häufig als skalierbare Verbindung für die Multiprozessor-Architekturen eingesetzt werden, ist der damit verbundene Energieverbrauch immens gestiegen. Daher sind dynamische Plattformverwaltungen, im Gegensatz zu den statischen, zwingend notwendig, um ein System an die oben genannten Veränderungen anzupassen und gleichzeitig Timing zu gewährleisten. In dieser Arbeit entwickeln wir energieeffiziente NoCs für harte Echtzeitsysteme. Das Design basiert auf einem Energiekontrollnetzwerk, das auf einem bestehenden Switch-Arbitration-Netzwerk entwickelt wurde, um eine Isolierung zwischen Energieoptimierung und Datenübertragung zu ermöglichen. Die Energiesteuerungsschicht umfasst lokale Einheiten, die als Power-Aware NoC-Controllers bezeichnet werden und die die NoC-Energie in Abhängigkeit vom globalen Zustand und den zeitlichen Anforderungen der Anwendungen optimieren. Darüber hinaus wird das Konzept der NoC-Energiekontrolle zur Anpassung an Anomalien, die aufgrund von Abnutzung auftreten können, auf den gesamten Systemumfang ausgedehnt. Online- Ressourcenverwaltungen, die hierarchische Kontrollschichten zur Behandlung Abnutzung (drohender Kernausfälle) einsetzen, werden bereitgestellt. Bei Systemen mit gemischter Kritikalität erlaubt es flexible Grenzen zwischen sicherheitskritischen und unkritischen Subsystemen, um die Rekonfiguration sicher anzuwenden, wobei grundlegende Sicherheitsanforderungen erhalten bleiben und Timing Vorhersehbarkeit. Experimente werden auf der Basis von Simulationen und formalen Analysen zu verschiedenen realistischen Anwendungsfallen und Benchmarks durchgeführt, die signifikanten Verbesserungen bei On-Chip Netzwerke-Energieeinsparungen und bei der Behandlung von Abnutzung für Systeme mit gemischter Kritikalität zur Verbesserung die Systemstabilität gegenüber dem bisherigen Status quo zeigen

Effective data parallel computing on multicore processors

The rise of chip multiprocessing or the integration of multiple general purpose processing cores on a single chip (multicores), has impacted all computing platforms including high performance, servers, desktops, mobile, and embedded processors. Programmers can no longer expect continued increases in software performance without developing parallel, memory hierarchy friendly software that can effectively exploit the chip level multiprocessing paradigm of multicores. The goal of this dissertation is to demonstrate a design process for data parallel problems that starts with a sequential algorithm and ends with a high performance implementation on a multicore platform. Our design process combines theoretical algorithm analysis with practical optimization techniques. Our target multicores are quad-core processors from Intel and the eight-SPE IBM Cell B.E. Target applications include Matrix Multiplications (MM), Finite Difference Time Domain (FDTD), LU Decomposition (LUD), and Power Flow Solver based on Gauss-Seidel (PFS-GS) algorithms. These applications are popular computation methods in science and engineering problems and are characterized by unit-stride (MM, LUD, and PFS-GS) or 2-point stencil (FDTD) memory access pattern. The main contributions of this dissertation include a cache- and space-efficient algorithm model, integrated data pre-fetching and caching strategies, and in-core optimization techniques. Our multicore efficient implementations of the above described applications outperform nai¨ve parallel implementations by at least 2x and scales well with problem size and with the number of processing cores

A Multi-One Instruction Set Computer for Microcontroller Applications

This work presents a simple integer-only instruction set architecture and microarchitecture derived from One Instruction Set Computers (OISCs) and embedding multiple execution modes ( ${m}$ OISC), capable of running at a reasonable performance level to enable basic usability in microcontroller applications. The purpose of ${m}$ OISC is to enable simple data transfer tasks and run small programs while maintaining ultimate simplicity. We present the internal organization for a computer architecture including an 8bit I/O register, and 64kB central Random Access Memory (RAM), organized in two-bytes words. The processor can run code generated assuming an OISC or a Complex Instruction Set Computer (CISC) scheme (op-code based), depending on the programmer’s demands and based on the initial setting of a register during start-up. To enable practical applications and demonstrate successful exploitation of ${m}$ OISC in view of integration in a compiler back-end, we designed a custom Proof-of-Concept (PoC) software design toolchain based on LLVM and clang. Although not targeting all the features of commercial ISA, the toolchain is capable of compiling C code from LLVM intermediate representation or generating ${m}$ OISC code translated from ARM, x86, RISC-V, and MIPS assembly. The toolchain also enables practical Value Change Dump (VCD) simulations output with graphical plots of the CPU state and associated symbols. A PoC microcontroller system has been synthesized in a low power Field Programmable Gate Array (FPGA) and verified in a basic wireless telemetry application including a Synchronous Peripheral Interface (SPI) RFM9x Long RAnge (LoRA) transceiver and a MAX30205 Inter Integrated Circuit (I2C) temperature sensor, using its 8bit I/O port, with software bus interface implementation. ${m}$ OISC occupies ~6% of resources on a Cyclone 10LP FPGA, for 1397 Adaptive Look-Up Tables (ALUTs) and 461 dedicated logic registers. The measured dynamic current consumption of the complete FPGA board with synthesized ${m}$ OISC is 12mA at 100MHz clock

Reconfigurable Antenna Systems: Platform implementation and low-power matters

Antennas are a necessary and often critical component of all wireless systems, of which they share the ever-increasing complexity and the challenges of present and emerging trends. 5G, massive low-orbit satellite architectures (e.g. OneWeb), industry 4.0, Internet of Things (IoT), satcom on-the-move, Advanced Driver Assistance Systems (ADAS) and Autonomous Vehicles, all call for highly flexible systems, and antenna reconfigurability is an enabling part of these advances. The terminal segment is particularly crucial in this sense, encompassing both very compact antennas or low-profile antennas, all with various adaptability/reconfigurability requirements. This thesis work has dealt with hardware implementation issues of Radio Frequency (RF) antenna reconfigurability, and in particular with low-power General Purpose Platforms (GPP); the work has encompassed Software Defined Radio (SDR) implementation, as well as embedded low-power platforms (in particular on STM32 Nucleo family of micro-controller). The hardware-software platform work has been complemented with design and fabrication of reconfigurable antennas in standard technology, and the resulting systems tested. The selected antenna technology was antenna array with continuously steerable beam, controlled by voltage-driven phase shifting circuits. Applications included notably Wireless Sensor Network (WSN) deployed in the Italian scientific mission in Antarctica, in a traffic-monitoring case study (EU H2020 project), and into an innovative Global Navigation Satellite Systems (GNSS) antenna concept (patent application submitted). The SDR implementation focused on a low-cost and low-power Software-defined radio open-source platform with IEEE 802.11 a/g/p wireless communication capability. In a second embodiment, the flexibility of the SDR paradigm has been traded off to avoid the power consumption associated to the relevant operating system. Application field of reconfigurable antenna is, however, not limited to a better management of the energy consumption. The analysis has also been extended to satellites positioning application. A novel beamforming method has presented demonstrating improvements in the quality of signals received from satellites. Regarding those who deal with positioning algorithms, this advancement help improving precision on the estimated position