A flexure-based kinematically decoupled micropositioning stage with a centimeter range dedicated to micro/nano manufacturing

Precision positioning stages with large strokes and high positioning accuracy are attractive for high-performance micro/nano manufacturing. This paper presents the dynamic design and characteristic investigation of a novel XY micropositioning stage. Firstly, the mechanism of the stage was introduced. The XY stage was directly driven by two linear motors, and the X- and Y- axes kinematic decoupling was realized through a novel flexible decoupling mechanism based on flexure hinges and preloaded spring. The dynamic model of the XY stage was established, and the influences of the rotational stiffness of the flexure hinge and the initial positions of the working table on the dynamic rotation of the positioning stage were investigated. The stiffness and geometric parameters of the flexure hinges were determined at the condition that the angular displacements of the working table were within ±0.5° with a motion stroke of ±25 mm. Finally the stage performance was investigated through simulation and experiments, the X- and Y-axes step responses, the rotation angular and positioning accuracy of the stage were obtained. The results show that the stage exhibits good performance and can be used for micro/nano manufacturing

A novel voice coil motor-driven compliant micropositioning stage based on flexure mechanism

This paper presents a 2-degrees of freedom flexure-based micropositioning stage with a flexible decoupling mechanism. The stage is composed of an upper planar stage and four vertical support links to improve the out-of-plane stiffness. The moving platform is driven by two voice coil motors, and thus it has the capability of large working stroke. The upper stage is connected with the base through six double parallel four-bar linkages mechanisms, which are orthogonally arranged to implement the motion decoupling in the x and y directions. The vertical support links with serially connected hook joints are utilized to guarantee good planar motion with heavy-loads. The static stiffness and the dynamic resonant frequencies are obtained based on the theoretical analyses. Finite element analysis is used to investigate the characteristics of the developed stage. Experiments are carried out to validate the established models and the performance of the developed stage. It is noted that the developed stage has the capability of translational motion stroke of 1.8 mm and 1.78 mm in working axes. The maximum coupling errors in the x and y directions are 0.65% and 0.82%, respectively, and the motion resolution is less than 200 nm. The experimental results show that the developed stage has good capability for trajectory tracking

Design and computational optimization of a flexure-based XY nano-positioning stage

This thesis presents the design and computational optimization of a two-axis nano-positioning stage. The devised stage relies on double parallelogram flexure bearings with under-constraint eliminating linkages to enable motion in the primary degrees-of-freedom. The structural parameters of the underlying flexures were optimized to provide a large-range and high bandwidth with sub-micron resolution while maintaining a compact size. A finite element model was created to establish a functional relationship between the geometry of the flexure elements and the stiffness behavior. Then, a neural network was trained from the simulation results to explore the design space with a low computational expense. The neural net was integrated with a genetic algorithm to optimize the design of the flexures for compactness and dynamic performance. The optimal solutions resulted in a reduction of stage footprint by 14% and an increase in the first natural frequency by 75% relative to a baseline design, all while preserving the same 50mm range in each axis with a factor of safety of 2. This confirms the efficacy of the proposed approach in improving stage performance through an optimization of its constituent flexures.Mechanical Engineerin

A novel actuator-internal micro/nano positioning stage with an arch-shape bridge type amplifier

This paper presents a novel actuator-internal two degree-of-freedom (2-DOF) micro/nano positioning stage actuated by piezoelectric (PZT) actuators, which can be used as a fine actuation part in dual-stage system. To compensate the positioning error of coarse stage and achieve a large motion stroke, a symmetrical structure with an arch-shape bridge type amplifier based on single notch circular flexure hinges is proposed and utilized in the positioning stage. Due to the compound bridge arm configuration and compact flexure hinge structure, the amplification mechanism can realize high lateral stiffness and compact structure simultaneously, which is of great importance to protect PZT actuators. The amplification mechanism is integrated into the decoupling mechanism to improve compactness, and to produce decoupled motion in X- and Y- axes. An analytical model is established to explore the static and dynamic characteristics, and the geometric parameters are optimized. The performance of the positioning stage is evaluated through finite element analysis (FEA) and experimental test. The results indicate that the stage can implement 2-DOF decoupled motion with a travel range of 55.4×53.2 μm2, and the motion resolution is 8 nm. The stage can be used in probe tip-based micro/nano scratching

PKM mechatronic clamping adaptive device

This study proposes a novel adaptive fixturing device based on active clamping systems for smart micropositioning of thin-walled precision parts. The modular architecture and the structure flexibility make the system suitable for various industrial applications. The proposed device is realized as a Parallel Kinematic Machine (PKM), opportunely sensorized and controlled, able to perform automatic error-free workpiece clamping procedures, drastically reducing the overall fixturing set-up time. The paper describes the kinematics and dynamics of this mechatronic system. A first campaign of experimental trails has been carried out on the prototype, obtaining promising results

Conceptual designs of multi-degree of freedom compliant parallel manipulators composed of wire-beam based compliant mechanisms

This paper proposes conceptual designs of multi-degree(s) of freedom (DOF) compliant parallel manipulators (CPMs) including 3-DOF translational CPMs and 6-DOF CPMs using a building block based pseudo-rigid-body-model (PRBM) approach. The proposed multi-DOF CPMs are composed of wire-beam based compliant mechanisms (WBBCMs) as distributed-compliance compliant building blocks (CBBs). Firstly, a comprehensive literature review for the design approaches of compliant mechanisms is conducted, and a building block based PRBM is then presented, which replaces the traditional kinematic sub-chain with an appropriate multi-DOF CBB. In order to obtain the decoupled 3-DOF translational CPMs (XYZ CPMs), two classes of kinematically decoupled 3-PPPR (P: prismatic joint, R: revolute joint) translational parallel mechanisms (TPMs) and 3-PPPRR TPMs are identified based on the type synthesis of rigid-body parallel mechanisms, and WBBCMs as the associated CBBs are further designed. Via replacing the traditional actuated P joint and the traditional passive PPR/PPRR sub-chain in each leg of the 3-DOF TPM with the counterpart CBBs (i.e. WBBCMs), a number of decoupled XYZ CPMs are obtained by appropriate arrangements. In order to obtain the decoupled 6-DOF CPMs, an orthogonally-arranged decoupled 6-PSS (S: spherical joint) parallel mechanism is first identified, and then two example 6-DOF CPMs are proposed by the building block based PRBM method. It is shown that, among these designs, two types of monolithic XYZ CPM designs with extended life have been presented

Design of 3-legged XYZ compliant parallel manipulators with minimised parasitic rotations

This paper deals with the design of 3-legged distributed-compliance XYZ compliant parallel manipulators (CPMs) with minimised parasitic rotations, based on the kinematically decoupled 3-PPPRR (P: prismatic joint, and R: revolute joint) and 3-PPPR translational parallel mechanisms (TPMs). The designs are firstly proposed using the kinematic substitution approach, with the help of the stiffness center (SC) overlapping based approach. This is done by an appropriate embedded arrangement so that all of the SCs associated with the passive compliant modules overlap at the point where all of the input forces applied at the input stages intersect. Kinematostatic modelling and characteristic analysis are then carried out for the proposed large-range 3-PPPRR XYZ CPM with overlapping SCs. The results from finite element analysis (FEA) are compared to the characteristics found for the developed analytical models, as are experimental testing results (primary motion) from the prototyped 3-PPPRR XYZ CPM with overlapping SCs. Finally, issues on large-range motion and dynamics of such designs are discussed, as are possible improvements of the actuated compliant P joint. It is shown that the potential merits of the designs presented here include a) minimised parasitic rotations by only using three identical compliant legs; b) compact configurations and small size due to the use of embedded designs; c) approximately kinematostatically decoupled designs capable of easy controls; and d) monolithic fabrication for each leg using existing planar manufacturing technologies such as electric discharge machining (EDM)

Affordable flexible hybrid manipulator for miniaturised product assembly

Miniaturised assembly systems are capable of assembling parts of a few millimetres in size with an accuracy of a few micrometres. Reducing the size and the cost of such a system while increasing its flexibility and accuracy is a challenging issue. The introduction of hybrid manipulation, also called coarse/fine manipulation, within an assembly system is the solution investigated in this thesis. A micro-motion stage (MMS) is designed to be used as the fine positioning mechanism of the hybrid assembly system. MMSs often integrate compliant micro-motion stages (CMMSs) to achieve higher performances than the conventional MMSs. CMMSs are mechanisms that transmit an output force and displacement through the deformation of their structure. Although widely studied, the design and modelling techniques of these mechanisms still need to be improved and simplified. Firstly, the linear modelling of CMMSs is evaluated and two polymer prototypes are fabricated and characterised. It is found that polymer based designs have a low fabrication cost but not suitable for construction of a micro-assembly system. A simplified nonlinear model is then derived and integrated within an analytical model, allowing for the full characterisation of the CMMS in terms of stiffness and range of motion. An aluminium CMMS is fabricated based on the optimisation results from the analytical model and is integrated within an MMS. The MMS is controlled using dual-range positioning to achieve a low-cost positioning accuracy better than 2µm within a workspace of 4.4×4.4mm2. Finally, a hybrid manipulator is designed to assemble mobile-phone cameras and sensors automatically. A conventional robot manipulator is used to pick and place the parts in coarse mode while the aluminium CMMS based MMS is used for fine alignment of the parts. A high-resolution vision system is used to locate the parts on the substrate and to measure the relative position of the manipulator above MMS using a calibration grid with square patterns. The overall placement accuracy of the assembly system is ±24µm at 3σ and can reach 2µm, for a total cost of less than £50k, thus demonstrating the suitability of hybrid manipulation for desktop-size miniaturised assembly systems. The precision of the existing system could be significantly improved by making the manipulator stiffer (i.e. preloaded bearings…) and adjustable to compensate for misalignment. Further improvement could also be made on the calibration of the vision system. The system could be either scaled up or down using the same architecture while adapting the controllers to the scale.Engineering and Physical Sciences Research Council (EPSRC