563 research outputs found
A Study of Medium Access Control Protocols for Wireless Body Area Networks
The seamless integration of low-power, miniaturised, invasive/non-invasive
lightweight sensor nodes have contributed to the development of a proactive and
unobtrusive Wireless Body Area Network (WBAN). A WBAN provides long-term health
monitoring of a patient without any constraint on his/her normal dailylife
activities. This monitoring requires low-power operation of
invasive/non-invasive sensor nodes. In other words, a power-efficient Medium
Access Control (MAC) protocol is required to satisfy the stringent WBAN
requirements including low-power consumption. In this paper, we first outline
the WBAN requirements that are important for the design of a low-power MAC
protocol. Then we study low-power MAC protocols proposed/investigated for WBAN
with emphasis on their strengths and weaknesses. We also review different
power-efficient mechanisms for WBAN. In addition, useful suggestions are given
to help the MAC designers to develop a low-power MAC protocol that will satisfy
the stringent WBAN requirements.Comment: 13 pages, 8 figures, 7 table
Transmission Delay of Multi-hop Heterogeneous Networks for Medical Applications
Nowadays, with increase in ageing population, Health care market keeps
growing. There is a need for monitoring of Health issues. Body Area Network
consists of wireless sensors attached on or inside human body for monitoring
vital Health related problems e.g, Electro Cardiogram (ECG),
ElectroEncephalogram (EEG), ElectronyStagmography(ENG) etc. Data is recorded by
sensors and is sent towards Health care center. Due to life threatening
situations, timely sending of data is essential. For data to reach Health care
center, there must be a proper way of sending data through reliable connection
and with minimum delay. In this paper transmission delay of different paths,
through which data is sent from sensor to Health care center over heterogeneous
multi-hop wireless channel is analyzed. Data of medical related diseases is
sent through three different paths. In all three paths, data from sensors first
reaches ZigBee, which is the common link in all three paths. After ZigBee there
are three available networks, through which data is sent. Wireless Local Area
Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX),
Universal Mobile Telecommunication System (UMTS) are connected with ZigBee.
Each network (WLAN, WiMAX, UMTS) is setup according to environmental
conditions, suitability of device and availability of structure for that
device. Data from these networks is sent to IP-Cloud, which is further
connected to Health care center. Main aim of this paper is to calculate delay
of each link in each path over multihop wireless channel.Comment: BioSPAN with 7th IEEE International Conference on Broadband and
Wireless Computing, Communication and Applications (BWCCA 2012), Victoria,
Canada, 201
Analyzing Delay in Wireless Multi-hop Heterogeneous Body Area Networks
With increase in ageing population, health care market keeps growing. There
is a need for monitoring of health issues. Wireless Body Area Network (WBAN)
consists of wireless sensors attached on or inside human body for monitoring
vital health related problems e.g, Electro Cardiogram (ECG), Electro
Encephalogram (EEG), ElectronyStagmography (ENG) etc. Due to life threatening
situations, timely sending of data is essential. For data to reach health care
center, there must be a proper way of sending data through reliable connection
and with minimum delay. In this paper transmission delay of different paths,
through which data is sent from sensor to health care center over heterogeneous
multi-hop wireless channel is analyzed. Data of medical related diseases is
sent through three different paths. In all three paths, data from sensors first
reaches ZigBee, which is the common link in all three paths. Wireless Local
Area Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX),
Universal Mobile Telecommunication System (UMTS) are connected with ZigBee.
Each network (WLAN, WiMAX, UMTS) is setup according to environmental
conditions, suitability of device and availability of structure for that
device. Data from these networks is sent to IP-Cloud, which is further
connected to health care center. Delay of data reaching each device is
calculated and represented graphically. Main aim of this paper is to calculate
delay of each link in each path over multi-hop wireless channel.Comment: arXiv admin note: substantial text overlap with arXiv:1208.240
A Review of Wireless Body Area Networks for Medical Applications
Recent advances in Micro-Electro-Mechanical Systems (MEMS) technology,
integrated circuits, and wireless communication have allowed the realization of
Wireless Body Area Networks (WBANs). WBANs promise unobtrusive ambulatory
health monitoring for a long period of time and provide real-time updates of
the patient's status to the physician. They are widely used for ubiquitous
healthcare, entertainment, and military applications. This paper reviews the
key aspects of WBANs for numerous applications. We present a WBAN
infrastructure that provides solutions to on-demand, emergency, and normal
traffic. We further discuss in-body antenna design and low-power MAC protocol
for WBAN. In addition, we briefly outline some of the WBAN applications with
examples. Our discussion realizes a need for new power-efficient solutions
towards in-body and on-body sensor networks.Comment: 7 pages, 7 figures, and 3 tables. In V3, the manuscript is converted
to LaTe
Simulation Analysis of Medium Access Techniques
This paper presents comparison of Access Techniques used in Medium Access
Control (MAC) protocol for Wireless Body Area Networks (WBANs). Comparison is
performed between Time Division Multiple Access (TDMA), Frequency Division
Multiple Access (FDMA), Carrier Sense Multiple Access with Collision Avoidance
(CSMA/CA), Pure ALOHA and Slotted ALOHA (S-ALOHA). Performance metrics used for
comparison are throughput (T), delay (D) and offered load (G). The main goal
for comparison is to show which technique gives highest Throughput and lowest
Delay with increase in Load. Energy efficiency is major issue in WBAN that is
why there is need to know which technique performs best for energy conservation
and also gives minimum delay.Comment: NGWMN with 7th IEEE International Conference on Broadband and
Wireless Computing, Com- munication and Applications (BWCCA 2012), Victoria,
Canada, 201
Wireless Sensor Networking in Challenging Environments
Recent years have witnessed growing interest in deploying wireless sensing applications in real-world environments. For example, home automation systems provide fine-grained metering and control of home appliances in residential settings. Similarly, assisted living applications employ wireless sensors to provide continuous health and wellness monitoring in homes. However, real deployments of Wireless Sensor Networks (WSNs) pose significant challenges due to their low-power radios and uncontrolled ambient environments. Our empirical study in over 15 real-world apartments shows that low-power WSNs based on the IEEE 802.15.4 standard are highly susceptible to external interference beyond user control, such as Wi-Fi access points, Bluetooth peripherals, cordless phones, and numerous other devices prevalent in residential environments that share the unlicensed 2.4 GHz ISM band with IEEE 802.15.4 radios.
To address these real-world challenges, we developed two practical wireless network protocols including the Adaptive and Robust Channel Hopping (ARCH) protocol and the Adaptive Energy Detection Protocol (AEDP). ARCH enhances network reliability through opportunistically changing radio\u27s frequency to avoid interference and environmental noise and AEDP reduces false wakeups in noisy wireless environments by dynamically adjusting the wakeup threshold of low-power radios.
Another major trend in WSNs is the convergence with smart phones. To deal with the dynamic wireless conditions and varying application requirements of mobile users, we developed the Self-Adapting MAC Layer (SAML) to support adaptive communication between smart phones and wireless sensors. SAML dynamically selects and switches Medium Access Control protocols to accommodate changes in ambient conditions and application requirements.
Compared with the residential and personal wireless systems, industrial applications pose unique challenges due to their critical demands on reliability and real-time performance. We developed an experimental testbed by realizing key network mechanisms of industrial Wireless Sensor and Actuator Networks (WSANs) and conducted an empirical study that revealed the limitations and potential enhancements of those mechanisms. Our study shows that graph routing is more resilient to interference and its backup routes may be heavily used in noisy environments, which demonstrate the necessity of path diversity for reliable WSANs. Our study also suggests that combining channel diversity with retransmission may effectively reduce the burstiness of transmission failures and judicious allocation of multiple transmissions in a shared slot can effectively improve network capacity without significantly impacting reliability
- …