17 research outputs found

    Software Defined Channel Sounder for Power Line Communications

    Get PDF
    Most power line channel sounders are based on expensive lab instruments. This work presents an alternative based on software defined radio platforms. These can be later also employed as communication modems, decreasing costs and deployment times. We implemented and evaluated two channel sounding techniques: frequency hopping and sliding correlator. The results suggest that frequency hopping might be a better candidate for power line channels due to the expected low signal-to-noise ratio

    Characterization and modeling of the channel and noise for broadband indoor Power Line Communication (PLC) networks.

    Get PDF
    Doctor of Philosophy in Electronic Engineering. University of KwaZulu-Natal, Durban 2016Power Line Communication (PLC) is an interesting approach in establishing last mile broadband access especially in rural areas. PLC provides an already existing medium for broadband internet connectivity as well as monitoring and control functions for both industrial and indoor usage. PLC network is the most ubiquitous network in the world reaching every home. However, it presents a channel that is inherently hostile in nature when used for communication purposes. This hostility is due to the many problematic characteristics of the PLC from a data communications’ perspective. They include multipath propagation due to multiple reflections resulting from impedance mismatches and cable joints, as well as the various types of noise inherent in the channel. Apart from wireless technologies, current high data rate services such as high speed internet are provided through optical fibre links, Ethernet, and VDSL (very-high-bit-rate digital subscriber line) technology. The deployment of a wired network is costly and demands physical effort. The transmission of high frequency signals over power lines, known as power line communications (PLC), plays an important role in contributing towards global goals for broadband services inside the home and office. In this thesis we aim to contribute to this ideal by presenting a powerline channel modeling approach which describes a powerline network as a lattice structure. In a lattice structure, a signal propagates from one end into a network of boundaries (branches) through numerous paths characterized by different reflection/transmission properties. Due to theoretically infinite number of reflections likely to be experienced by a propagating wave, we determine the optimum number of paths required for meaningful contribution towards the overall signal level at the receiver. The propagation parameters are obtained through measurements and other model parameters are derived from deterministic power system. It is observed that the notch positions in the transfer characteristics are associated with the branch lengths in the network. Short branches will result in fewer notches in a fixed bandwidth as compared to longer branches. Generally, the channel attenuation increase with network size in terms of number of branches. The proposed model compares well with experimental data. This work presents another alternative approach to model the transfer characteristics of power lines for broadband power line communication. The model is developed by considering the power line to be a two-wire transmission line and the theory of transverse electromagnetic (TEM) wave propagation. The characteristic impedance and attenuation constant of the power line are determined through measurements. These parameters are used in model simplification and determination of other model parameters for typical indoor multi-tapped transmission line system. The transfer function of the PLC channel is determined by considering the branching sections as parallel resonant circuits (PRC) attached to the main line. The model is evaluated through comparison with measured transfer characteristics of known topologies and it is in good agreement with measurements. Apart from the harsh topology of power line networks, the presence of electrical appliances further aggravates the channel conditions by injecting various types of noises into the system. This thesis also discusses the process of estimating powerline communication (PLC) asynchronous impulsive noise volatility by studying the conditional variance of the noise time series residuals. In our approach, we use the Generalized Autoregressive Conditional Heteroskedastic (GARCH) models on the basis that in our observations, the noise time series residuals indicate heteroskedasticity. By performing an ordinary least squares (OLS) regression of the noise data, the empirical results show that the conditional variance process is highly persistent in the residuals. The variance of the error terms are not uniform, in fact, the error terms are larger at some portions of the data than at other time instances. Thus, PLC impulsive noise often exhibit volatility clustering where the noise time series is comprised of periods of high volatility followed by periods of high volatility and periods of low volatility followed by periods of low volatility. The burstiness of PLC impulsive noise is therefore not spread randomly across the time period, but instead has a degree of autocorrelation. This provides evidence of time-varying conditional second order moment of the noise time series. Based on these properties, the noise time series data is said to suffer from heteroskedasticity. GARCH models addresses the deficiencies of common regression models such as Autoregressive Moving Average (ARMA) which models the conditional expectation of a process given the past, but regards the past conditional variances to be constant. In our approach, we predict the time-varying volatility by using past time-varying variances in the error terms of the noise data series. Subsequent variances are predicted as a weighted average of past squared residuals with declining weights that never completely diminish. The parameter estimates of the model indicates a high degree of persistence in conditional volatility of impulsive noise which is a strong evidence of explosive volatility. Parameter estimation of linear regression models usually employs least squares (LS) and maximum likelihood (ML) estimators. While maximum likelihood remains one of the best estimators within the classical statistics paradigm to date, it is highly reliant on the assumption about the joint probability distribution of the data for optimal results. In our work, we use the Generalized Method of Moments (GMM) to address the deficiencies of LS/ML in order to estimate the underlying data generating process (DGP). We use GMM as a statistical technique that incorporate observed noise data with the information in population moment conditions to determine estimates of unknown parameters of the underlying model. Periodic impulsive noise (short-term) has been measured, deseasonalized and modeled using GMM. The numerical results show that the model captures the noise process accurately. Usually, the impulsive signals originates from connected loads in an electrical power network can often be characterized as cyclostationary processes. A cyclostationary process is described as a non-stationary process whose statistics exhibit periodic time variation, and therefore can be described by virtue of its periodic order. The focus of this chapter centres on the utilization of cyclic spectral analysis technique for identification and analysis of the second-order periodicity (SOP) of time sequences like those which are generated by electrical loads connected in the vicinity of a power line communications receiver. Analysis of cyclic spectrum generally incorporates determining the random features besides the periodicity of impulsive noise, through the determination of the spectral correlation density (SCD). Its effectiveness on identifying and analysing cyclostationary noise is substantiated in this work by processing data collected at indoor low voltage sites

    Characterization and modelling of the channel and noise for broadband indoor powerline communication (plc.) networks.

    Get PDF
    Masters degree. University of KwaZulu-Natal, Durban.Power Line Communication (PLC) is an interesting approach in establishing last mile broad band access especially in rural areas. PLC provides an already existing medium for broad band internet connectivity as well as monitoring and control functions for both industrial and indoor usage. PLC network is the most ubiquitous network in the world reaching every home. However, it presents a channel that is inherently hostile in nature when used for communication purposes. This hostility is due to the many problematic characteristics of the PLC from a data communications’ perspective. They include multipath propagation due to multiple reflections resulting from impedance mismatches and cable joints, as well as the various types of noise inherent in the channel. Apart from wireless technologies, current high data rate services such as high speed internet are provided through optical fibre links, Ethernet, and VDSL (very-high-bit-rate digital subscriber line) technology. The deployment of a wired network is costly and demands physical effort. The transmission of high frequency signals over power lines, known as power line communications (PLC), plays an important role in contributing towards global goals for broadband services inside the home and office. In this thesis we aim to contribute to this ideal by presenting a powerline channel modeling approach which describes a powerline network as a lattice structure. In a lattice structure, a signal propagates from one end into a network of boundaries (branches) through numerous paths characterized by different reflection/transmission properties. Due to theoretically infi nite number of reflections likely to be experienced by a propagating wave, we determine the optimum number of paths required for meaningful contribution towards the overall signal level at the receiver. The propagation parameters are obtained through measurements and other model parameters are derived from deterministic power system. It is observed that the notch positions in the transfer characteristics are associated with the branch lengths in the network. Short branches will result in fewer notches in a fixed bandwidth as compared to longer branches. Generally, the channel attenuation increase with network size in terms of number of branches. The proposed model compares well with experimental data. This work presents another alternative approach to model the transfer characteristics of power lines for broadband power line communication. The model is developed by considering the power line to be a two-wire transmission line and the theory of transverse electromagnetic (TEM) wave propagation. The characteristic impedance and attenuation constant of the power line v are determined through measurements. These parameters are used in model simplification and determination of other model parameters for typical indoor multi-tapped transmission line system. The transfer function of the PLC channel is determined by considering the branching sections as parallel resonant circuits (PRC) attached to the main line. The model is evaluated through comparison with measured transfer characteristics of known topologies and it is in good agreement with measurements. Apart from the harsh topology of power line networks, the presence of electrical appliances further aggravates the channel conditions by injecting various types of noises into the system. This thesis also discusses the process of estimating powerline communication (PLC) asynchronous impulsive noise volatility by studying the conditional variance of the noise time series residuals. In our approach, we use the Generalized Autoregressive Conditional Heteroskedastic (GARCH) models on the basis that in our observations, the noise time series residuals indicate heteroskedasticity. By per forming an ordinary least squares (OLS) regression of the noise data, the empirical results show that the conditional variance process is highly persistent in the residuals. The variance of the error terms are not uniform, in fact, the error terms are larger at some portions of the data than at other time instances. Thus, PLC impulsive noise often exhibit volatility clustering where the noise time series is comprised of periods of high volatility followed by periods of high volatility and periods of low volatility followed by periods of low volatility. The burstiness of PLC impulsive noise is therefore not spread randomly across the time period, but instead has a degree of autocorrelation. This provides evidence of time-varying conditional second order moment of the noise time series. Based on these properties, the noise time series data is said to suffer from heteroskedasticity. GARCH models addresses the deficiencies of common regression models such as Autoregressive Moving Average (ARMA) which models the conditional expectation of a process given the past, but regards the past conditional variances to be constant. In our approach, we predict the time-varying volatility by using past time-varying variances in the error terms of the noise data series. Subsequent variances are predicted as a weighted average of past squared residuals with declining weights that never completely diminish. The parameter estimates of the model indicates a high de gree of persistence in conditional volatility of impulsive noise which is a strong evidence of explosive volatility. Parameter estimation of linear regression models usually employs least squares (LS) and maximum likelihood (ML) estimators. While maximum likelihood remains one of the best estimators within the classical statistics paradigm to date, it is highly reliant vi on the assumption about the joint probability distribution of the data for optimal results. In our work, we use the Generalized Method of Moments (GMM) to address the deficien cies of LS/ML in order to estimate the underlying data generating process (DGP). We use GMM as a statistical technique that incorporate observed noise data with the information in population moment conditions to determine estimates of unknown parameters of the under lying model. Periodic impulsive noise (short-term) has been measured, deseasonalized and modeled using GMM. The numerical results show that the model captures the noise process accurately. Usually, the impulsive signals originates from connected loads in an electrical power network can often be characterized as cyclostationary processes. A cyclostationary process is described as a non-stationary process whose statistics exhibit periodic time varia tion, and therefore can be described by virtue of its periodic order. The focus of this chapter centres on the utilization of cyclic spectral analysis technique for identification and analysis of the second-order periodicity (SOP) of time sequences like those which are generated by electrical loads connected in the vicinity of a power line communications receiver. Analysis of cyclic spectrum generally incorporates determining the random features besides the pe riodicity of impulsive noise, through the determination of the spectral correlation density (SCD). Its effectiveness on identifying and analysing cyclostationary noise is substantiated in this work by processing data collected at indoor low voltage sites

    Transmission haut-débit sur les réseaux d'énergie: principes physiques et compatibilité électromagnétique

    Get PDF
    Power Line Communications consist of transmitting data by reusing the existing powerline as a propagation medium. Powerline networks represent a challenging environment for broadband communications, since they have not been designed for the transmission of high frequency signals. This Habilitation degree thesis presents our research on transmission physics and electromagnetic compatibility for in-home powerline networks. This research has been conducted since 2007 in the framework of a collaboration between Orange Labs and Telecom Bretagne, involving my supervision of three Ph.D. theses defended in 2012, 2013 and 2015, as the principal advisor.La technologie Courant Porteur en Ligne consiste à transmettre des données en réutilisant le réseau électrique classique en tant que support de propagation. Les réseaux d'énergie sont des environnements difficiles pour les communications à haut débit, car ils n'ont pas été conçus pour la transmission d'un signal à haute fréquence. Ce mémoire d'Habilitation à Diriger des Recherches présente mes travaux concernant la physique de la transmission et les aspects de Compatibilité Electro-Magnétique (CEM) pour le réseau électrique domestique. Ils ont été réalisés à partir de 2007 dans le cadre d'une collaboration entre Orange Labs et Telecom Bretagne, notamment à travers trois thèses soutenues en 2012, 2013 et 2015. Après une introduction générale à la technologie CPL, le manuscrit décrit l'environnement de propagation dans les réseaux d'énergie en termes de canal et de bruit électromagnétique. Les principes de la modélisation du canal CPL sont illustrés à partir de la problématique d'identification des trajets de propagation. L'une des principales évolutions du domaine concerne l'application de la technologie Multiple Input Multiple Output (MIMO) aux communications sur réseaux d'énergie. Nos études expérimentales ont démontré que l'adaptation de cette technique issue du domaine de la radio permet un doublement de la capacité de transmission. Nous présentons les campagnes de mesure réalisées au sein d'Orange Labs et du groupe Specialist Task Force 410 de l'ETSI. A partir de ces données, des modèles statistiques de canal de propagation MIMO et de bruit multi-capteurs ont été élaborés. En termes d'émission électromagnétique, la bande utilisée par les systèmes CPL est déjà occupée par d'autres services (radio amateur, radiodiffusion en ondes courtes). Nous décrivons les contraintes CEM des systèmes CPL et abordons les techniques de CEM cognitive, consistant à optimiser les ressources spectrales en tenant compte de la connaissance de l'environnement du système. En particulier, la technique de retournement temporel est étudiée pour la mitigation du rayonnement involontaire et sa performance est étudiée de manière expérimentale. Enfin, le manuscrit présente la problématique de l'efficacité énergétique des systèmes CPL. Nous présentons les mesures expérimentales réalisées afin de modéliser la consommation de modems classiques et MIMO. D'autre part, la configuration de communication en relais a été étudiée, afin d'évaluer le gain de ce mode de transmission en termes de consommation énergétique. A l'avenir, ces travaux pourront être étendus aux réseaux de distribution en basse et moyenne tension, pour le développement et l'optimisation des réseaux d'énergie intelligents, ou Smart Grids

    Abstracts on Radio Direction Finding (1899 - 1995)

    Get PDF
    The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

    Space transportation system user handbook

    Get PDF

    Electromagnetic compatibility of power line communication systems

    Get PDF
    The power system has been used for communication purposes for many decades, although it was mainly the power utility companies that used low bit rates for control and monitoring purposes. In the last ten years, however, the deregulation of the power and telecommunication markets has spurred the idea of using and commercializing the power networks for a range of new communication applications and services. The idea has been developed and implemented into both, narrowband and broadband systems, which are defined in terms of the operation frequency band. Depending on the frequency band, the systems over powerlines can be: Narrow-band. They use frequencies ranging from 3-148.5 kHz in Europe, with the upper frequency extending up to 500 kHz in the United States and Japan. In Europe, this frequency range is standardized by CENELEC Standard EN 50065. Broadband. The used frequency range is 1-30MHz; 1-15MHz for outdoor systems and 15-30MHz for indoor systems. In this frequency range, the standardization situation is still unclear and there exist no regulations. The developed applications and systems use different parts of the power network: medium voltage (MV) and low voltage (LV) cabling for outdoor applications and building cabling for indoor applications. These cables are designed and optimized for power transmission at frequencies of 50/60Hz and represent a hostile medium for transmissions at higher frequencies. This thesis concentrates on electromagnetic compatibility (EMC) aspects and some optimization issues of the broadband systems, currently known as Powerline Communications (PLC) or Broadband Power Line (BPL). The work presented here was preformed in the framework of the European project OPERA (http://www.ist-opera.org/). A short description of the project is given in Chapter 1. The second chapter presents the basis, introduction, description and state of the art of the topics of interest for this thesis. That chapter is divided into three parts. Each of these parts starts with a short introduction to the topic to be addressed. The introductions are intended for those not familiar with the topic at hand and they can be skipped by those already knowledgeable of it. The first part of Chapter 2 gives an overview and introduction to telecommunication issues relevant to the thesis, as well as the general technical specifications of the OPERA system. The second part deals with the transmission medium which, for the case of PLC, is the power system. The fundamentals and the different components of the PLC system are given there and the state of the art regarding the transmission channel is presented. The third part deals with the EMC and standardization issues related to the technology. The main contributions of the thesis are presented in chapters 3 to 7. The PLC technology distinguishes itself from other technologies in that it uses already existing, ubiquitous wiring, so that no new infrastructure is needed. On the other hand, using a channel designed originally for other purposes means that it is not optimized for the frequencies and applications of interest for broadband transmission. If PLC is to compete with other technologies, these problems have to be well understood and solved, so that the system can be optimized by taking into account the parameters and constrains of the already existing medium. Although the PLC system is being improved continuously, there are still concerns about emissions, immunity and standardization. These issues are important since PLC operates in an environment already populated by other services at the same frequencies, so that fair co-existence is needed. Moreover, the PLC modem has a combined mains and telecom port and, as a consequence, the standards for conducted emissions from those two types of ports are not directly applicable. In addition, the symmetry of the cables used is low and, therefore, emissions are higher than, for example, emissions from twisted pair cables used in xDSL. A good understanding of emissions and immunity in PLC systems is therefore of great importance for the optimization of the system and for EMC standardization to be based on objective technical criteria. Even if the basic phenomena are essentially the same as for any other wire transmission system, the complexity and variability of the topologies of existing structures is so large that simple, straightforward solutions are often not applicable. Emissions from the cabling are primarily due to the common mode signals. Part of the energy in this mode is injected by the imperfectly balanced output stages of the PLC modems themselves. In addition, the common mode appears at punctual imbalanced discontinuities and distributed asymmetry along the PLC signal path in the power cables. Chapter 3 presents the work performed to improve our understanding of the sources of the common-mode current and the parameters that influence its behavior, including related measurements and simulations. For the purpose of this study, a model house was built at the EPFL's test site. Different cablings were used to study the influence of different parameters on the behavior of the common-mode current since it is the main source for both types of emissions, conducted and radiated ones. The influence of different parameters such as the cable terminations, the symmetry of the termination, the height of the conductors above the ground, the presence of power outlets, switches, empty and occupied sockets and the topology, are analyzed. The data are also used to test two methods used to simulate the differential-to-common-mode conversion and the conducted emissions, namely the transmission line model and the full wave approach provided by the Method of Moments through the Numerical Electromagnetic Code (NEC). In Chapter 4, problems related to PLC immunity testing are treated. We show that the conversion of the differential mode to the common mode is coupled with the reverse conversion by reciprocity. Due to the low symmetry of PLC cabling, part of the injected common mode test signal is converted into a differential mode signal that interferes with the wanted signal at the input of the modem being tested. Depending on the actual symmetry of the Coupling-Decoupling Network (CDN), not specified in the standards, the immunity test may yield erroneous results due to the effect of this differential mode component. Working under the assumption that the CDN is built to exhibit a symmetry similar to that of PLC networks as inferred from its longitudinal conversion loss, we estimate the differential mode disturbance level that the modems should withstand from a narrowband interferer. The bit error rate induced by the presence of the disturbing differential mode current from the CDN is also estimated, for a total physical channel transmission rate of 200 Mbps, to be of the order of 1×10-5 to 5×10-5. Since these rates can be handled by error correcting coding and MAC ARQ procedures, it is concluded that the modems are not likely to suffer any severe performance degradation due to immunity testing if the CDN exhibits a symmetry similar to that of PLC networks. Simulating the complete PLC network or any significant part of it using numerical techniques such as the method of moments proves to be of limited practical use due to the fact that PLC networks extend over many wavelengths. The transmission line approximation, on the other hand, although more efficient and sufficiently accurate for differential mode calculations, is not directly applicable to simulate the EMC behavior since it neglects the antenna-mode currents that are significant contributors to the radiated emissions. Chapter 5 presents a novel approach to evaluate the antenna-mode currents using a modified transmission line theory, thus making this numerically efficient technique applicable to the estimation of emissions in PLC. An integral equation describing the antenna-mode currents along a two-wire transmission line is derived. It is further shown that, when the line cross-sectional dimensions are electrically small, the integral equation reduces to a pair of transmission line-like equations with equivalent line parameters (per-unit-length inductance and capacitance). The derived equations make it possible to compute the antenna mode currents using a traditional transmission line code with appropriate parameters. The derived equations are tested versus numerical results obtained using NEC and reasonably good agreement is found. Another important EMC issue related to PLC is the mitigation of emissions. Chapter 6 describes a technique that has been proposed to achieve a reduction of emissions associated with indoor PLC networks through the introduction of a 180° out-of-phase replica of the PLC signal into the unused neutral-ground circuit. A modification to this technique is proposed based on the selection of the appropriate amplitude and phase of the auxiliary signal, allowing a higher degree of field attenuation. A way of implementing this technique is proposed and studied, namely the integration of a required antenna into the PLC modems themselves. The measured fields very close to the modem allow the determination of the magnitude and phase of the compensation voltage. The proposed implementation should be used only to handle customer complaints, when emissions should be lowered at locations where PLC signals might cause unwanted interference or when additional capacity is required and it can be obtained through the gained signal to noise margin. Although, in principle, due to nonalignment of the wanted and the compensation field directions, minimizing one component of the field may result in an increase of the other components, we show that the application of the technique results in an overall average reduction of 10-20 dB of all the field components in the region of interest. In the same Chapter 6, we address the more general issue of the application of mitigation techniques' gained emissions margin to increase the overall throughput of PLC systems. We show that an increase in the signal power (made possible by the inclusion of mitigation techniques) leads to a considerable increase in the PLC channel capacity. Using a number of simplifications, we show that the capacity of the channel can indeed be increased by up to 66 Mbps for mitigation efficiencies of only 10 dB. We also present the results of laboratory measurements aimed at studying, under controlled conditions, different characteristics of notching in OPERA PLC modems, such as total and effective notch width, notch depth, maximum notch depth, etc. These measurements show that it is possible to obtain attenuations of up to about 45 dB for notches in all frequency bands, 10MHz, 20MHz and 30MHz. What differs for these three bands is the minimum number of carriers that need to be notched to obtain that maximum attenuation. This is an important point, since, to implement notches that have the required depth and width, one must know how many subcarriers to suppress and how deep these need to be reduced. High density PLC deployment requires the increase of overall system data rate. To achieve the higher data rates, frequency reuse in these systems is needed. In Chapter 7, we present the idea for using so-called blocking filters as a possible solution for a frequency reuse. Experimental data obtained on a real distribution network show that the use of blocking filters can, in certain cases, ensure high enough RF separation of the LV feeders belonging to the same substation. In some cases, even with the possibility to design and integrate effective blocking filters, the system needs to provide additional synchronization mechanisms for frequency reuse

    Space transportation system. User handbook

    Get PDF

    Cumulative index to NASA Tech Briefs, 1986-1990, volumes 10-14

    Get PDF
    Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This cumulative index of Tech Briefs contains abstracts and four indexes (subject, personal author, originating center, and Tech Brief number) and covers the period 1986 to 1990. The abstract section is organized by the following subject categories: electronic components and circuits, electronic systems, physical sciences, materials, computer programs, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

    Design and Implementation of a Wideband Channel Sounder for Low-Voltage Powerlines

    No full text
    Estimating the input-output behavior of low voltage powerline channels for indoor high speed data communications requires the availability of proper wideband channel sounding tools. In fact, the properties of real world powerline channels are substantially different from those commonly exhibited by their wireless counterparts, so that standard methods for wireless channel sounding cannot be adapted to a powerline scenario. In this paper, after providing some general design guidelines for powerline channel sounding, a detailed description of a FPGA-based implementation of a wideband powerline channel sounder is provided. Such a tool is based on low cost hardware and is flexible, since it can be easily customized to user needs using a set of simple graphical user interfaces. Some of its specific applications, namely the estimation of the time-varying transfer function of an indoor powerline channel and the evaluation of the power spectral density of the noise affecting it, are illustrated to show the potentialities of the developed equipment
    corecore