Topology Construction in RPL Networks over Beacon-Enabled 802.15.4

In this paper, we propose a new scheme that allows coupling beacon-enabled IEEE 802.15.4 with the RPL routing protocol while keeping full compliance with both standards. We provide a means for RPL to pass the routing information to Layer 2 before the 802.15.4 topology is created by encapsulating RPL DIO messages in beacon frames. The scheme takes advantage of 802.15.4 command frames to solicit RPL DIO messages. The effect of the command frames is to reset the Trickle timer that governs sending DIO messages. We provide a detailed analysis of the overhead incurred by the proposed scheme to understand topology construction costs. We have evaluated the scheme using Contiki and the instruction-level Cooja simulator and compared our results against the most common scheme used for dissemination of the upper-layer information in beacon-enabled PANs. The results show energy savings during the topology construction phase and in the steady state

A Smart Game for Data Transmission and Energy Consumption in the Internet of Things

The current trend in developing smart technology for the Internet of Things (IoT) has motivated a lot of research interest in optimizing data transmission or minimizing energy consumption, but with little evidence of proposals for achieving both objectives in a single model. Using the concept of game theory, we develop a new MAC protocol for IEEE 802.15.4 and IoT networks in which we formulate a novel expression for the players' utility function and establish a stable Nash equilibrium (NE) for the game. The proposed IEEE 802.15.4 MAC protocol is modeled as a smart game in which analytical expressions are derived for channel access probability, data transmission probability, and energy used. These analytical expressions are used in formulating an optimization problem (OP) that maximizes data transmission and minimizes energy consumption by nodes. The analysis and simulation results suggest that the proposed scheme is scalable and achieves better performance in terms of data transmission, energy-efficiency, and longevity, when compared with the default IEEE 802.15.4 access mechanism.Peer reviewe

An Adaptive Algorithm to Optimize the Dynamics of IEEE 802.15.4 Networks

Presentado en ICST 2013IEEE 802.15.4 standard is becoming one of the most popular technologies for the deployment of low rate Wireless Personal Area Networks with strong power constraints. In order to reduce the energy consumption, beacon-enabled networks with long network inactive periods can be employed. However, the duration of these inactivity periods, as some other configuration parameters, are conventionally set to default values and remain fixed during the whole network operation. This implies that if they are misconfigured the network will not adapt to changes in the conditions of the environment, particularly to the most determining one, i.e. the traffic load. This paper proposes a simple procedure for the dynamic adaptation of several key parameters of IEEE 802.15.4 networks. Under this procedure, the 802.15.4 parameters are modified as a function of the existing traffic conditions.Spanish National Project No.TEC2009-13763-C02-01

Implementation of RTOS to the WSN node

Bezdrátové senzorické sieťe zväčša používajú `event-driven` operačné systémy. Táto práca diskutuje výhody nevýhody použitia RTOS v bezdrátových senzorických sieťach. Najvhodnejší RTOS je vybratý a sú podniknuté všetky kroky aby bolo možne demonštrovať schopnosť mikrokontrolérov Gecko od EnergyMicro prevádzkovať tento RTOS s nízkou spotrebou energie a demonštrovať jednoduchú bezdrátovú komunikáciu s Atmel AT86RF212 rádiami.Wireless sensors networks mostly use event-driven OSes. This works discusses pros and cons of using RTOS in wirless sensors networks. A most appropriate RTOS is chosen and all necessary steps are undergone to demonstrate EnergyMicro Gecko MCU's ability to run the RTOS with low energy consumption and demonstrate wireless simple communication with Atmel AT86RF212 radios.

Transmission Delay of Multi-hop Heterogeneous Networks for Medical Applications

Nowadays, with increase in ageing population, Health care market keeps growing. There is a need for monitoring of Health issues. Body Area Network consists of wireless sensors attached on or inside human body for monitoring vital Health related problems e.g, Electro Cardiogram (ECG), ElectroEncephalogram (EEG), ElectronyStagmography(ENG) etc. Data is recorded by sensors and is sent towards Health care center. Due to life threatening situations, timely sending of data is essential. For data to reach Health care center, there must be a proper way of sending data through reliable connection and with minimum delay. In this paper transmission delay of different paths, through which data is sent from sensor to Health care center over heterogeneous multi-hop wireless channel is analyzed. Data of medical related diseases is sent through three different paths. In all three paths, data from sensors first reaches ZigBee, which is the common link in all three paths. After ZigBee there are three available networks, through which data is sent. Wireless Local Area Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX), Universal Mobile Telecommunication System (UMTS) are connected with ZigBee. Each network (WLAN, WiMAX, UMTS) is setup according to environmental conditions, suitability of device and availability of structure for that device. Data from these networks is sent to IP-Cloud, which is further connected to Health care center. Main aim of this paper is to calculate delay of each link in each path over multihop wireless channel.Comment: BioSPAN with 7th IEEE International Conference on Broadband and Wireless Computing, Communication and Applications (BWCCA 2012), Victoria, Canada, 201

Design and analysis of adaptive hierarchical low-power long-range networks

A new phase of evolution of Machine-to-Machine (M2M) communication has started where vertical Internet of Things (IoT) deployments dedicated to a single application domain gradually change to multi-purpose IoT infrastructures that service different applications across multiple industries. New networking technologies are being deployed operating over sub-GHz frequency bands that enable multi-tenant connectivity over long distances and increase network capacity by enforcing low transmission rates to increase network capacity. Such networking technologies allow cloud-based platforms to be connected with large numbers of IoT devices deployed several kilometres from the edges of the network. Despite the rapid uptake of Long-power Wide-area Networks (LPWANs), it remains unclear how to organize the wireless sensor network in a scaleable and adaptive way. This paper introduces a hierarchical communication scheme that utilizes the new capabilities of Long-Range Wireless Sensor Networking technologies by combining them with broadly used 802.11.4-based low-range low-power technologies. The design of the hierarchical scheme is presented in detail along with the technical details on the implementation in real-world hardware platforms. A platform-agnostic software firmware is produced that is evaluated in real-world large-scale testbeds. The performance of the networking scheme is evaluated through a series of experimental scenarios that generate environments with varying channel quality, failing nodes, and mobile nodes. The performance is evaluated in terms of the overall time required to organize the network and setup a hierarchy, the energy consumption and the overall lifetime of the network, as well as the ability to adapt to channel failures. The experimental analysis indicate that the combination of long-range and short-range networking technologies can lead to scalable solutions that can service concurrently multiple applications