Development of novel micropneumatic grippers for biomanipulation

Microbjects with dimensions from 1 μm to 1 mm have been developed recently for different aspects and purposes. Consequently, the development of handling and manipulation tools to fulfil this need is urgently required. Micromanipulation techniques could be generally categorized according to their actuation method such as electrostatic, thermal, shape memory alloy, piezoelectric, magnetic, and fluidic actuation. Each of which has its advantage and disadvantage. The fluidic actuation has been overlooked in MEMS despite its satisfactory output in the micro-scale. This thesis presents different families of pneumatically driven, low cost, compatible with biological environment, scalable, and controllable microgrippers. The first family demonstrated a polymeric microgripper that was laser cut and actuated pneumatically. It was tested to manipulate microparticles down to 200 microns. To overcome the assembly challenges that arise in this family, the second family was proposed. The second family was a micro-cantilever based microgripper, where the device was assembled layer by layer to form a 3D structure. The microcantilevers were fabricated using photo-etching technique, and demonstrated the applicability to manipulate micro-particles down to 200 microns using automated pick-and-place procedure. In addition, this family was used as a tactile-detector as well. Due to the angular gripping scheme followed by the above mentioned families, gripping smaller objects becomes a challenging task. A third family following a parallel gripping scheme was proposed allowing the gripping of smaller objects to be visible. It comprises a compliant structure microgripper actuated pneumatically and fabricated using picosecond laser technology, and demonstrated the capability of gripping microobject as small as 100 μm microbeads. An FEA modelling was employed to validate the experimental and analytical results, and excellent matching was achieved

Design, evaluation, and control of nexus: a multiscale additive manufacturing platform with integrated 3D printing and robotic assembly.

Additive manufacturing (AM) technology is an emerging approach to creating three-dimensional (3D) objects and has seen numerous applications in medical implants, transportation, aerospace, energy, consumer products, etc. Compared with manufacturing by forming and machining, additive manufacturing techniques provide more rapid, economical, efficient, reliable, and complex manufacturing processes. However, additive manufacturing also has limitations on print strength and dimensional tolerance, while traditional additive manufacturing hardware platforms for 3D printing have limited flexibility. In particular, part geometry and materials are limited to most 3D printing hardware. In addition, for multiscale and complex products, samples must be printed, fabricated, and transferred among different additive manufacturing platforms in different locations, which leads to high cost, long process time, and low yield of products. This thesis investigates methods to design, evaluate, and control the NeXus, which is a novel custom robotic platform for multiscale additive manufacturing with integrated 3D printing and robotic assembly. NeXus can be used to prototype miniature devices and systems, such as wearable MEMS sensor fabrics, microrobots for wafer-scale microfactories, tactile robot skins, next generation energy storage (solar cells), nanostructure plasmonic devices, and biosensors. The NeXus has the flexibility to fixture, position, transport, and assemble components across a wide spectrum of length scales (Macro-Meso-Micro-Nano, 1m to 100nm) and provides unparalleled additive process capabilities such as 3D printing through both aerosol jetting and ultrasonic bonding and forming, thin-film photonic sintering, fiber loom weaving, and in-situ Micro-Electro-Mechanical System (MEMS) packaging and interconnect formation. The NeXus system has a footprint of around 4m x 3.5m x 2.4m (X-Y-Z) and includes two industrial robotic arms, precision positioners, multiple manipulation tools, and additive manufacturing processes and packaging capabilities. The design of the NeXus platform adopted the Lean Robotic Micromanufacturing (LRM) design principles and simulation tools to mitigate development risks. The NeXus has more than 50 degrees of freedom (DOF) from different instruments, precise evaluation of the custom robots and positioners is indispensable before employing them in complex and multiscale applications. The integration and control of multi-functional instruments is also a challenge in the NeXus system due to different communication protocols and compatibility. Thus, the NeXus system is controlled by National Instruments (NI) LabVIEW real-time operating system (RTOS) with NI PXI controller and a LabVIEW State Machine User Interface (SMUI) and was programmed considering the synchronization of various instruments and sequencing of additive manufacturing processes for different tasks. The operation sequences of each robot along with relevant tools must be organized in safe mode to avoid crashes and damage to tools during robots’ motions. This thesis also describes two demonstrators that are realized by the NeXus system in detail: skin tactile sensor arrays and electronic textiles. The fabrication process of the skin tactile sensor uses the automated manufacturing line in the NeXus with pattern design, precise calibration, synchronization of an Aerosol Jet printer, and a custom positioner. The fabrication process for electronic textiles is a combination of MEMS fabrication techniques in the cleanroom and the collaboration of multiple NeXus robots including two industrial robotic arms and a custom high-precision positioner for the deterministic alignment process

The static and dynamic response of SU-8 electrothermal microgrippers of varying thickness

This work presents an investigation into the effect on dynamic response of SU-8 microgrippers due to varying thickness, and subsequent validation via COMSOL Multiphysics simulations and thermal camera profiling during actuation. The tweezer-like microgrippers can easily manipulate, with a high degree of control, cells and particles with diameters as small as 10 μm, without using an impractical operating voltage or generating excessive heat. However, in order to fully exploit the versatility of the devices, their response characteristics must be fully understood as material and/or dimension parameters change. Therefore an investigation took place to determine the effects of device thickness on functionality of the device, including the drive current required to actuate the gripper and the speed of actuation. Furthermore, an infrared camera was used to characterise the thermal response of the device. Finally, a simulation of the temperature profile and deflection dimension has been developed in order to verify the findings and further investigate and predict the effects of design variations

Microgripper design and evaluation for automated µ-wire assembly: a survey

Microgrippers are commonly used for micromanipulation of micro-objects from 1 to 100 µm and attain features of reliable accuracy, low cost, wide jaw aperture and variable applied force. This paper aim is to review the design of different microgrippers which can manipulate and assemble µ-wire to PCB connectors. A review was conducted on microgrippers’ technologies, comparing fundamental components of structure and actuators’ types, which determined the most suitable design for the required micromanipulation task. Various microgrippers’ design was explored to examine the suitability and the execution of requirements needed for successful micromanipulation

Workshop on "Robotic assembly of 3D MEMS".

Proceedings of a workshop proposed in IEEE IROS'2007.The increase of MEMS' functionalities often requires the integration of various technologies used for mechanical, optical and electronic subsystems in order to achieve a unique system. These different technologies have usually process incompatibilities and the whole microsystem can not be obtained monolithically and then requires microassembly steps. Microassembly of MEMS based on micrometric components is one of the most promising approaches to achieve high-performance MEMS. Moreover, microassembly also permits to develop suitable MEMS packaging as well as 3D components although microfabrication technologies are usually able to create 2D and "2.5D" components. The study of microassembly methods is consequently a high stake for MEMS technologies growth. Two approaches are currently developped for microassembly: self-assembly and robotic microassembly. In the first one, the assembly is highly parallel but the efficiency and the flexibility still stay low. The robotic approach has the potential to reach precise and reliable assembly with high flexibility. The proposed workshop focuses on this second approach and will take a bearing of the corresponding microrobotic issues. Beyond the microfabrication technologies, performing MEMS microassembly requires, micromanipulation strategies, microworld dynamics and attachment technologies. The design and the fabrication of the microrobot end-effectors as well as the assembled micro-parts require the use of microfabrication technologies. Moreover new micromanipulation strategies are necessary to handle and position micro-parts with sufficiently high accuracy during assembly. The dynamic behaviour of micrometric objects has also to be studied and controlled. Finally, after positioning the micro-part, attachment technologies are necessary

Rapid Polymer Prototyping for Low Cost and Robust Microrobots

The Rapid Microrobot Prototyping (RaMP) Process uses Loctite(R) photo-patternable polymer products and photolithography to rapidly fabricate robust, inexpensive, and compliant robots. The process is developed and examined on two size scales. On the size scale of several centimeters, two functional robots and a small gripper have been designed and demonstrated with shape memory alloy (SMA) used for actuation. The gripper is 1.2g and costs $3.21 while the inchworm robot is 7.4g and costs$7.76 in small numbers. The second robot costs $14.93 in small numbers. On the sub-centimeter scale, designs and considerations for a walking microrobot fabricated with the process and its control are fully described. The design and kinematics of a thermally actuated, one degree of freedom leg for the microrobot are developed and simulated. Several of these units could be combined to rapidly build a 30 mg functional and simple walking microrobot with the ability to lift several grams

A microgripper for single cell manipulation

This thesis presents the development of an electrothermally actuated microgripper for the manipulation of cells and other biological particles. The microgripper has been fabricated using a combination of surface and bulk micromachining techniques in a three mask process. All of the fabrication details have been chosen to enable a tri-layer, polymer (SU8) - metal (Au) - polymer (SU8), membrane to be released from the substrate stress free and without the need for sacrificial layers. An actuator design, which completely eliminates the parasitic resistance of the cold arm, is presented. When compared to standard U-shaped actuators, it improves the thermal efficiency threefold. This enables larger displacements at lower voltages and temperatures. The microgripper is demonstrated in three different configurations: normally open mode, normally closed mode, and normally open/closed mode. It has-been modelled using two coupled analytical models - electrothermal and thermomechanical - which have been custom developed for this application. Unlike previously reported models, the electrothermal model presented here includes the heat exchange between hot and cold arms of the actuators that are separated by a small air gap. A detailed electrothermomechanical characterisation of selected devices has permitted the validation of the models (also performed using finite element analysis) and the assessment of device performance. The device testing includes electrical, deflection, and temperature measurements using infrared (IR) thermography, its use in polymeric actuators reported here for the first time. Successful manipulation experiments have been conducted in both air and liquid environments. Manipulation of live cells (mice oocytes) in a standard biomanipulation station has validated the microgripper as a complementary and unique tool for the single cell experiments that are to be conducted by future generations of biologists in the areas of human reproduction and stem cell research

Manipulation of micro-components using vacuum grippers.

SUMMARY. During the past decades several microproducts have been fabricated for a great variety of applications in the traditional fields, including the medical and biomedical sectors, automotive, aeronautics and aerospace, Information Technology and telecommunication as well as in more innovative areas, such as household appliances, entertainment and sport equipment. Nevertheless, hybrid three dimensional micro products have still great difficulty in penetrating the market, mainly due to the limits of the fabrication processes that require manipulation and final assembly of microcomponents. These processes, being not yet automated, strongly affect the cost of products. Therefore, new market perspectives can be reached automating the assembly phase. The main challenge is due to the new physical scenario that appears when dealing with the assembly of millimetric and sub-millimetric parts. Indeed, at the microscale the high surface to volume ratio leads to the predominance of the superficial forces (e.g. electrostatic, van der Waals and surface tension forces) over the gravitational force; this results in an unpredictable behaviour of the traditional manipulating mechanisms, whereas an efficient and precise control of the grasp and release of thousands of microscopic and fragile parts is required. For this reason the downscaling of traditional handling strategies and the development of new handling techniques require further studies. Several solutions can be found in literature, with their advantages and limitations, i.e.: friction and jaw microgrippers, magnetic and electrical fields used to levitate objects, adhesive grippers exploiting capillary force. Also vacuum grippers can be miniaturized. Due to their intrinsic simplicity, vacuum grippers are very cheap and appear a promising solution for industrial applications, if some improvements are carried out. In this context, an experimental setup for the automatic manipulation of microcomponents through some vacuum grippers was developed. Moreover, an innovative design of a nozzle for a vacuum gripper was fabricated and tested, comparing its performance with traditional needles. The design was conceived in order to reduce the frequency of occlusions of the nozzle and handle a wide range of particles. The tests described in this paper concern mainly the success and the precision of the release of objects from the gripper. Indeed, this is one the crucial aspect of micromanipulation because microparts tend to stick to the gripper preventing the successful performance of manipulation tasks

Design and control of a multi-axis micro-electro-mechanical system array for coordinated micro-manipulation

Micro-electro-mechanical system design and implementation is a field that has received much attention over the past few decades. These robotic systems with features on the micro-scale have an unparalleled opportunity to change the way scientists interact with and understand micro and nano-scale phenomenon. Their capabilities allow experimentation that cannot be achieved with standard macro-scale equipment. Potential applications range from observing biological processes in living cells, to smart materials that automatically detect microcracks. So far, however, only a few truly successful applications have been realized. One of the most elusive goals in MEMS design is creating a system capable of coordinated motion tasks. This task requires an innovative approach to mechanism design and control. In this work a novel micro-positioning stage is presented that is intended to be implemented in a very large scale array. The stages are actuated by custom optimized electro-thermal-compliant micro-actuators intended for high force applications. These actuators, in combination with mechanical amplification, enable a high degree of mobility which allows a large work area. Furthermore the stage itself has a small foot print to allow a high density of actuators to interact in the common workspace. Control of the stages is realized using vision feedback with Kalman Filtering for high-speed intersample estimation. An iterative learning controller is then used for high precision tracking. This approach gives a high degree of accuracy that is nearly as good as the resolution of the measurement system, and at frequencies that approach the bandwidth of the system --Abstract, page iii