MTJ-BASED HYBRID STORAGE CELLS FOR “NORMALLY-OFF AND INSTANT-ON” COMPUTING

Besides increasing a computing throughput, multi-core processor architectures bring increased capacity of SRAM-based cache memory. As a result, cache memory now occupies large proportion of recent processor chips, becoming a major source of the leakage power consumption. The power gating technique applied on a SRAM cache is not efficient since it is paid by data loss. In this paper, we present two hybrid memory cells that combine a conventional volatile CMOS part with Magnetic Tunnel Junctions (MTJs) able to store a data bit in a non-volatile way. Being inherently non-volatile, these hybrid cells enable instantaneous power off and thus complete reduction of the leakage power. Moreover, given that the data bit can be stored in local MTJs and not in distant storage memories, these cells also offer instantaneous and efficient data retrieval. To demonstrate their functionality, the cells are designed using 28 nm FD-SOI technology for the CMOS part and 45 nm round spin transfer torque MTJs (STT-MTJs) with perpendicular magnetization anisotropy. We report the measured performances of the cells in terms of required silicon area, robustness, read/write speed and energy consumption

Conception innovante et développement d'outils de conception d'ASIC pour Technologie Hybride CMOS / Magnétique

Depuis plusieurs années de nombreuses technologies non volatiles sont apparues et ont pris place principalement dans le monde de la mémoire, tendant à remplacer tout type de mémoire. Leurs atouts laissent à penser que certaines d'entre elles, et en particulier les technologies MRAM, pourraient améliorer les performances des circuits intégrés en utilisant leurs composants magnétiques, si connus notamment sous le nom de jonctions tunnel magnétiques, dans la logique. Pour évaluer ces éventuels gains, il faut être capable de concevoir de tels circuits. C'est pourquoi nous proposons dans ces travaux d'une part un kit de conception complet pour les flots de conception full custom et numérique, permettant de couvrir l'ensemble des étapes de conception pour chacun d'entre eux. Une partie de ce kit a servi à plusieurs partenaires de projets de recherche ANR, pour concevoir des démonstrateurs. Nous proposons également dans ce kit de conception un latch magnétique non volatil innovant ultra compact, pour lequel deux brevets d'invention ont été déposés, intégré à une flip-flop. Enfin, nous présentons l'intégration de composants magnétiques à deux applications, sécurité et faible consommation, ainsi qu'une étude qui montre que les gains en consommation statique peuvent être considérables.For several years many non-volatile technologies have been appearing and taking place mainly in the memory world, aiming at replacing all kind of memory. Their assets let thinking that some of them, specially the MRAM technologies, could improve the integrated circuit performances, using their so called magnetic components in the logic, in particular the magnetic tunnel junctions. To evaluate the potential benefits, it is necessary to be able to design such a circuit. That is the reason why we are proposing a full design kit for both full custom and digital designs, allowing all the design steps. Part of this kit has been used by partners in research project to design demonstrators. We also propose in this kit an innovative ultra-compact magnetic latch, for which 2 patents have been deposited, integrated in a flip-flop. Finally, we present the integration of magnetic components for two applications, security and low power, as well as a case study which shows that the static consumption reduction can be huge.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Impacto de falhas transientes em memórias SRAM em nanotecnologia

Esse trabalho avalia o impacto de falhas transientes induzidos por radiação em cinco topologias de células SRAM: 6T, 8T, 9T, 8T-SER e DICE. A análise explora as características temporais, de dissipação de potência e o limiar de LET durante a operação de armazenamento. As células de memória foram descritas utilizando o modelo preditivo na tecnologia de 16nm. Os resultados mostram o melhor desempenho da célula DICE como a opção mais robusta quanto aos efeitos de radiação. A célula 8T-SER obteve a melhor estabilidade considerando a tolerância ao ruído. Também são apresentados os ganhos na utilização da célula 8T em relação a 6T quando consideradas as métricas de atraso e consumo energético

Modeling and Mitigation of Soft Errors in Nanoscale SRAMs

Energetic particle (alpha particle, cosmic neutron, etc.) induced single event data upset or soft error has emerged as a key reliability concern in SRAMs in sub-100 nanometre technologies. Low operating voltage, small node capacitance, high packing density, and lack of error masking mechanisms are primarily responsible for the soft error susceptibility of SRAMs. In addition, since SRAM occupies the majority of die area in system-on-chips (SoCs) and microprocessors, different leakage reduction techniques, such as, supply voltage reduction, gated grounding, etc., are applied to SRAMs in order to limit the overall chip leakage. These leakage reduction techniques exponentially increase the soft error rate in SRAMs. The soft error rate is further accentuated by process variations, which are prominent in scaled-down technologies. In this research, we address these concerns and propose techniques to characterize and mitigate soft errors in nanoscale SRAMs. We develop a comprehensive analytical model of the critical charge, which is a key to assessing the soft error susceptibility of SRAMs. The model is based on the dynamic behaviour of the cell and a simple decoupling technique for the non-linearly coupled storage nodes. The model describes the critical charge in terms of NMOS and PMOS transistor parameters, cell supply voltage, and noise current parameters. Consequently, it enables characterizing the spread of critical charge due to process induced variations in these parameters and to manufacturing defects, such as, resistive contacts or vias. In addition, the model can estimate the improvement in critical charge when MIM capacitors are added to the cell in order to improve the soft error robustness. The model is validated by SPICE simulations (90nm CMOS) and radiation test. The critical charge calculated by the model is in good agreement with SPICE simulations with a maximum discrepancy of less than 5%. The soft error rate estimated by the model for low voltage (sub 0.8 V) operations is within 10% of the soft error rate measured in the radiation test. Therefore, the model can serve as a reliable alternative to time consuming SPICE simulations for optimizing the critical charge and hence the soft error rate at the design stage. In order to limit the soft error rate further, we propose an area-efficient multiword based error correction code (MECC) scheme. The MECC scheme combines four 32 bit data words to form a composite 128 bit ECC word and uses an optimized 4-input transmission-gate XOR logic. Thus MECC significantly reduces the area overhead for check-bit storage and the delay penalty for error correction. In addition, MECC interleaves two composite words in a row for limiting cosmic neutron induced multi-bit errors. The ground potentials of the composite words are controlled to minimize leakage power without compromising the read data stability. However, use of composite words involves a unique write operation where one data word is written while other three data words are read to update the check-bits. A power efficient word line signaling technique is developed to facilitate the write operation. A 64 kb SRAM macro with MECC is designed and fabricated in a commercial 90nm CMOS technology. Measurement results show that the SRAM consumes 534 μW at 100 MHz with a data latency of 3.3 ns for a single bit error correction. This translates into 82% per-bit energy saving and 8x speed improvement over recently reported multiword ECC schemes. Accelerated neutron radiation test carried out at TRIUMF in Vancouver confirms that the proposed MECC scheme can correct up to 85% of soft errors

Design and analysis of SRAMs for energy harvesting systems

PhD ThesisAt present, the battery is employed as a power source for wide varieties of microelectronic systems ranging from biomedical implants and sensor net-works to portable devices. However, the battery has several limitations and incurs many challenges for the majority of these systems. For instance, the design considerations of implantable devices concern about the battery from two aspects, the toxic materials it contains and its lifetime since replacing the battery means a surgical operation. Another challenge appears in wire-less sensor networks, where hundreds or thousands of nodes are scattered around the monitored environment and the battery of each node should be maintained and replaced regularly, nonetheless, the batteries in these nodes do not all run out at the same time. Since the introduction of portable systems, the area of low power designs has witnessed extensive research, driven by the industrial needs, towards the aim of extending the lives of batteries. Coincidentally, the continuing innovations in the field of micro-generators made their outputs in the same range of several portable applications. This overlap creates a clear oppor-tunity to develop new generations of electronic systems that can be powered, or at least augmented, by energy harvesters. Such self-powered systems benefit applications where maintaining and replacing batteries are impossi-ble, inconvenient, costly, or hazardous, in addition to decreasing the adverse effects the battery has on the environment. The main goal of this research study is to investigate energy harvesting aware design techniques for computational logic in order to enable the capa- II bility of working under non-deterministic energy sources. As a case study, the research concentrates on a vital part of all computational loads, SRAM, which occupies more than 90% of the chip area according to the ITRS re-ports. Essentially, this research conducted experiments to find out the design met-ric of an SRAM that is the most vulnerable to unpredictable energy sources, which has been confirmed to be the timing. Accordingly, the study proposed a truly self-timed SRAM that is realized based on complete handshaking protocols in the 6T bit-cell regulated by a fully Speed Independent (SI) tim-ing circuitry. The study proved the functionality of the proposed design in real silicon. Finally, the project enhanced other performance metrics of the self-timed SRAM concentrating on the bit-line length and the minimum operational voltage by employing several additional design techniques.Umm Al-Qura University, the Ministry of Higher Education in the Kingdom of Saudi Arabia, and the Saudi Cultural Burea

Low energy digital circuit design using sub-threshold operation

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, February 2006.Includes bibliographical references (p. 189-202).Scaling of process technologies to deep sub-micron dimensions has made power management a significant concern for circuit designers. For emerging low power applications such as distributed micro-sensor networks or medical applications, low energy operation is the primary concern instead of speed, with the eventual goal of harvesting energy from the environment. Sub-threshold operation offers a promising solution for ultra-low-energy applications because it often achieves the minimum energy per operation. While initial explorations into sub-threshold circuits demonstrate its promise, sub-threshold circuit design remains in its infancy. This thesis makes several contributions that make sub-threshold design more accessible to circuit designers. First, a model for energy consumption in sub-threshold provides an analytical solution for the optimum VDD to minimize energy. Fitting this model to a generic circuit allows easy estimation of the impact of processing and environmental parameters on the minimum energy point. Second, analysis of device sizing for sub-threshold circuits shows the trade-offs between sizing for minimum energy and for minimum voltage operation.(cont.) A programmable FIR filter test chip fabricated in 0.18pum bulk CMOS provides measurements to confirm the model and the sizing analysis. Third, a low-overhead method for integrating sub-threshold operation with high performance applications extends dynamic voltage scaling across orders of magnitude of frequency and provides energy scalability down to the minimum energy point. A 90nm bulk CMOS test chip confirms the range of operation for ultra-dynamic voltage scaling. Finally, sub-threshold operation is extended to memories. Analysis of traditional SRAM bitcells and architectures leads to development of a new bitcell for robust sub-threshold SRAM operation. The sub-threshold SRAM is analyzed experimentally in a 65nm bulk CMOS test chip.by Benton H. Calhoun.Ph.D

Design and Analysis of Low-power SRAMs

The explosive growth of battery operated devices has made low-power design a priority in recent years. Moreover, embedded SRAM units have become an important block in modern SoCs. The increasing number of transistor count in the SRAM units and the surging leakage current of the MOS transistors in the scaled technologies have made the SRAM unit a power hungry block from both dynamic and static perspectives. Owing to high bitline voltage swing during write operation, the write power consumption is dominated the dynamic power consumption. The static power consumption is mainly due to the leakage current associated with the SRAM cells distributed in the array. Moreover, as supply voltage decreases to tackle the power consumption, the data stability of the SRAM cells have become a major concern in recent years. To reduce the write power consumption, several schemes such as row based sense amplifying cell (SAC) and hierarchical bitline sense amplification (HBLSA) have been proposed. However, these schemes impose architectural limitations on the design in terms of the number of words on a row. Beside, the effectiveness of these methods is limited to the dynamic power consumption. Conventionally, reduction of the cell supply voltage and exploiting the body effect has been suggested to reduce the cell leakage current. However, variation of the supply voltage of the cell associates with a higher dynamic power consumption and reduced cell data stability. Conventionally qualified by Static Noise Margin (SNM), the ability of the cell to retain the data is reduced under a lower supply voltage conditions. In this thesis, we revisit the concept of data stability from the dynamic perspective. A new criteria for the data stability of the SRAM cell is defined. The new criteria suggests that the access time and non-access time (recovery time) of the cell can influence the data stability in a SRAM cell. The speed vs. stability trade-off opens new opportunities for aggressive power reduction for low-power applications. Experimental results of a test chip implemented in a 130 nm CMOS technology confirmed the concept and opened a ground for introduction of a new operational mode for the SRAM cells. We introduced a new architecture; Segmented Virtual Grounding (SVGND) to reduce the dynamic and static power reduction in SRAM units at the same time. Thanks to the new concept for the data stability in SRAM cells, we introduced the new operational mode of Accessed Retention Mode (AR-Mode) to the SRAM cell. In this mode, the accessed SRAM cell can retain the data, however, it does not discharge the bitline. The new architecture outperforms the recently reported low-power schemes in terms of dynamic power consumption, thanks to the exclusive discharge of the bitline and the cell virtual ground. In addition, the architecture reduces the leakage current significantly since it uses the back body biasing in both load and drive transistors. A 40Kb SRAM unit based on SVGND architecture is implemented in a 130 nm CMOS technology. Experimental results exhibit a remarkable static and dynamic power reduction compared to the conventional and previously reported low-power schemes as expect from the simulation results

TERPS: The Embedded Reliable Processing System

Electromagnetic Interference (EMI) can have an adverse effect on commercial electronics. As feature sizes of integrated circuits become smaller, their susceptibility to EMI increases. In light of this, integrated circuits will face substantial problems in the future either from electromagnetic disturbances or intentionally generated EMI from a malicious source. The Embedded Reliable Processing System (TERPS) is a fault tolerant system architecture which can significantly reduce the threat of EMI in computer systems. TERPS employs a checkpoint and rollback recovery mechanism tied with a multi-phase commit protocol and 3D IC technology. This enables it to recover from substantial EMI without having to shutdown or reboot. In the face of such EMI, only a loss in performance dictated by the strength and duration of the interference and the frequency of checkpointing will be seen. Various conditions in which chips can fail under the influence of EMI are described. The checkpoint and rollback recovery mechanism and the resulting TERPS architecture is stipulated. A thorough evaluation of the design correctness is provided. The technique is implemented in Verilog HDL using a 16-bit, 5-stage pipelined processor to show proof of concept. The performance overhead is calculated for different checkpointing intervals and is shown to be very reasonable (5-6% for checkpointing every 128 CPU cycles)