Emerging Run-Time Reconfigurable FPGA and CAD Tools

Field-programmable gate array (FPGA) is a post fabrication reconfigurable device to accelerate domain specific computing systems. It offers offer high operation speed and low power consumption. However, the design flexibility and performance of FPGAs are severely constrained by the costly on-chip memories, e.g. static random access memory (SRAM) and FLASH memory. The objective of my dissertation is to explore the opportunity and enable the use of the emerging resistance random access memory (ReRAM) in FPGA design. The emerging ReRAM technology features high storage density, low access power consumption, and CMOS compatibility, making it a promising candidate for FPGA implementation. In particular, ReRAM has advantages of the fast access and nonvolatility, enabling the on-chip storage and access of configuration data. In this dissertation, I first propose a novel three-dimensional stacking scheme, namely, high-density interleaved memory (HIM). The structure improves the density of ReRAM meanwhile effectively reducing the signal interference induced by sneak paths in crossbar arrays. To further enhance the access speed and design reliability, a fast sensing circuit is also presented which includes a new sense amplifier scheme and reference cell configuration. The proposed ReRAM FPGA leverages a similar architecture as conventional SRAM based FPGAs but utilizes ReRAM technology in all component designs. First, HIM is used to implement look-up table (LUT) and block random access memories (BRAMs) for func- tionality process. Second, a 2R1T, two ReRAM cells and one transistor, nonvolatile switch design is applied to construct connection blocks (CBs) and switch blocks (SBs) for signal transition. Furthermore, unified BRAM (uBRAM) based on the current BRAM architecture iv is introduced, offering both configuration and temporary data storage. The uBRAMs provides extremely high density effectively and enlarges the FPGA capacity, potentially saving multiple contexts of configuration. The fast configuration scheme from uBRAM to logic and routing components also makes fast run-time partial reconfiguration (PR) much easier, improving the flexibility and performance of the entire FPGA system. Finally, modern place and route tools are designed for homogeneous fabric of FPGA. The PR feature, however, requires the support of heterogeneous logic modules in order to differentiate PR modules from static ones and therefore maintain the signal integration. The existing approaches still reply on designers’ manual effort, which significantly prolongs design time and lowers design efficiency. In this dissertation, I integrate PR support into VPR – an academic place and route tool by introducing a B*-tree modular placer (BMP) and PR-aware router. As such, users are able to explore new architectures or map PR applications to a variety of FPGAs. More importantly, this enhanced feature can also support fast design automation, e.g. mapping IP core, loading pre-synthesizing logic modules, etc

Letter from the Special Issue Editor

Editorial work for DEBULL on a special issue on data management on Storage Class Memory (SCM) technologies

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Application Centric Networks-On-Chip Design Solutions for Future Multicore Systems

With advances in technology, future multicore systems scaled to 100s and 1000s of cores/accelerators are being touted as an effective solution for extracting huge performance gains using parallel programming paradigms. However with the failure of Dennard Scaling all the components on the chip cannot be run simultaneously without breaking the power and thermal constraints leading to strict chip power envelops. The scaling up of the number of on chip components has also brought upon Networks-On-Chip (NoC) based interconnect designs like 2D mesh. The contribution of NoC to the total on chip power and overall performance has been increasing steadily and hence high performance power-efficient NoC designs are becoming crucial. Future multicore paradigms can be broadly classified, based on the applications they are tailored to, into traditional Chip Multi processor(CMP) based application based systems, characterized by low core and NoC utilization, and emerging big data application based systems, characterized by large amounts of data movement necessitating high throughput requirements. To this order, we propose NoC design solutions for power-savings in future CMPs tailored to traditional applications and higher effective throughput gains in multicore systems tailored to bandwidth intensive applications. First, we propose Fly-over, a light-weight distributed mechanism for power-gating routers attached to switched off cores to reduce NoC power consumption in low load CMP environment. Secondly, we plan on utilizing a promising next generation memory technology, Spin-Transfer Torque Magnetic RAM(STT-MRAM), to achieve enhanced NoC performance to satisfy the high throughput demands in emerging bandwidth intensive applications, while reducing the power consumption simultaneously. Thirdly, we present a hardware data approximation framework for NoCs, APPROX-NoC, with an online data error control mechanism, which can leverage the approximate computing paradigm in the emerging data intensive big data applications to attain higher performance per watt

Electric field control of fixed magnetic Skyrmions for energy efficient nanomagnetic memory

To meet the ever-growing demand of faster and smaller computers, increasing number of transistors are needed in the same chip area. Unfortunately, Silicon based transistors have almost reached their miniaturization limits mainly due to excessive heat generation. Nanomagnetic devices are one of the most promising alternatives of CMOS. In nanomagnetic devices, electron spin, instead of charge, is the information carrier. Hence, these devices are non-volatile: information can be stored in these devices without needing any external power which could enable computing architectures beyond traditional von-Neumann computing. Additionally, these devices are also expected to be more energy efficient than CMOS devices as their operation does not involve translation of charge across the device. However, the energy dissipated in the clocking circuitry negates this perceived advantage and in practice CMOS devices still consume three orders of magnitudes less energy. Therefore, researchers have been looking for nanomagnetic devices that could be energy efficient in addition to being non-volatile which has led to the exploration of several switching strategies. Among those, electric field induced switching has proved to be a promising route towards scalable ultra-low power computing devices. Particularly Voltage Control of Magnetic Anisotropy (VCMA) based switching dissipates ~1 fJ energy. However, incoherence due to thermal noise and material inhomogeneity renders this switching error-prone. This dissertation is devoted towards studying VCMA induced switching of a spin spiral magnetic state, magnetic skyrmions, which can potentially alleviate this issue. Magnetic skyrmions has recently emerged as a viable candidate to be used in room temperature nanomagnetic devices. Most of the studies propose to utilize skyrmion motion in a magnetic track to implement memory devices. However, Magnetic Tunnel Junction (MTJ) devices based on skyrmions that are fixed in space might be advantageous in terms of footprint. To establish a new computing paradigm based on electrical manipulation of magnetization of fixed magnetic skyrmions we have studied: i) Purely VCMA induced reversal of magnetic skyrmions using extensive micromagnetic simulations. This shows sequential increase and decrease of Perpendicular Magnetic Anisotropy (PMA) can result into toggling between skyrmionic and ferromagnetic states. We also demonstrate VCMA assisted Spin Transfer Torque (STT) induced reversal of magnetic skyrmions. ii) Complete reversal of ferromagnets mediated by intermediated skyrmion state using rigorous micromagnetic simulation. We show that the switching can be robust by limiting the “phase space” of the magnetization dynamics through a controlled skyrmion state. Thus, the switching error can be lowered compared to conventional VCMA switching. iii) Finally, we perform preliminary experiments on VCMA induced manipulation of skyrmions. We demonstrate that skyrmions can be annihilated when Perpendicular Magnetic Anisotropy of the system is increased by applying a negative voltage pulse and can be recreated by decreasing PMA by applying a positive voltage pulse. The experimental observations are corroborated using micromagnetic simulation. Future research should focus on demonstrating reversal of skyrmions experimentally in MTJ like devices and study the downscaling of the proposed device. These can enable realization of energy efficient and robust nanomagnetic memory devices based on voltage control switching of fixed magnetic skyrmions as wells as other neuromorphic computing devices

새로운 메모리 기술을 기반으로 한 메모리 시스템 설계 기술

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2017. 2. 최기영.Performance and energy efficiency of modern computer systems are largely dominated by the memory system. This memory bottleneck has been exacerbated in the past few years with (1) architectural innovations for improving the efficiency of computation units (e.g., chip multiprocessors), which shift the major cause of inefficiency from processors to memory, and (2) the emergence of data-intensive applications, which demands a large capacity of main memory and an excessive amount of memory bandwidth to efficiently handle such workloads. In order to address this memory wall challenge, this dissertation aims at exploring the potential of emerging memory technologies and designing a high-performance, energy-efficient memory hierarchy that is aware of and leverages the characteristics of such new memory technologies. The first part of this dissertation focuses on energy-efficient on-chip cache design based on a new non-volatile memory technology called Spin-Transfer Torque RAM (STT-RAM). When STT-RAM is used to build on-chip caches, it provides several advantages over conventional charge-based memory (e.g., SRAM or eDRAM), such as non-volatility, lower static power, and higher density. However, simply replacing SRAM caches with STT-RAM rather increases the energy consumption because write operations of STT-RAM are slower and more energy-consuming than those of SRAM. To address this challenge, we propose four novel architectural techniques that can alleviate the impact of inefficient STT-RAM write operations on system performance and energy consumption. First, we apply STT-RAM to instruction caches (where write operations are relatively infrequent) and devise a power-gating mechanism called LASIC, which leverages the non-volatility of STT-RAM to turn off STT-RAM instruction caches inside small loops. Second, we propose lower-bits cache, which exploits the narrow bit-width characteristics of application data by caching frequent bit-flips at lower bits in a small SRAM cache. Third, we present prediction hybrid cache, an SRAM/STT-RAM hybrid cache whose block placement between SRAM and STT-RAM is determined by predicting the write intensity of each cache block with a new hardware structure called write intensity predictor. Fourth, we propose DASCA, which predicts write operations that can bypass the cache without incurring extra cache misses (called dead writes) and lets the last-level cache bypass such dead writes to reduce write energy consumption. The second part of this dissertation architects intelligent main memory and its host architecture support based on logic-enabled DRAM. Traditionally, main memory has served the sole purpose of storing data because the extra manufacturing cost of implementing rich functionality (e.g., computation) on a DRAM die was unacceptably high. However, the advent of 3D die stacking now provides a practical, cost-effective way to integrate complex logic circuits into main memory, thereby opening up the possibilities for intelligent main memory. For example, it can be utilized to implement advanced memory management features (e.g., scheduling, power management, etc.) inside memoryit can be also used to offload computation to main memory, which allows us to overcome the memory bandwidth bottleneck caused by narrow off-chip channels (commonly known as processing-in-memory or PIM). The remaining questions are what to implement inside main memory and how to integrate and expose such new features to existing systems. In order to answer these questions, we propose four system designs that utilize logic-enabled DRAM to improve system performance and energy efficiency. First, we utilize the existing logic layer of a Hybrid Memory Cube (a commercial logic-enabled DRAM product) to (1) dynamically turn off some of its off-chip links by monitoring the actual bandwidth demand and (2) integrate prefetch buffer into main memory to perform aggressive prefetching without consuming off-chip link bandwidth. Second, we propose a scalable accelerator for large-scale graph processing called Tesseract, in which graph processing computation is offloaded to specialized processors inside main memory in order to achieve memory-capacity-proportional performance. Third, we design a low-overhead PIM architecture for near-term adoption called PIM-enabled instructions, where PIM operations are interfaced as cache-coherent, virtually-addressed host processor instructions that can be executed either by the host processor or in main memory depending on the data locality. Fourth, we propose an energy-efficient PIM system called aggregation-in-memory, which can adaptively execute PIM operations at any level of the memory hierarchy and provides a fully automated compiler toolchain that transforms existing applications to use PIM operations without programmer intervention.Chapter 1 Introduction 1 1.1 Inefficiencies in the Current Memory Systems 2 1.1.1 On-Chip Caches 2 1.1.2 Main Memory 2 1.2 New Memory Technologies: Opportunities and Challenges 3 1.2.1 Energy-Efficient On-Chip Caches based on STT-RAM 3 1.2.2 Intelligent Main Memory based on Logic-Enabled DRAM 6 1.3 Dissertation Overview 9 Chapter 2 Previous Work 11 2.1 Energy-Efficient On-Chip Caches based on STT-RAM 11 2.1.1 Hybrid Caches 11 2.1.2 Volatile STT-RAM 13 2.1.3 Redundant Write Elimination 14 2.2 Intelligent Main Memory based on Logic-Enabled DRAM 15 2.2.1 PIM Architectures in the 1990s 15 2.2.2 Modern PIM Architectures based on 3D Stacking 15 2.2.3 Modern PIM Architectures on Memory Dies 17 Chapter 3 Loop-Aware Sleepy Instruction Cache 19 3.1 Architecture 20 3.1.1 Loop Cache 21 3.1.2 Loop-Aware Sleep Controller 22 3.2 Evaluation and Discussion 24 3.2.1 Simulation Environment 24 3.2.2 Energy 25 3.2.3 Performance 27 3.2.4 Sensitivity Analysis 27 3.3 Summary 28 Chapter 4 Lower-Bits Cache 29 4.1 Architecture 29 4.2 Experiments 32 4.2.1 Simulator and Cache Model 32 4.2.2 Results 33 4.3 Summary 34 Chapter 5 Prediction Hybrid Cache 35 5.1 Problem and Motivation 37 5.1.1 Problem Definition 37 5.1.2 Motivation 37 5.2 Write Intensity Predictor 38 5.2.1 Keeping Track of Trigger Instructions 39 5.2.2 Identifying Hot Trigger Instructions 40 5.2.3 Dynamic Set Sampling 41 5.2.4 Summary 42 5.3 Prediction Hybrid Cache 43 5.3.1 Need for Write Intensity Prediction 43 5.3.2 Organization 43 5.3.3 Operations 44 5.3.4 Dynamic Threshold Adjustment 45 5.4 Evaluation Methodology 48 5.4.1 Simulator Configuration 48 5.4.2 Workloads 50 5.5 Single-Core Evaluations 51 5.5.1 Energy Consumption and Speedup 51 5.5.2 Energy Breakdown 53 5.5.3 Coverage and Accuracy 54 5.5.4 Sensitivity to Write Intensity Threshold 55 5.5.5 Impact of Dynamic Set Sampling 55 5.5.6 Results for Non-Write-Intensive Workloads 56 5.6 Multicore Evaluations 57 5.7 Summary 59 Chapter 6 Dead Write Prediction Assisted STT-RAM Cache 61 6.1 Motivation 62 6.1.1 Energy Impact of Inefficient Write Operations 62 6.1.2 Limitations of Existing Approaches 63 6.1.3 Potential of Dead Writes 64 6.2 Dead Write Classification 65 6.2.1 Dead-on-Arrival Fills 65 6.2.2 Dead-Value Fills 66 6.2.3 Closing Writes 66 6.2.4 Decomposition 67 6.3 Dead Write Prediction Assisted STT-RAM Cache Architecture 68 6.3.1 Dead Write Prediction 68 6.3.2 Bidirectional Bypass 71 6.4 Evaluation Methodology 72 6.4.1 Simulation Configuration 72 6.4.2 Workloads 74 6.5 Evaluation for Single-Core Systems 75 6.5.1 Energy Consumption and Speedup 75 6.5.2 Coverage and Accuracy 78 6.5.3 Sensitivity to Signature 78 6.5.4 Sensitivity to Update Policy 80 6.5.5 Implications of Device-/Circuit-Level Techniques for Write Energy Reduction 80 6.5.6 Impact of Prefetching 80 6.6 Evaluation for Multi-Core Systems 81 6.6.1 Energy Consumption and Speedup 81 6.6.2 Application to Inclusive Caches 83 6.6.3 Application to Three-Level Cache Hierarchy 84 6.7 Summary 85 Chapter 7 Link Power Management for Hybrid Memory Cubes 87 7.1 Background and Motivation 88 7.1.1 Hybrid Memory Cube 88 7.1.2 Motivation 89 7.2 HMC Link Power Management 91 7.2.1 Link Delay Monitor 91 7.2.2 Power State Transition 94 7.2.3 Overhead 95 7.3 Two-Level Prefetching 95 7.4 Application to Multi-HMC Systems 97 7.5 Experiments 98 7.5.1 Methodology 98 7.5.2 Link Energy Consumption and Speedup 100 7.5.3 HMC Energy Consumption 102 7.5.4 Runtime Behavior of LPM 102 7.5.5 Sensitivity to Slowdown Threshold 104 7.5.6 LPM without Prefetching 104 7.5.7 Impact of Prefetching on Link Traffic 105 7.5.8 On-Chip Prefetcher Aggressiveness in 2LP 107 7.5.9 Tighter Off-Chip Bandwidth Margin 107 7.5.10 Multithreaded Workloads 108 7.5.11 Multi-HMC Systems 109 7.6 Summary 111 Chapter 8 Tesseract PIM System for Parallel Graph Processing 113 8.1 Background and Motivation 115 8.1.1 Large-Scale Graph Processing 115 8.1.2 Graph Processing on Conventional Systems 117 8.1.3 Processing-in-Memory 118 8.2 Tesseract Architecture 119 8.2.1 Overview 119 8.2.2 Remote Function Call via Message Passing 122 8.2.3 Prefetching 124 8.2.4 Programming Interface 126 8.2.5 Application Mapping 127 8.3 Evaluation Methodology 128 8.3.1 Simulation Configuration 128 8.3.2 Workloads 129 8.4 Evaluation Results 130 8.4.1 Performance 130 8.4.2 Iso-Bandwidth Comparison 133 8.4.3 Execution Time Breakdown 134 8.4.4 Prefetch Efficiency 134 8.4.5 Scalability 135 8.4.6 Effect of Higher Off-Chip Network Bandwidth 136 8.4.7 Effect of Better Graph Distribution 137 8.4.8 Energy/Power Consumption and Thermal Analysis 138 8.5 Summary 139 Chapter 9 PIM-Enabled Instructions 141 9.1 Potential of ISA Extensions as the PIM Interface 143 9.2 PIM Abstraction 145 9.2.1 Operations 145 9.2.2 Memory Model 147 9.2.3 Software Modification 148 9.3 Architecture 148 9.3.1 Overview 148 9.3.2 PEI Computation Unit (PCU) 149 9.3.3 PEI Management Unit (PMU) 150 9.3.4 Virtual Memory Support 153 9.3.5 PEI Execution 153 9.3.6 Comparison with Active Memory Operations 154 9.4 Target Applications for Case Study 155 9.4.1 Large-Scale Graph Processing 155 9.4.2 In-Memory Data Analytics 156 9.4.3 Machine Learning and Data Mining 157 9.4.4 Operation Summary 157 9.5 Evaluation Methodology 158 9.5.1 Simulation Configuration 158 9.5.2 Workloads 159 9.6 Evaluation Results 159 9.6.1 Performance 160 9.6.2 Sensitivity to Input Size 163 9.6.3 Multiprogrammed Workloads 164 9.6.4 Balanced Dispatch: Idea and Evaluation 165 9.6.5 Design Space Exploration for PCUs 165 9.6.6 Performance Overhead of the PMU 167 9.6.7 Energy, Area, and Thermal Issues 167 9.7 Summary 168 Chapter 10 Aggregation-in-Memory 171 10.1 Motivation 173 10.1.1 Rethinking PIM for Energy Efficiency 173 10.1.2 Aggregation as PIM Operations 174 10.2 Architecture 176 10.2.1 Overview 176 10.2.2 Programming Model 177 10.2.3 On-Chip Caches 177 10.2.4 Coherence and Consistency 181 10.2.5 Main Memory 181 10.2.6 Potential Generalization Opportunities 183 10.3 Compiler Support 184 10.4 Contributions over Prior Art 185 10.4.1 PIM-Enabled Instructions 185 10.4.2 Parallel Reduction in Caches 187 10.4.3 Row Buffer Locality of DRAM Writes 188 10.5 Target Applications 188 10.6 Evaluation Methodology 190 10.6.1 Simulation Configuration 190 10.6.2 Hardware Overhead 191 10.6.3 Workloads 192 10.7 Evaluation Results 192 10.7.1 Energy Consumption and Performance 192 10.7.2 Dynamic Energy Breakdown 196 10.7.3 Comparison with Aggressive Writeback 197 10.7.4 Multiprogrammed Workloads 198 10.7.5 Comparison with Intrinsic-based Code 198 10.8 Summary 199 Chapter 11 Conclusion 201 11.1 Energy-Efficient On-Chip Caches based on STT-RAM 202 11.2 Intelligent Main Memory based on Logic-Enabled DRAM 203 Bibliography 205 요약 227Docto