254 research outputs found
Ku-band multiple beam antenna
The frequency reuse capability is demonstrated for a Ku-band multiple beam antenna which provides contiguous low sidelobe spot beams for point-to-point communications between any two points within the continental United States (CONUS), or regional coverage beams for direct broadcast systems. A spot beam antenna in the 14/21 GHz band which provides contiguous overlapping beams covering CONUS and two discrete beams covering Hawaii and Alaska were designed, developed, and tested. Two reflector antennas are required for providing contiguous coverage of CONUS. Each is comprised of one offset parabolic reflector, one flat polarization diplexer, and two separate planar array feeds. This antenna system provides contiguous spot beam coverage of CONUS, utilizing 15 beams. Also designed, developed and demonstrated was a shaped contoured beam antenna system which provides contiguous four time zone coverage of CONUS from a single offset parabolic reflector incorporating one flat polarization diplexer and two separate planar array feeds. The beams which illuminate the eastern time zone and the mountain time zone are horizontally polarized, while the beams which illuminate the central time zone and the pacific time zone are vertically polarized. Frequency reuse is achieved by amplitude and polarization isolation
Gradient metasurfaces: a review of fundamentals and applications
In the wake of intense research on metamaterials the two-dimensional
analogue, known as metasurfaces, has attracted progressively increasing
attention in recent years due to the ease of fabrication and smaller insertion
losses, while enabling an unprecedented control over spatial distributions of
transmitted and reflected optical fields. Metasurfaces represent optically thin
planar arrays of resonant subwavelength elements that can be arranged in a
strictly or quasi periodic fashion, or even in an aperiodic manner, depending
on targeted optical wavefronts to be molded with their help. This paper reviews
a broad subclass of metasurfaces, viz. gradient metasurfaces, which are devised
to exhibit spatially varying optical responses resulting in spatially varying
amplitudes, phases and polarizations of scattered fields. Starting with
introducing the concept of gradient metasurfaces, we present classification of
different metasurfaces from the viewpoint of their responses, differentiating
electrical-dipole, geometric, reflective and Huygens' metasurfaces. The
fundamental building blocks essential for the realization of metasurfaces are
then discussed in order to elucidate the underlying physics of various physical
realizations of both plasmonic and purely dielectric metasurfaces. We then
overview the main applications of gradient metasurfaces, including waveplates,
flat lenses, spiral phase plates, broadband absorbers, color printing,
holograms, polarimeters and surface wave couplers. The review is terminated
with a short section on recently developed nonlinear metasurfaces, followed by
the outlook presenting our view on possible future developments and
perspectives for future applications.Comment: Accepted for publication in Reports on Progress in Physic
Reconfigurable Antennas
In this new book, we present a collection of the advanced developments in reconfigurable antennas and metasurfaces. It begins with a review of reconfigurability technologies, and proceeds to the presentation of a series of reconfigurable antennas, UWB MIMO antennas and reconfigurable arrays. Then, reconfigurable metasurfaces are introduced and the latest advances are presented and discussed
1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface
A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance
Beam scanning by liquid-crystal biasing in a modified SIW structure
A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium
- …